From: Vladimir Oltean vladimir.oltean@nxp.com
[ Upstream commit 0181f6f19c6c35b24f1516d8db22f3bbce762633 ]
The ocelot switch driver used to ignore ports which do not have a phy-handle property and not probe those, but this is not quite ok since it is valid to not have a phy-handle property if there is a fixed-link.
It seems that checking for a phy-handle was a proxy for the proper check which is for the status, but that doesn't make a lot of sense, since the ocelot driver already iterates using for_each_available_child_of_node which skips the disabled ports, so I have no idea.
Anyway, a widespread pattern in device trees is for a SoC dtsi to disable by default all hardware, and let board dts files enable what is used. So let's do that and enable only the ports with a phy-handle in the pcb120 and pcb123 device tree files.
Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/boot/dts/mscc/ocelot.dtsi | 11 +++++++++++ arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 8 ++++++++ arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 4 ++++ 3 files changed, 23 insertions(+)
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi index 535a98284dcb..e51db651af13 100644 --- a/arch/mips/boot/dts/mscc/ocelot.dtsi +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -150,36 +150,47 @@ ethernet-ports {
port0: port@0 { reg = <0>; + status = "disabled"; }; port1: port@1 { reg = <1>; + status = "disabled"; }; port2: port@2 { reg = <2>; + status = "disabled"; }; port3: port@3 { reg = <3>; + status = "disabled"; }; port4: port@4 { reg = <4>; + status = "disabled"; }; port5: port@5 { reg = <5>; + status = "disabled"; }; port6: port@6 { reg = <6>; + status = "disabled"; }; port7: port@7 { reg = <7>; + status = "disabled"; }; port8: port@8 { reg = <8>; + status = "disabled"; }; port9: port@9 { reg = <9>; + status = "disabled"; }; port10: port@10 { reg = <10>; + status = "disabled"; }; }; }; diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts index 897de5025d7f..d2dc6b3d923c 100644 --- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts +++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts @@ -69,40 +69,48 @@ phy4: ethernet-phy@3 { };
&port0 { + status = "okay"; phy-handle = <&phy0>; };
&port1 { + status = "okay"; phy-handle = <&phy1>; };
&port2 { + status = "okay"; phy-handle = <&phy2>; };
&port3 { + status = "okay"; phy-handle = <&phy3>; };
&port4 { + status = "okay"; phy-handle = <&phy7>; phy-mode = "sgmii"; phys = <&serdes 4 SERDES1G(2)>; };
&port5 { + status = "okay"; phy-handle = <&phy4>; phy-mode = "sgmii"; phys = <&serdes 5 SERDES1G(5)>; };
&port6 { + status = "okay"; phy-handle = <&phy6>; phy-mode = "sgmii"; phys = <&serdes 6 SERDES1G(3)>; };
&port9 { + status = "okay"; phy-handle = <&phy5>; phy-mode = "sgmii"; phys = <&serdes 9 SERDES1G(4)>; diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts index ef852f382da8..7d7e638791dd 100644 --- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts +++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts @@ -47,17 +47,21 @@ &mdio0 { };
&port0 { + status = "okay"; phy-handle = <&phy0>; };
&port1 { + status = "okay"; phy-handle = <&phy1>; };
&port2 { + status = "okay"; phy-handle = <&phy2>; };
&port3 { + status = "okay"; phy-handle = <&phy3>; };