From: "Maciej W. Rozycki" macro@orcam.me.uk
[ Upstream commit c087df8d1e7dc2e764d11234d84b5af46d500f16 ]
No Oxford Semiconductor PCI or PCIe parallel port device supports the Parallel Port FIFO mode. All support the PS/2 Parallel Port mode and the Enhanced Parallel Port mode via the ECR register. The original 5V PCI OX16PCI954 device does not support the Extended Capabilities Port mode, the Test mode or the Configuration mode, but all the other OxSemi devices do, including in particular the 3.3V PCI OXmPCI954 device and the universal voltage PCI OXuPCI954 device. All the unsupported modes are marked reserved in the relevant datasheets.
Accordingly enable the `base_hi' BAR for the 954 devices to enable PS2 and EPP mode support via the ECR register, however mask the COMPAT mode and, until we have a way to determine what chip variant it is that we poke at, also the ECP mode, and mask the COMPAT mode only for all the remaining OxSemi devices, fixing errors like:
parport0: FIFO is stuck FIFO write timed out
and a non-functional port when the Parallel Port FIFO mode is selected.
Complementing the fix apply an ECR mask for all these devices, which are documented to only permit writing to the mode field of the ECR register with a bit pattern of 00001 required to be written to bits 4:0 on mode field writes. No nFault or service interrupts are implemented, which will therefore never have to be enabled, though bit 2 does report the FIFO threshold status to be polled for in the ECP mode where supported.
We have a documented case of writing 1 to bit 2 causing a lock-up with at least one OX12PCI840 device (from old drivers/parport/ChangeLog):
2001-10-10 Tim Waugh twaugh@redhat.com
* parport_pc.c: Support for OX12PCI840 PCI card (reported by mk@daveg.com). Lock-ups diagnosed by Ronnie Arosa (and now we just don't trust its ECR).
which commit adbd321a17cc ("parport_pc: add base_hi BAR for oxsemi_840") must have broken and by applying an ECR mask here we prevent the lock-up from triggering. This could have been the reason for requiring 00001 to be written to bits 4:0 of ECR.
Update the inline comment accordingly; it has come from Linux 2.4.12 back in 2001 and predates the introduction of OXmPCI954 and OXuPCI954 devices that do support ECP.
References:
[1] "OX16PCI954 Integrated Quad UART and PCI interface", Oxford Semiconductor Ltd., Data Sheet Revision 1.3, Feb. 1999, Chapter 9 "Bidirectional Parallel Port", pp. 53-55
[2] "OX16PCI952 Data Sheet, Integrated High Performance Dual UARTs, Parallel Port and 5.0v PCI interface", Oxford Semiconductor Ltd., DS_B008A_00, Datasheet rev 1.1, June 2001, Chapter 8 "Bi-directional Parallel Port", pp. 52-56
[3] "OXmPCI954 DATA SHEET Integrated High Performance Quad UARTs, 8-bit Local Bus/Parallel Port. 3.3v PCI/miniPCI interface.", Oxford Semiconductor Ltd., DS-0019, June 2005, Chapter 10 "Bidirectional Parallel Port", pp. 86-90
[4] "OXmPCI952 Data Sheet, Integrated High Performance Dual UARTs, 8-bit Local Bus/Parallel Port. 3.3v PCI/miniPCI interface.", Oxford Semiconductor Ltd., DS-0020, June 2005, Chapter 8 "Bidirectional Parallel Port", pp. 73-77
[5] "OX12PCI840 Integrated Parallel Port and PCI interface", Oxford Semiconductor Ltd., DS-0021, Jun 2005, Chapter 5 "Bi-directional Parallel Port", pp. 18-21
[6] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port", Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Chapter "Parallel Port Function", pp. 59-62
[7] "OXPCIe840 PCI Express Bridge to Parallel Port", Oxford Semiconductor, Inc., DS-0049, Mar 06 08, Chapter "Parallel Port Function", pp. 15-18
[8] "OXuPCI954 Data Sheet, Integrated High Performance Quad UARTs, 8-bit Local Bus/Parallel Port, 3.3 V and 5 V (Universal Voltage) PCI Interface.", Oxford Semiconductor, Inc., DS-0058, 26 Jan 2009, Chapter 8 "Bidirectional Parallel Port", pp. 62-65
[9] "OXuPCI952 Data Sheet, Integrated High Performance Dual UARTs, 8-bit Local Bus/Parallel Port, 3.3 V and 5.0 V Universal Voltage PCI Interface.", Oxford Semiconductor, Inc., DS-0059, Sep 2007, Chapter 8 "Bidirectional Parallel Port", pp. 61-64
Signed-off-by: Maciej W. Rozycki macro@orcam.me.uk Signed-off-by: Sudip Mukherjee sudipm.mukherjee@gmail.com Link: https://lore.kernel.org/r/20230108215656.6433-6-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/parport/parport_pc.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 3bc0027b7844b..6ebf2a3e9f04d 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2692,12 +2692,19 @@ static struct parport_pc_pci { /* titan_010l */ { 1, { { 3, -1 }, } }, /* avlab_1p */ { 1, { { 0, 1}, } }, /* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} }, - /* The Oxford Semi cards are unusual: 954 doesn't support ECP, - * and 840 locks up if you write 1 to bit 2! */ - /* oxsemi_952 */ { 1, { { 0, 1 }, } }, - /* oxsemi_954 */ { 1, { { 0, -1 }, } }, - /* oxsemi_840 */ { 1, { { 0, 1 }, } }, - /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, + /* The Oxford Semi cards are unusual: older variants of 954 don't + * support ECP, and 840 locks up if you write 1 to bit 2! None + * implement nFault or service interrupts and all require 00001 + * bit pattern to be used for bits 4:0 with ECR writes. */ + /* oxsemi_952 */ { 1, { { 0, 1 }, }, + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, + /* oxsemi_954 */ { 1, { { 0, 1 }, }, + PARPORT_MODE_ECP | + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, + /* oxsemi_840 */ { 1, { { 0, 1 }, }, + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, + /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, }, + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } },