6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arkadiusz Bokowy arkadiusz.bokowy@gmail.com
[ Upstream commit 7722d6fb54e428a8f657fccf422095a8d7e2d72c ]
Some Barrot based USB Bluetooth dongles erroneously send one extra random byte for the HCI_OP_READ_LOCAL_EXT_FEATURES command. The consequence of that is that the next HCI transfer is misaligned by one byte causing undefined behavior. In most cases the response event for the next command fails with random error code.
Since the HCI_OP_READ_LOCAL_EXT_FEATURES command is used during HCI controller initialization, the initialization fails rendering the USB dongle not usable.
[59.464099] usb 1-1.3: new full-speed USB device number 11 using xhci_hcd [59.561617] usb 1-1.3: New USB device found, idVendor=33fa, idProduct=0012, bcdDevice=88.91 [59.561642] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [59.561656] usb 1-1.3: Product: UGREEN BT6.0 Adapter [61.720116] Bluetooth: hci1: command 0x1005 tx timeout [61.720167] Bluetooth: hci1: Opcode 0x1005 failed: -110
This patch was tested with the 33fa:0012 device. The info from the /sys/kernel/debug/usb/devices is shown below:
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 12 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=33fa ProdID=0012 Rev=88.91 S: Product=UGREEN BT6.0 Adapter C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Now the device is initialized properly:
[43.329852] usb 1-1.4: new full-speed USB device number 4 using dwc_otg [43.446790] usb 1-1.4: New USB device found, idVendor=33fa, idProduct=0012, bcdDevice=88.91 [43.446813] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [43.446821] usb 1-1.4: Product: UGREEN BT6.0 Adapter [43.582024] Bluetooth: hci1: Unexpected continuation: 1 bytes [43.703025] Bluetooth: hci1: Unexpected continuation: 1 bytes [43.750141] Bluetooth: MGMT ver 1.23
Link: https://github.com/bluez/bluez/issues/1326 Signed-off-by: Arkadiusz Bokowy arkadiusz.bokowy@gmail.com Tested-by: Arkadiusz Bokowy arkadiusz.bokowy@gmail.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btusb.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 4c21230aee460..23a9a221056a4 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -65,6 +65,7 @@ static struct usb_driver btusb_driver; #define BTUSB_INTEL_BROKEN_INITIAL_NCMD BIT(25) #define BTUSB_INTEL_NO_WBS_SUPPORT BIT(26) #define BTUSB_ACTIONS_SEMI BIT(27) +#define BTUSB_BARROT BIT(28)
static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -770,6 +771,10 @@ static const struct usb_device_id quirks_table[] = { { USB_DEVICE(0x0cb5, 0xc547), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH },
+ /* Barrot Technology Bluetooth devices */ + { USB_DEVICE(0x33fa, 0x0010), .driver_info = BTUSB_BARROT }, + { USB_DEVICE(0x33fa, 0x0012), .driver_info = BTUSB_BARROT }, + /* Actions Semiconductor ATS2851 based devices */ { USB_DEVICE(0x10d7, 0xb012), .driver_info = BTUSB_ACTIONS_SEMI },
@@ -1167,6 +1172,18 @@ static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count) }
if (!hci_skb_expect(skb)) { + /* Each chunk should correspond to at least 1 or more + * events so if there are still bytes left that doesn't + * constitute a new event this is likely a bug in the + * controller. + */ + if (count && count < HCI_EVENT_HDR_SIZE) { + bt_dev_warn(data->hdev, + "Unexpected continuation: %d bytes", + count); + count = 0; + } + /* Complete frame */ btusb_recv_event(data, skb); skb = NULL;