octeontx2 crypto driver allocates memory using kmalloc/kzalloc, and uses this memory for dma (does dma_map_single()). It assumes that kmalloc/kzalloc will return 128-byte aligned address. But kmalloc/kzalloc returns 8-byte aligned address after below changes: "9382bc44b5f5 arm64: allow kmalloc() caches aligned to the smaller cache_line_size()
Memory allocated are used for following purpose: - Input data or scatter list address - 8-Byte alignment - Output data or gather list address - 8-Byte alignment - Completion address - 32-Byte alignment.
This patch ensures all addresses are aligned as mentioned above.
Signed-off-by: Bharat Bhushan bbhushan2@marvell.com --- .../marvell/octeontx2/otx2_cpt_reqmgr.h | 57 ++++++++++++++----- 1 file changed, 42 insertions(+), 15 deletions(-)
diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h index f0f1ff45c383..b49dafc596c7 100644 --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h @@ -350,22 +350,45 @@ static inline struct otx2_cpt_inst_info * cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, gfp_t gfp) { - u32 dlen = 0, g_len, sg_len, info_len; - int align = OTX2_CPT_DMA_MINALIGN; + u32 dlen = 0, g_len, s_len, sg_len, info_len; struct otx2_cpt_inst_info *info; - u16 g_sz_bytes, s_sz_bytes; u32 total_mem_len; int i;
- g_sz_bytes = ((req->in_cnt + 2) / 3) * - sizeof(struct cn10kb_cpt_sglist_component); - s_sz_bytes = ((req->out_cnt + 2) / 3) * - sizeof(struct cn10kb_cpt_sglist_component); + /* Allocate memory to meet below alignment requirement: + * ---------------------------------- + * | struct otx2_cpt_inst_info | + * | (No alignment required) | + * | -----------------------------| + * | | padding for 8B alignment | + * |----------------------------------| + * | SG List Gather/Input memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * |----------------------------------| + * | SG List Scatter/Output memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * | (padding for below alignment) | + * | -----------------------------| + * | | padding for 32B alignment | + * |----------------------------------| + * | Result response memory | + * ---------------------------------- + */ + + info_len = sizeof(*info);
- g_len = ALIGN(g_sz_bytes, align); - sg_len = ALIGN(g_len + s_sz_bytes, align); - info_len = ALIGN(sizeof(*info), align); - total_mem_len = sg_len + info_len + sizeof(union otx2_cpt_res_s); + g_len = ((req->in_cnt + 2) / 3) * + sizeof(struct cn10kb_cpt_sglist_component); + s_len = ((req->out_cnt + 2) / 3) * + sizeof(struct cn10kb_cpt_sglist_component); + sg_len = g_len + s_len; + + /* Allocate extra memory for SG and response address alignment */ + total_mem_len = ALIGN(info_len, OTX2_CPT_DPTR_RPTR_ALIGN) + sg_len; + total_mem_len = ALIGN(total_mem_len, OTX2_CPT_RES_ADDR_ALIGN) + + sizeof(union otx2_cpt_res_s);
info = kzalloc(total_mem_len, gfp); if (unlikely(!info)) @@ -375,7 +398,9 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, dlen += req->in[i].size;
info->dlen = dlen; - info->in_buffer = (u8 *)info + info_len; + info->in_buffer = PTR_ALIGN((u8 *)info + info_len, + OTX2_CPT_DPTR_RPTR_ALIGN); + info->out_buffer = info->in_buffer + g_len; info->gthr_sz = req->in_cnt; info->sctr_sz = req->out_cnt;
@@ -387,7 +412,7 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, }
if (sgv2io_components_setup(pdev, req->out, req->out_cnt, - &info->in_buffer[g_len])) { + info->out_buffer)) { dev_err(&pdev->dev, "Failed to setup scatter list\n"); goto destroy_info; } @@ -404,8 +429,10 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, * Get buffer for union otx2_cpt_res_s response * structure and its physical address */ - info->completion_addr = info->in_buffer + sg_len; - info->comp_baddr = info->dptr_baddr + sg_len; + info->completion_addr = PTR_ALIGN((info->in_buffer + sg_len), + OTX2_CPT_RES_ADDR_ALIGN); + info->comp_baddr = ALIGN((info->dptr_baddr + sg_len), + OTX2_CPT_RES_ADDR_ALIGN);
return info;