From: Lubomir Rintel lkundrak@v3.sk
[ Upstream commit f36797ee43802b367e59f0f9a9805304a4ff0c98 ]
The device-tree booted MMP2 needs to enable the timer clock, otherwise it would stop ticking when the boot finishes.
It can also use the clock rate from the clk, the non-DT boards need to keep using the hardcoded rates.
Signed-off-by: Lubomir Rintel lkundrak@v3.sk Acked-by: Pavel Machek pavel@ucw.cz Signed-off-by: Olof Johansson olof@lixom.net Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-mmp/common.h | 2 +- arch/arm/mach-mmp/mmp2.c | 2 +- arch/arm/mach-mmp/pxa168.c | 2 +- arch/arm/mach-mmp/time.c | 32 ++++++++++++++++++++------------ 4 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h index cf445bae6d77..69c7eec6d1e0 100644 --- a/arch/arm/mach-mmp/common.h +++ b/arch/arm/mach-mmp/common.h @@ -1,7 +1,7 @@ #include <linux/reboot.h> #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-extern void timer_init(int irq); +extern void timer_init(int irq, unsigned long rate);
extern void __init mmp_map_io(void); extern void mmp_restart(enum reboot_mode, const char *); diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index a70b5530bd42..90a0d8114af2 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -133,7 +133,7 @@ void __init mmp2_timer_init(void) clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1); __raw_writel(clk_rst, APBC_TIMERS);
- timer_init(IRQ_MMP2_TIMER1); + timer_init(IRQ_MMP2_TIMER1, 6500000); }
/* on-chip devices */ diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 144e997624c0..5a616db7f392 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -78,7 +78,7 @@ void __init pxa168_timer_init(void) /* 3.25MHz, bus/functional clock enabled, release reset */ __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
- timer_init(IRQ_PXA168_TIMER1); + timer_init(IRQ_PXA168_TIMER1, 6500000); }
void pxa168_clear_keypad_wakeup(void) diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 2756351dbb35..b66ea443f154 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/clockchips.h> +#include <linux/clk.h>
#include <linux/io.h> #include <linux/irq.h> @@ -39,12 +40,6 @@
#include "clock.h"
-#ifdef CONFIG_CPU_MMP2 -#define MMP_CLOCK_FREQ 6500000 -#else -#define MMP_CLOCK_FREQ 3250000 -#endif - #define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
#define MAX_DELTA (0xfffffffe) @@ -197,19 +192,18 @@ static struct irqaction timer_irq = { .dev_id = &ckevt, };
-void __init timer_init(int irq) +void __init timer_init(int irq, unsigned long rate) { timer_config();
- sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ); + sched_clock_register(mmp_read_sched_clock, 32, rate);
ckevt.cpumask = cpumask_of(0);
setup_irq(irq, &timer_irq);
- clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ); - clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ, - MIN_DELTA, MAX_DELTA); + clocksource_register_hz(&cksrc, rate); + clockevents_config_and_register(&ckevt, rate, MIN_DELTA, MAX_DELTA); }
#ifdef CONFIG_OF @@ -221,7 +215,9 @@ static struct of_device_id mmp_timer_dt_ids[] = { void __init mmp_dt_init_timer(void) { struct device_node *np; + struct clk *clk; int irq, ret; + unsigned long rate;
np = of_find_matching_node(NULL, mmp_timer_dt_ids); if (!np) { @@ -229,6 +225,18 @@ void __init mmp_dt_init_timer(void) goto out; }
+ clk = of_clk_get(np, 0); + if (!IS_ERR(clk)) { + ret = clk_prepare_enable(clk); + if (ret) + goto out; + rate = clk_get_rate(clk) / 2; + } else if (cpu_is_pj4()) { + rate = 6500000; + } else { + rate = 3250000; + } + irq = irq_of_parse_and_map(np, 0); if (!irq) { ret = -EINVAL; @@ -239,7 +247,7 @@ void __init mmp_dt_init_timer(void) ret = -ENOMEM; goto out; } - timer_init(irq); + timer_init(irq, rate); return; out: pr_err("Failed to get timer from device tree with error:%d\n", ret);