6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jared McArthur j-mcarthur@ti.com
[ Upstream commit b7af8b4acb3e08c710cd48f098ce8cd07cf43a1e ]
Commit 0d0a0b441346 ("arm64: dts: ti: k3-j7200: fix main pinmux range") split the main_pmx0 into two nodes: main_pmx0 and main_pmx1 due to a non-addressable region, but incorrectly represented the ranges. As a result, the memory map for the pinctrl is incorrect. Fix this by introducing the correct ranges.
The ranges are taken from the J7200 TRM [1] (Table 5-695. CTRL_MMR0 Registers).
Padconfig starting addresses and ranges: - 0 to 66: 0x11c000, 0x10c - 68: 0x11c110, 0x004 - 71 to 73: 0x11c11c, 0x00c - 89 to 90: 0x11c164, 0x008
The datasheet [2] doesn't contain PADCONFIG63 (Table 6-106. Pin Multiplexing), but the pin is necessary for enabling the MMC1 CLKLP pad loopback and should be included in the pinmux register map.
Due to the change in pinmux node addresses, change the pinmux node for the USB0_DRVVBUS pin to main_pmx2. The offset has not changed since the new main_pmx2 node has the same base address and range as the original main_pmx1 node. All other pinmuxing done within J7200 dts or dtso files only uses main_pmx0 which has not changed.
[1] https://www.ti.com/lit/pdf/spruiu1 [2] https://www.ti.com/lit/gpn/dra821u
Fixes: 0d0a0b441346 ("arm64: dts: ti: k3-j7200: fix main pinmux range") Signed-off-by: Aniket Limaye a-limaye@ti.com Signed-off-by: Jared McArthur j-mcarthur@ti.com Reviewed-by: Vaishnav Achath vaishnav.a@ti.com Link: https://lore.kernel.org/r/20240926102533.398139-1-a-limaye@ti.com Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../dts/ti/k3-j7200-common-proc-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 22 +++++++++++++++++-- 2 files changed, 21 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 6593c5da82c06..df39f2b1ff6ba 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -254,7 +254,7 @@ J721E_IOPAD(0x38, PIN_OUTPUT, 0) /* (Y21) MCAN3_TX */ }; };
-&main_pmx1 { +&main_pmx2 { main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 9386bf3ef9f68..41adfa64418d0 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -426,10 +426,28 @@ main_pmx0: pinctrl@11c000 { pinctrl-single,function-mask = <0xffffffff>; };
- main_pmx1: pinctrl@11c11c { + main_pmx1: pinctrl@11c110 { compatible = "ti,j7200-padconf", "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x00 0x11c11c 0x00 0xc>; + reg = <0x00 0x11c110 0x00 0x004>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_pmx2: pinctrl@11c11c { + compatible = "ti,j7200-padconf", "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x11c11c 0x00 0x00c>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_pmx3: pinctrl@11c164 { + compatible = "ti,j7200-padconf", "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x11c164 0x00 0x008>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>;