4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej S. Szmigiero mail@maciej.szmigiero.name
commit 95691e3eddc41da2d1cd3cca51fecdfb46bd85bc upstream.
Currently, "disable_clkrun" yenta_socket module parameter is only implemented for TI CardBus bridges. Add also an implementation for Ricoh bridges that have the necessary setting documented in publicly available datasheets.
Tested on a RL5C476II with a Sunrich C-160 CardBus NIC that doesn't work correctly unless the CLKRUN protocol is disabled.
Let's also make it clear in its description that the "disable_clkrun" module parameter only works on these two previously mentioned brands of CardBus bridges.
Signed-off-by: Maciej S. Szmigiero mail@maciej.szmigiero.name Cc: stable@vger.kernel.org Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/pcmcia/ricoh.h | 35 +++++++++++++++++++++++++++++++++++ drivers/pcmcia/yenta_socket.c | 3 ++- 2 files changed, 37 insertions(+), 1 deletion(-)
--- a/drivers/pcmcia/ricoh.h +++ b/drivers/pcmcia/ricoh.h @@ -119,6 +119,10 @@ #define RL5C4XX_MISC_CONTROL 0x2F /* 8 bit */ #define RL5C4XX_ZV_ENABLE 0x08
+/* Misc Control 3 Register */ +#define RL5C4XX_MISC3 0x00A2 /* 16 bit */ +#define RL5C47X_MISC3_CB_CLKRUN_DIS BIT(1) + #ifdef __YENTA_H
#define rl_misc(socket) ((socket)->private[0]) @@ -156,6 +160,35 @@ static void ricoh_set_zv(struct yenta_so } }
+static void ricoh_set_clkrun(struct yenta_socket *socket, bool quiet) +{ + u16 misc3; + + /* + * RL5C475II likely has this setting, too, however no datasheet + * is publicly available for this chip + */ + if (socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C476 && + socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C478) + return; + + if (socket->dev->revision < 0x80) + return; + + misc3 = config_readw(socket, RL5C4XX_MISC3); + if (misc3 & RL5C47X_MISC3_CB_CLKRUN_DIS) { + if (!quiet) + dev_dbg(&socket->dev->dev, + "CLKRUN feature already disabled\n"); + } else if (disable_clkrun) { + if (!quiet) + dev_info(&socket->dev->dev, + "Disabling CLKRUN feature\n"); + misc3 |= RL5C47X_MISC3_CB_CLKRUN_DIS; + config_writew(socket, RL5C4XX_MISC3, misc3); + } +} + static void ricoh_save_state(struct yenta_socket *socket) { rl_misc(socket) = config_readw(socket, RL5C4XX_MISC); @@ -172,6 +205,7 @@ static void ricoh_restore_state(struct y config_writew(socket, RL5C4XX_16BIT_IO_0, rl_io(socket)); config_writew(socket, RL5C4XX_16BIT_MEM_0, rl_mem(socket)); config_writew(socket, RL5C4XX_CONFIG, rl_config(socket)); + ricoh_set_clkrun(socket, true); }
@@ -197,6 +231,7 @@ static int ricoh_override(struct yenta_s config_writew(socket, RL5C4XX_CONFIG, config);
ricoh_set_zv(socket); + ricoh_set_clkrun(socket, false);
return 0; } --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -26,7 +26,8 @@
static bool disable_clkrun; module_param(disable_clkrun, bool, 0444); -MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option"); +MODULE_PARM_DESC(disable_clkrun, + "If PC card doesn't function properly, please try this option (TI and Ricoh bridges only)");
static bool isa_probe = 1; module_param(isa_probe, bool, 0444);