From: Judith Mendez jm@ti.com
[ Upstream commit db3cd905b8c8cd40f15a34e30a225704bb8a2fcb ]
The bootph-all flag was introduced in dt-schema (dtschema/schemas/bootph.yaml) to define node usage across different boot phases.
For eMMC and SD boot modes, voltage regulator nodes, io-expander nodes, gpio nodes, and MMC nodes need to be present in all boot stages, so add missing bootph-all phase flag to these nodes to support SD boot and eMMC boot.
Signed-off-by: Judith Mendez jm@ti.com Reviewed-by: Moteen Shah m-shah@ti.com Link: https://lore.kernel.org/r/20250429151454.4160506-2-jm@ti.com Signed-off-by: Nishanth Menon nm@ti.com Stable-dep-of: a0b8da04153e ("arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 12 ++++++++++++ arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 ++ 2 files changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index 8e9fc00a6b3c..aafdb90c0eb7 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -69,6 +69,7 @@ vddshv_sdio: regulator-4 { gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; states = <1800000 0x0>, <3300000 0x1>; + bootph-all; }; };
@@ -77,12 +78,14 @@ vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ >; + bootph-all; };
main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */ >; + bootph-all; };
pmic_irq_pins_default: pmic-irq-default-pins { @@ -118,6 +121,7 @@ exp1: gpio@22 {
pinctrl-names = "default"; pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + bootph-all; };
exp2: gpio@23 { @@ -229,6 +233,14 @@ &tlv320aic3106 { DVDD-supply = <&buck2_reg>; };
+&main_gpio0 { + bootph-all; +}; + +&main_gpio1 { + bootph-all; +}; + &gpmc0 { ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */ }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 67faf46d7a35..212119959dfd 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -301,6 +301,7 @@ AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ >; + bootph-all; };
main_mmc1_pins_default: main-mmc1-default-pins { @@ -603,6 +604,7 @@ &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; disable-wp; + bootph-all; };
&sdhci1 {