From: Alessandro Grassi alessandro.grassi@mailbox.org
[ Upstream commit fb98bd0a13de2c9d96cb5c00c81b5ca118ac9d71 ]
The SPI interface is activated before the CPOL setting is applied. In that moment, the clock idles high and CS goes low. After a short delay, CPOL and other settings are applied, which may cause the clock to change state and idle low. This transition is not part of a clock cycle, and it can confuse the receiving device.
To prevent this unexpected transition, activate the interface while CPOL and the other settings are being applied.
Signed-off-by: Alessandro Grassi alessandro.grassi@mailbox.org Link: https://patch.msgid.link/20250502095520.13825-1-alessandro.grassi@mailbox.or... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-sun4i.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index 2ee6755b43f54..3019f57e65841 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -264,6 +264,9 @@ static int sun4i_spi_transfer_one(struct spi_controller *host, else reg |= SUN4I_CTL_DHB;
+ /* Now that the settings are correct, enable the interface */ + reg |= SUN4I_CTL_ENABLE; + sun4i_spi_write(sspi, SUN4I_CTL_REG, reg);
/* Ensure that we have a parent clock fast enough */ @@ -404,7 +407,7 @@ static int sun4i_spi_runtime_resume(struct device *dev) }
sun4i_spi_write(sspi, SUN4I_CTL_REG, - SUN4I_CTL_ENABLE | SUN4I_CTL_MASTER | SUN4I_CTL_TP); + SUN4I_CTL_MASTER | SUN4I_CTL_TP);
return 0;