From: Erik Ekman erik@kryo.se
[ Upstream commit c62041c5baa9ded3bc6fd38d3f724de70683b489 ]
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed.
The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter.
The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.)
Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules."
Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before:
$ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes
After:
$ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes
Signed-off-by: Erik Ekman erik@kryo.se Acked-by: Martin Habets habetsm.xilinx@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/mcdi_port_common.c | 37 +++++++++++++++------ 1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/sfc/mcdi_port_common.c b/drivers/net/ethernet/sfc/mcdi_port_common.c index 4bd3ef8f3384..c4fe3c48ac46 100644 --- a/drivers/net/ethernet/sfc/mcdi_port_common.c +++ b/drivers/net/ethernet/sfc/mcdi_port_common.c @@ -132,16 +132,27 @@ void mcdi_to_ethtool_linkset(u32 media, u32 cap, unsigned long *linkset) case MC_CMD_MEDIA_SFP_PLUS: case MC_CMD_MEDIA_QSFP_PLUS: SET_BIT(FIBRE); - if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) + if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) { SET_BIT(1000baseT_Full); - if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) - SET_BIT(10000baseT_Full); - if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) + SET_BIT(1000baseX_Full); + } + if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) { + SET_BIT(10000baseCR_Full); + SET_BIT(10000baseLR_Full); + SET_BIT(10000baseSR_Full); + } + if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) { SET_BIT(40000baseCR4_Full); - if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN)) + SET_BIT(40000baseSR4_Full); + } + if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN)) { SET_BIT(100000baseCR4_Full); - if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN)) + SET_BIT(100000baseSR4_Full); + } + if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN)) { SET_BIT(25000baseCR_Full); + SET_BIT(25000baseSR_Full); + } if (cap & (1 << MC_CMD_PHY_CAP_50000FDX_LBN)) SET_BIT(50000baseCR2_Full); break; @@ -192,15 +203,19 @@ u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset) result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN); if (TEST_BIT(1000baseT_Half)) result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN); - if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full)) + if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full) || + TEST_BIT(1000baseX_Full)) result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN); - if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full)) + if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full) || + TEST_BIT(10000baseCR_Full) || TEST_BIT(10000baseLR_Full) || + TEST_BIT(10000baseSR_Full)) result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN); - if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full)) + if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full) || + TEST_BIT(40000baseSR4_Full)) result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN); - if (TEST_BIT(100000baseCR4_Full)) + if (TEST_BIT(100000baseCR4_Full) || TEST_BIT(100000baseSR4_Full)) result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN); - if (TEST_BIT(25000baseCR_Full)) + if (TEST_BIT(25000baseCR_Full) || TEST_BIT(25000baseSR_Full)) result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN); if (TEST_BIT(50000baseCR2_Full)) result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN);