From: Piyush Mehta piyush.mehta@amd.com
[ Upstream commit 63d7f9810a38102cdb8cad214fac98682081e1a7 ]
When configured in HOST mode, after issuing U3/L2 exit controller fails to send proper CRC checksum in CRC5 field. Because of this behavior Transaction Error is generated, resulting in reset and re-enumeration of usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this problem.
When this bit is set to '1', the UTMI/ULPI opmode will be changed to "normal" along with HS terminations, term, and xcvr signals after EOR. This option is to support certain legacy UTMI/ULPI PHYs.
Added "snps,resume-hs-terminations" quirk to resolved the above issue.
Signed-off-by: Piyush Mehta piyush.mehta@amd.com Link: https://lore.kernel.org/r/20220920052235.194272-3-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/core.c | 17 +++++++++++++++++ drivers/usb/dwc3/core.h | 4 ++++ 2 files changed, 21 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 4123462cac9b..4fea1fcac754 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1184,6 +1184,21 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); }
+ /* + * When configured in HOST mode, after issuing U3/L2 exit controller + * fails to send proper CRC checksum in CRC5 feild. Because of this + * behaviour Transaction Error is generated, resulting in reset and + * re-enumeration of usb device attached. All the termsel, xcvrsel, + * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1 + * will correct this problem. This option is to support certain + * legacy ULPI PHYs. + */ + if (dwc->resume_hs_terminations) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); + reg |= DWC3_GUCTL1_RESUME_OPMODE_HS_HOST; + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); + } + if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) { reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
@@ -1527,6 +1542,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis-del-phy-power-chg-quirk"); dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev, "snps,dis-tx-ipgap-linecheck-quirk"); + dwc->resume_hs_terminations = device_property_read_bool(dev, + "snps,resume-hs-terminations"); dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev, "snps,parkmode-disable-ss-quirk"); dwc->gfladj_refclk_lpm_sel = device_property_read_bool(dev, diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 11975a03316f..3ac9313e66f9 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -263,6 +263,7 @@ #define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK BIT(26) #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) #define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) +#define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST BIT(10)
/* Global Status Register */ #define DWC3_GSTS_OTG_IP BIT(10) @@ -1097,6 +1098,8 @@ struct dwc3_scratchpad_array { * change quirk. * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate * check during HS transmit. + * @resume-hs-terminations: Set if we enable quirk for fixing improper crc + * generation after resume from suspend. * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk @@ -1312,6 +1315,7 @@ struct dwc3 { unsigned dis_u2_freeclk_exists_quirk:1; unsigned dis_del_phy_power_chg_quirk:1; unsigned dis_tx_ipgap_linecheck_quirk:1; + unsigned resume_hs_terminations:1; unsigned parkmode_disable_ss_quirk:1; unsigned gfladj_refclk_lpm_sel:1;