From: Brett Creeley brett.creeley@intel.com
[ Upstream commit a6aa7c8f998f4afddd73410aa043dad38162ce9e ]
Currently if an AVF driver doesn't account for the possibility of a port VLAN when determining its max packet size then packets at MTU will be dropped. It is not the VF driver's responsibility to account for a port VLAN so fix this. To fix this, do the following:
1. Add a function that determines the max packet size a VF is allowed by using the port's max packet size and whether the VF is in a port VLAN. If a port VLAN is configured then a VF's max packet size will always be the port's max packet size minus VLAN_HLEN. Otherwise it will be the port's max packet size.
2. Use this function to verify the max packet size from the VF.
3. If there is a port VLAN configured then add 4 bytes (VLAN_HLEN) to the VF's max packet size configuration.
Also, the VIRTCHNL_OP_GET_VF_RESOURCES message provides the capability to communicate a VF's max packet size. Use the new function for this purpose.
Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Brett Creeley brett.creeley@intel.com Tested-by: Tony Brelinski tonyx.brelinski@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/intel/ice/ice_virtchnl_pf.c | 33 ++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c index ec7f6c64132ee..b3161c5def465 100644 --- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c @@ -1878,6 +1878,29 @@ static int ice_vc_get_ver_msg(struct ice_vf *vf, u8 *msg) sizeof(struct virtchnl_version_info)); }
+/** + * ice_vc_get_max_frame_size - get max frame size allowed for VF + * @vf: VF used to determine max frame size + * + * Max frame size is determined based on the current port's max frame size and + * whether a port VLAN is configured on this VF. The VF is not aware whether + * it's in a port VLAN so the PF needs to account for this in max frame size + * checks and sending the max frame size to the VF. + */ +static u16 ice_vc_get_max_frame_size(struct ice_vf *vf) +{ + struct ice_vsi *vsi = vf->pf->vsi[vf->lan_vsi_idx]; + struct ice_port_info *pi = vsi->port_info; + u16 max_frame_size; + + max_frame_size = pi->phy.link_info.max_frame_size; + + if (vf->port_vlan_info) + max_frame_size -= VLAN_HLEN; + + return max_frame_size; +} + /** * ice_vc_get_vf_res_msg * @vf: pointer to the VF info @@ -1960,6 +1983,7 @@ static int ice_vc_get_vf_res_msg(struct ice_vf *vf, u8 *msg) vfres->max_vectors = pf->num_msix_per_vf; vfres->rss_key_size = ICE_VSIQF_HKEY_ARRAY_SIZE; vfres->rss_lut_size = ICE_VSIQF_HLUT_ARRAY_SIZE; + vfres->max_mtu = ice_vc_get_max_frame_size(vf);
vfres->vsi_res[0].vsi_id = vf->lan_vsi_num; vfres->vsi_res[0].vsi_type = VIRTCHNL_VSI_SRIOV; @@ -2952,6 +2976,8 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg)
/* copy Rx queue info from VF into VSI */ if (qpi->rxq.ring_len > 0) { + u16 max_frame_size = ice_vc_get_max_frame_size(vf); + num_rxq++; vsi->rx_rings[i]->dma = qpi->rxq.dma_ring_addr; vsi->rx_rings[i]->count = qpi->rxq.ring_len; @@ -2964,7 +2990,7 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg) } vsi->rx_buf_len = qpi->rxq.databuffer_size; vsi->rx_rings[i]->rx_buf_len = vsi->rx_buf_len; - if (qpi->rxq.max_pkt_size >= (16 * 1024) || + if (qpi->rxq.max_pkt_size > max_frame_size || qpi->rxq.max_pkt_size < 64) { v_ret = VIRTCHNL_STATUS_ERR_PARAM; goto error_param; @@ -2972,6 +2998,11 @@ static int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg) }
vsi->max_frame = qpi->rxq.max_pkt_size; + /* add space for the port VLAN since the VF driver is not + * expected to account for it in the MTU calculation + */ + if (vf->port_vlan_info) + vsi->max_frame += VLAN_HLEN; }
/* VF can request to configure less than allocated queues or default