5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Evgenii Shatokhin e.shatokhin@yadro.com
commit a37eecb705f33726f1fb7cd2a67e514a15dfe693 upstream.
If a device uses MCP23xxx IO expander to receive IRQs, the following bug can happen:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, ... preempt_count: 1, expected: 0 ... Call Trace: ... __might_resched+0x104/0x10e __might_sleep+0x3e/0x62 mutex_lock+0x20/0x4c regmap_lock_mutex+0x10/0x18 regmap_update_bits_base+0x2c/0x66 mcp23s08_irq_set_type+0x1ae/0x1d6 __irq_set_trigger+0x56/0x172 __setup_irq+0x1e6/0x646 request_threaded_irq+0xb6/0x160 ...
We observed the problem while experimenting with a touchscreen driver which used MCP23017 IO expander (I2C).
The regmap in the pinctrl-mcp23s08 driver uses a mutex for protection from concurrent accesses, which is the default for regmaps without .fast_io, .disable_locking, etc.
mcp23s08_irq_set_type() calls regmap_update_bits_base(), and the latter locks the mutex.
However, __setup_irq() locks desc->lock spinlock before calling these functions. As a result, the system tries to lock the mutex whole holding the spinlock.
It seems, the internal regmap locks are not needed in this driver at all. mcp->lock seems to protect the regmap from concurrent accesses already, except, probably, in mcp_pinconf_get/set.
mcp23s08_irq_set_type() and mcp23s08_irq_mask/unmask() are called under chip_bus_lock(), which calls mcp23s08_irq_bus_lock(). The latter takes mcp->lock and enables regmap caching, so that the potentially slow I2C accesses are deferred until chip_bus_unlock().
The accesses to the regmap from mcp23s08_probe_one() do not need additional locking.
In all remaining places where the regmap is accessed, except mcp_pinconf_get/set(), the driver already takes mcp->lock.
This patch adds locking in mcp_pinconf_get/set() and disables internal locking in the regmap config. Among other things, it fixes the sleeping in atomic context described above.
Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching") Cc: stable@vger.kernel.org Signed-off-by: Evgenii Shatokhin e.shatokhin@yadro.com Link: https://lore.kernel.org/20241209074659.1442898-1-e.shatokhin@yadro.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pinctrl/pinctrl-mcp23s08.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/drivers/pinctrl/pinctrl-mcp23s08.c +++ b/drivers/pinctrl/pinctrl-mcp23s08.c @@ -85,6 +85,7 @@ const struct regmap_config mcp23x08_regm .num_reg_defaults = ARRAY_SIZE(mcp23x08_defaults), .cache_type = REGCACHE_FLAT, .max_register = MCP_OLAT, + .disable_locking = true, /* mcp->lock protects the regmap */ }; EXPORT_SYMBOL_GPL(mcp23x08_regmap);
@@ -131,6 +132,7 @@ const struct regmap_config mcp23x17_regm .num_reg_defaults = ARRAY_SIZE(mcp23x17_defaults), .cache_type = REGCACHE_FLAT, .val_format_endian = REGMAP_ENDIAN_LITTLE, + .disable_locking = true, /* mcp->lock protects the regmap */ }; EXPORT_SYMBOL_GPL(mcp23x17_regmap);
@@ -228,7 +230,9 @@ static int mcp_pinconf_get(struct pinctr
switch (param) { case PIN_CONFIG_BIAS_PULL_UP: + mutex_lock(&mcp->lock); ret = mcp_read(mcp, MCP_GPPU, &data); + mutex_unlock(&mcp->lock); if (ret < 0) return ret; status = (data & BIT(pin)) ? 1 : 0; @@ -257,7 +261,9 @@ static int mcp_pinconf_set(struct pinctr
switch (param) { case PIN_CONFIG_BIAS_PULL_UP: + mutex_lock(&mcp->lock); ret = mcp_set_bit(mcp, MCP_GPPU, pin, arg); + mutex_unlock(&mcp->lock); break; default: dev_dbg(mcp->dev, "Invalid config param %04x\n", param);