Abhilash Thanks ,
On 4/15/2025 4:43 PM, Yemike Abhilash Chandra wrote:
Add device tree nodes for two power regulators on the J721E SK board. vsys_5v0: A fixed regulator representing the 5V supply output from the LM61460 and vdd_sd_dv: A GPIO-controlled TLV71033 regulator.
J721E-SK schematics: https://www.ti.com/lit/zip/sprr438 Fixes: 1bfda92a3a36 ("arm64: dts: ti: Add support for J721E SK") Cc: stable@vger.kernel.org Signed-off-by: Yemike Abhilash Chandra y-abhilashchandra@ti.com
Changelog: Changes in v3:
Change the PIN_INPUT to PIN_OUTPUT to control the regulator.
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 31 ++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 440ef57be294..ffef3d1cfd55 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -184,6 +184,17 @@ vsys_3v3: fixedregulator-vsys3v3 { regulator-boot-on; }; [..] transceiver1: can-phy1 { compatible = "ti,tcan1042"; #phy-cells = <0>; @@ -613,6 +638,12 @@ J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */ >; };
- vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
pinctrl-single,pins = <J721E_IOPAD(0x1dc, PIN_OUTPUT, 7) /* (Y1) SPI1_CLK.GPIO0_118 */>;- };
Reviewed-by: Udit Kumar u-kumar1@ti.com
wkup_uart0_pins_default: wkup-uart0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */