From: James Smart jsmart2021@gmail.com
[ Upstream commit 7dd2e2a923173d637c272e483966be8e96a72b64 ]
Extraneous teardown routines are present in the firmware dump path causing altered states in firmware captures.
When a firmware dump is requested via sysfs, trigger the dump immediately without tearing down structures and changing adapter state.
The driver shall rely on pre-existing firmware error state clean up handlers to restore the adapter.
Link: https://lore.kernel.org/r/20211204002644.116455-6-jsmart2021@gmail.com Co-developed-by: Justin Tee justin.tee@broadcom.com Signed-off-by: Justin Tee justin.tee@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc.h | 2 +- drivers/scsi/lpfc/lpfc_attr.c | 62 ++++++++++++++++++++------------ drivers/scsi/lpfc/lpfc_hbadisc.c | 8 ++++- drivers/scsi/lpfc/lpfc_sli.c | 6 ---- 4 files changed, 48 insertions(+), 30 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 8943d42fc406e..0b69f4f713778 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -735,7 +735,6 @@ struct lpfc_hba { #define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */ #define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */ #define HBA_IOQ_FLUSH 0x8000 /* FCP/NVME I/O queues being flushed */ -#define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */ #define HBA_RECOVERABLE_UE 0x20000 /* Firmware supports recoverable UE */ #define HBA_FORCED_LINK_SPEED 0x40000 /* * Firmware supports Forced Link Speed @@ -744,6 +743,7 @@ struct lpfc_hba { #define HBA_FLOGI_ISSUED 0x100000 /* FLOGI was issued */ #define HBA_DEFER_FLOGI 0x800000 /* Defer FLOGI till read_sparm cmpl */
+ struct completion *fw_dump_cmpl; /* cmpl event tracker for fw_dump */ uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/ struct lpfc_dmabuf slim2p;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index f0ecfe565660a..1c541a600149b 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1537,25 +1537,25 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) before_fc_flag = phba->pport->fc_flag; sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn;
- /* Disable SR-IOV virtual functions if enabled */ - if (phba->cfg_sriov_nr_virtfn) { - pci_disable_sriov(pdev); - phba->cfg_sriov_nr_virtfn = 0; - } + if (opcode == LPFC_FW_DUMP) { + init_completion(&online_compl); + phba->fw_dump_cmpl = &online_compl; + } else { + /* Disable SR-IOV virtual functions if enabled */ + if (phba->cfg_sriov_nr_virtfn) { + pci_disable_sriov(pdev); + phba->cfg_sriov_nr_virtfn = 0; + }
- if (opcode == LPFC_FW_DUMP) - phba->hba_flag |= HBA_FW_DUMP_OP; + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
- status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); + if (status != 0) + return status;
- if (status != 0) { - phba->hba_flag &= ~HBA_FW_DUMP_OP; - return status; + /* wait for the device to be quiesced before firmware reset */ + msleep(100); }
- /* wait for the device to be quiesced before firmware reset */ - msleep(100); - reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);
@@ -1584,24 +1584,42 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "3153 Fail to perform the requested " "access: x%x\n", reg_val); + if (phba->fw_dump_cmpl) + phba->fw_dump_cmpl = NULL; return rc; }
/* keep the original port state */ - if (before_fc_flag & FC_OFFLINE_MODE) - goto out; - - init_completion(&online_compl); - job_posted = lpfc_workq_post_event(phba, &status, &online_compl, - LPFC_EVT_ONLINE); - if (!job_posted) + if (before_fc_flag & FC_OFFLINE_MODE) { + if (phba->fw_dump_cmpl) + phba->fw_dump_cmpl = NULL; goto out; + }
- wait_for_completion(&online_compl); + /* Firmware dump will trigger an HA_ERATT event, and + * lpfc_handle_eratt_s4 routine already handles bringing the port back + * online. + */ + if (opcode == LPFC_FW_DUMP) { + wait_for_completion(phba->fw_dump_cmpl); + } else { + init_completion(&online_compl); + job_posted = lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_ONLINE); + if (!job_posted) + goto out;
+ wait_for_completion(&online_compl); + } out: /* in any case, restore the virtual functions enabled as before */ if (sriov_nr_virtfn) { + /* If fw_dump was performed, first disable to clean up */ + if (opcode == LPFC_FW_DUMP) { + pci_disable_sriov(pdev); + phba->cfg_sriov_nr_virtfn = 0; + } + sriov_err = lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn); if (!sriov_err) diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 0dc1d56ff4709..0abce779fbb13 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -628,10 +628,16 @@ lpfc_work_done(struct lpfc_hba *phba) if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) lpfc_sli4_post_async_mbox(phba);
- if (ha_copy & HA_ERATT) + if (ha_copy & HA_ERATT) { /* Handle the error attention event */ lpfc_handle_eratt(phba);
+ if (phba->fw_dump_cmpl) { + complete(phba->fw_dump_cmpl); + phba->fw_dump_cmpl = NULL; + } + } + if (ha_copy & HA_MBATT) lpfc_sli_handle_mb_event(phba);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 51bab0979527b..bd908dd273078 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4498,12 +4498,6 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba) phba->fcf.fcf_flag = 0; spin_unlock_irq(&phba->hbalock);
- /* SLI4 INTF 2: if FW dump is being taken skip INIT_PORT */ - if (phba->hba_flag & HBA_FW_DUMP_OP) { - phba->hba_flag &= ~HBA_FW_DUMP_OP; - return rc; - } - /* Now physically reset the device */ lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0389 Performing PCI function reset!\n");