6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthias Proske email@matthias-proske.de
[ Upstream commit 8c3170628a9ce24a59647bd24f897e666af919b8 ]
After commit 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card unless WOWL is used"), the wifi adapter by default is turned off on suspend and then re-probed on resume.
This conflicts with some embedded boards that require to remain powered. They will fail on resume with:
brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout ieee80211 phy1: brcmf_bus_started: failed: -110 ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110 brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
This commit checks for the Device Tree property 'cap-power-off-cards'. If this property is not set, it means that we do not have the capability to power off and should therefore remain powered.
Signed-off-by: Matthias Proske email@matthias-proske.de Acked-by: Arend van Spriel arend.vanspriel@broadcom.com Link: https://patch.msgid.link/20250212185941.146958-2-email@matthias-proske.de Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../broadcom/brcm80211/brcmfmac/bcmsdh.c | 20 ++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c index 8a1e337642448..cfdd92564060a 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c @@ -1167,6 +1167,7 @@ static int brcmf_ops_sdio_suspend(struct device *dev) struct brcmf_bus *bus_if; struct brcmf_sdio_dev *sdiodev; mmc_pm_flag_t sdio_flags; + bool cap_power_off; int ret = 0;
func = container_of(dev, struct sdio_func, dev); @@ -1174,19 +1175,23 @@ static int brcmf_ops_sdio_suspend(struct device *dev) if (func->num != 1) return 0;
+ cap_power_off = !!(func->card->host->caps & MMC_CAP_POWER_OFF_CARD);
bus_if = dev_get_drvdata(dev); sdiodev = bus_if->bus_priv.sdio;
- if (sdiodev->wowl_enabled) { + if (sdiodev->wowl_enabled || !cap_power_off) { brcmf_sdiod_freezer_on(sdiodev); brcmf_sdio_wd_timer(sdiodev->bus, 0);
sdio_flags = MMC_PM_KEEP_POWER; - if (sdiodev->settings->bus.sdio.oob_irq_supported) - enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr); - else - sdio_flags |= MMC_PM_WAKE_SDIO_IRQ; + + if (sdiodev->wowl_enabled) { + if (sdiodev->settings->bus.sdio.oob_irq_supported) + enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr); + else + sdio_flags |= MMC_PM_WAKE_SDIO_IRQ; + }
if (sdio_set_host_pm_flags(sdiodev->func1, sdio_flags)) brcmf_err("Failed to set pm_flags %x\n", sdio_flags); @@ -1208,18 +1213,19 @@ static int brcmf_ops_sdio_resume(struct device *dev) struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; struct sdio_func *func = container_of(dev, struct sdio_func, dev); int ret = 0; + bool cap_power_off = !!(func->card->host->caps & MMC_CAP_POWER_OFF_CARD);
brcmf_dbg(SDIO, "Enter: F%d\n", func->num); if (func->num != 2) return 0;
- if (!sdiodev->wowl_enabled) { + if (!sdiodev->wowl_enabled && cap_power_off) { /* bus was powered off and device removed, probe again */ ret = brcmf_sdiod_probe(sdiodev); if (ret) brcmf_err("Failed to probe device on resume\n"); } else { - if (sdiodev->settings->bus.sdio.oob_irq_supported) + if (sdiodev->wowl_enabled && sdiodev->settings->bus.sdio.oob_irq_supported) disable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
brcmf_sdiod_freezer_off(sdiodev);