From: "Ren� van Dorst" opensource@vdorst.com
[ Upstream commit a5d75538295b06bc6ade1b9da07b9bee57d1c677 ]
Moving mt7623 logic out off mt7530, is required to make hardware setting consistent after we introduce phylink to mtk driver.
Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Reviewed-by: Sean Wang sean.wang@mediatek.com Tested-by: Sean Wang sean.wang@mediatek.com Signed-off-by: René van Dorst opensource@vdorst.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 24 +++++++++++++++++++++++- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 ++++++++ 2 files changed, 31 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -65,6 +65,17 @@ u32 mtk_r32(struct mtk_eth *eth, unsigne return __raw_readl(eth->base + reg); }
+u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned reg) +{ + u32 val; + + val = mtk_r32(eth, reg); + val &= ~mask; + val |= set; + mtk_w32(eth, val, reg); + return reg; +} + static int mtk_mdio_busy_wait(struct mtk_eth *eth) { unsigned long t_start = jiffies; @@ -193,7 +204,7 @@ static void mtk_mac_config(struct phylin struct mtk_mac *mac = container_of(config, struct mtk_mac, phylink_config); struct mtk_eth *eth = mac->hw; - u32 mcr_cur, mcr_new, sid; + u32 mcr_cur, mcr_new, sid, i; int val, ge_mode, err;
/* MT76x8 has no hardware settings between for the MAC */ @@ -255,6 +266,17 @@ static void mtk_mac_config(struct phylin PHY_INTERFACE_MODE_TRGMII) mtk_gmac0_rgmii_adjust(mac->hw, state->speed); + + /* mt7623_pad_clk_setup */ + for (i = 0 ; i < NUM_TRGMII_CTRL; i++) + mtk_w32(mac->hw, + TD_DM_DRVP(8) | TD_DM_DRVN(8), + TRGMII_TD_ODT(i)); + + /* Assert/release MT7623 RXC reset */ + mtk_m32(mac->hw, 0, RXC_RST | RXC_DQSISEL, + TRGMII_RCK_CTRL); + mtk_m32(mac->hw, RXC_RST, 0, TRGMII_RCK_CTRL); } }
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -350,10 +350,13 @@ #define DQSI0(x) ((x << 0) & GENMASK(6, 0)) #define DQSI1(x) ((x << 8) & GENMASK(14, 8)) #define RXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16)) +#define RXC_RST BIT(31) #define RXC_DQSISEL BIT(30) #define RCK_CTRL_RGMII_1000 (RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16)) #define RCK_CTRL_RGMII_10_100 RXCTL_DMWTLAT(2)
+#define NUM_TRGMII_CTRL 5 + /* TRGMII RXC control register */ #define TRGMII_TCK_CTRL 0x10340 #define TXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16)) @@ -361,6 +364,11 @@ #define TCK_CTRL_RGMII_1000 TXCTL_DMWTLAT(2) #define TCK_CTRL_RGMII_10_100 (TXC_INV | TXCTL_DMWTLAT(2))
+/* TRGMII TX Drive Strength */ +#define TRGMII_TD_ODT(i) (0x10354 + 8 * (i)) +#define TD_DM_DRVP(x) ((x) & 0xf) +#define TD_DM_DRVN(x) (((x) & 0xf) << 4) + /* TRGMII Interface mode register */ #define INTF_MODE 0x10390 #define TRGMII_INTF_DIS BIT(0)