From: Guenter Roeck linux@roeck-us.net
[ Upstream commit f74b68c61cbc4b2245022fcce038509333d63f6f ]
In some situations, the following error messages are reported.
dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 1 - ChHltd set, but reason is unknown dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04000021
This is sometimes followed by:
dwc2 ff540000.usb: dwc2_update_urb_state_abn(): trimming xfer length
and then:
WARNING: CPU: 0 PID: 0 at kernel/v4.19/drivers/usb/dwc2/hcd.c:2913 dwc2_assign_and_init_hc+0x98c/0x990
The warning suggests that an odd buffer address is to be used for DMA.
After an error is observed, the receive buffer may be full (urb->actual_length >= urb->length). However, the urb is still left in the queue unless three errors were observed in a row. When it is queued again, the dwc2 hcd code translates this into a 1-block transfer. If urb->actual_length (ie the total expected receive length) is not DMA-aligned, the buffer pointer programmed into the chip will be unaligned. This results in the observed warning.
To solve the problem, abort input transactions after an error with unknown cause if the entire packet was already received. This may be a bit drastic, but we don't really know why the transfer was aborted even though the entire packet was received. Aborting the transfer in this situation is less risky than accepting a potentially corrupted packet.
With this patch in place, the 'ChHltd set' and 'trimming xfer length' messages are still observed, but there are no more transfer attempts with odd buffer addresses.
Fixes: 151d0cbdbe860 ("usb: dwc2: make the scheduler handle excessive NAKs better") Cc: Boris ARZUR boris@konbu.org Cc: Douglas Anderson dianders@chromium.org Tested-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de Reviewed-by: Douglas Anderson dianders@chromium.org Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de Link: https://lore.kernel.org/r/20210113112052.17063-3-nsaenzjulienne@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc2/hcd_intr.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index 8066fa9ac97ba..c80bfd353758b 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -1921,6 +1921,18 @@ error: qtd->error_count++; dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, qtd, DWC2_HC_XFER_XACT_ERR); + /* + * We can get here after a completed transaction + * (urb->actual_length >= urb->length) which was not reported + * as completed. If that is the case, and we do not abort + * the transfer, a transfer of size 0 will be enqueued + * subsequently. If urb->actual_length is not DMA-aligned, + * the buffer will then point to an unaligned address, and + * the resulting behavior is undefined. Bail out in that + * situation. + */ + if (qtd->urb->actual_length >= qtd->urb->length) + qtd->error_count = 3; dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR); }