5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal dlemoal@kernel.org
commit 14db5f64a971fce3d8ea35de4dfc7f443a3efb92 upstream.
Write error handling is racy and can sometime lead to the error recovery path wrongly changing the inode size of a sequential zone file to an incorrect value which results in garbage data being readable at the end of a file. There are 2 problems:
1) zonefs_file_dio_write() updates a zone file write pointer offset after issuing a direct IO with iomap_dio_rw(). This update is done only if the IO succeed for synchronous direct writes. However, for asynchronous direct writes, the update is done without waiting for the IO completion so that the next asynchronous IO can be immediately issued. However, if an asynchronous IO completes with a failure right before the i_truncate_mutex lock protecting the update, the update may change the value of the inode write pointer offset that was corrected by the error path (zonefs_io_error() function).
2) zonefs_io_error() is called when a read or write error occurs. This function executes a report zone operation using the callback function zonefs_io_error_cb(), which does all the error recovery handling based on the current zone condition, write pointer position and according to the mount options being used. However, depending on the zoned device being used, a report zone callback may be executed in a context that is different from the context of __zonefs_io_error(). As a result, zonefs_io_error_cb() may be executed without the inode truncate mutex lock held, which can lead to invalid error processing.
Fix both problems as follows: - Problem 1: Perform the inode write pointer offset update before a direct write is issued with iomap_dio_rw(). This is safe to do as partial direct writes are not supported (IOMAP_DIO_PARTIAL is not set) and any failed IO will trigger the execution of zonefs_io_error() which will correct the inode write pointer offset to reflect the current state of the one on the device. - Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error() and call this function directly from __zonefs_io_error() after obtaining the zone information using blkdev_report_zones() with a simple callback function that copies to a local stack variable the struct blk_zone obtained from the device. This ensures that error handling is performed holding the inode truncate mutex. This change also simplifies error handling for conventional zone files by bypassing the execution of report zones entirely. This is safe to do because the condition of conventional zones cannot be read-only or offline and conventional zone files are always fully mapped with a constant file size.
Reported-by: Shin'ichiro Kawasaki shinichiro.kawasaki@wdc.com Fixes: 8dcc1a9d90c1 ("fs: New zonefs file system") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Tested-by: Shin'ichiro Kawasaki shinichiro.kawasaki@wdc.com Reviewed-by: Johannes Thumshirn johannes.thumshirn@wdc.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/zonefs/super.c | 70 ++++++++++++++++++++++++++++++------------------------ 1 file changed, 40 insertions(+), 30 deletions(-)
--- a/fs/zonefs/super.c +++ b/fs/zonefs/super.c @@ -319,16 +319,18 @@ static loff_t zonefs_check_zone_conditio } }
-struct zonefs_ioerr_data { - struct inode *inode; - bool write; -}; - static int zonefs_io_error_cb(struct blk_zone *zone, unsigned int idx, void *data) { - struct zonefs_ioerr_data *err = data; - struct inode *inode = err->inode; + struct blk_zone *z = data; + + *z = *zone; + return 0; +} + +static void zonefs_handle_io_error(struct inode *inode, struct blk_zone *zone, + bool write) +{ struct zonefs_inode_info *zi = ZONEFS_I(inode); struct super_block *sb = inode->i_sb; struct zonefs_sb_info *sbi = ZONEFS_SB(sb); @@ -344,8 +346,8 @@ static int zonefs_io_error_cb(struct blk isize = i_size_read(inode); if (zone->cond != BLK_ZONE_COND_OFFLINE && zone->cond != BLK_ZONE_COND_READONLY && - !err->write && isize == data_size) - return 0; + !write && isize == data_size) + return;
/* * At this point, we detected either a bad zone or an inconsistency @@ -366,8 +368,9 @@ static int zonefs_io_error_cb(struct blk * In all cases, warn about inode size inconsistency and handle the * IO error according to the zone condition and to the mount options. */ - if (zi->i_ztype == ZONEFS_ZTYPE_SEQ && isize != data_size) - zonefs_warn(sb, "inode %lu: invalid size %lld (should be %lld)\n", + if (isize != data_size) + zonefs_warn(sb, + "inode %lu: invalid size %lld (should be %lld)\n", inode->i_ino, isize, data_size);
/* @@ -427,8 +430,6 @@ static int zonefs_io_error_cb(struct blk zonefs_update_stats(inode, data_size); zonefs_i_size_write(inode, data_size); zi->i_wpoffset = data_size; - - return 0; }
/* @@ -442,23 +443,25 @@ static void __zonefs_io_error(struct ino { struct zonefs_inode_info *zi = ZONEFS_I(inode); struct super_block *sb = inode->i_sb; - struct zonefs_sb_info *sbi = ZONEFS_SB(sb); unsigned int noio_flag; - unsigned int nr_zones = 1; - struct zonefs_ioerr_data err = { - .inode = inode, - .write = write, - }; + struct blk_zone zone; int ret;
/* - * The only files that have more than one zone are conventional zone - * files with aggregated conventional zones, for which the inode zone - * size is always larger than the device zone size. - */ - if (zi->i_zone_size > bdev_zone_sectors(sb->s_bdev)) - nr_zones = zi->i_zone_size >> - (sbi->s_zone_sectors_shift + SECTOR_SHIFT); + * Conventional zone have no write pointer and cannot become read-only + * or offline. So simply fake a report for a single or aggregated zone + * and let zonefs_handle_io_error() correct the zone inode information + * according to the mount options. + */ + if (zi->i_ztype != ZONEFS_ZTYPE_SEQ) { + zone.start = zi->i_zsector; + zone.len = zi->i_max_size >> SECTOR_SHIFT; + zone.wp = zone.start + zone.len; + zone.type = BLK_ZONE_TYPE_CONVENTIONAL; + zone.cond = BLK_ZONE_COND_NOT_WP; + zone.capacity = zone.len; + goto handle_io_error; + }
/* * Memory allocations in blkdev_report_zones() can trigger a memory @@ -469,12 +472,19 @@ static void __zonefs_io_error(struct ino * the GFP_NOIO context avoids both problems. */ noio_flag = memalloc_noio_save(); - ret = blkdev_report_zones(sb->s_bdev, zi->i_zsector, nr_zones, - zonefs_io_error_cb, &err); - if (ret != nr_zones) + ret = blkdev_report_zones(sb->s_bdev, zi->i_zsector, 1, + zonefs_io_error_cb, &zone); + memalloc_noio_restore(noio_flag); + if (ret != 1) { zonefs_err(sb, "Get inode %lu zone information failed %d\n", inode->i_ino, ret); - memalloc_noio_restore(noio_flag); + zonefs_warn(sb, "remounting filesystem read-only\n"); + sb->s_flags |= SB_RDONLY; + return; + } + +handle_io_error: + zonefs_handle_io_error(inode, &zone, write); }
static void zonefs_io_error(struct inode *inode, bool write)