diff --git a/Makefile b/Makefile index 4d0711f54047..75d17e7f799b 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 6 -SUBLEVEL = 0 +SUBLEVEL = 1 EXTRAVERSION = NAME = Kleptomaniac Octopus
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 11ea1aff40db..8c6f8c83dd6f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -401,6 +401,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/ { PCI_VDEVICE(INTEL, 0xa356), board_ahci }, /* Cannon Lake PCH-H RAID */ + { PCI_VDEVICE(INTEL, 0x06d7), board_ahci }, /* Comet Lake-H RAID */ { PCI_VDEVICE(INTEL, 0x0f22), board_ahci_mobile }, /* Bay Trail AHCI */ { PCI_VDEVICE(INTEL, 0x0f23), board_ahci_mobile }, /* Bay Trail AHCI */ { PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */ diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c index 039963a7765b..198ddfb8d2b1 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -511,6 +511,9 @@ static int flexcop_usb_init(struct flexcop_usb *fc_usb) return ret; }
+ if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1) + return -ENODEV; + switch (fc_usb->udev->speed) { case USB_SPEED_LOW: err("cannot handle USB speed because it is too slow."); @@ -544,9 +547,6 @@ static int flexcop_usb_probe(struct usb_interface *intf, struct flexcop_device *fc = NULL; int ret;
- if (intf->cur_altsetting->desc.bNumEndpoints < 1) - return -ENODEV; - if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) { err("out of memory\n"); return -ENOMEM; diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index e53c58ab6488..ef62dd6c5ae4 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -818,7 +818,7 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
- if (intf->altsetting[0].desc.bNumEndpoints < rc_ep + 1) + if (intf->cur_altsetting->desc.bNumEndpoints < rc_ep + 1) return -ENODEV;
purb = usb_alloc_urb(0, GFP_KERNEL); @@ -838,7 +838,7 @@ int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf) * Some devices like the Hauppauge NovaTD model 52009 use an interrupt * endpoint, while others use a bulk one. */ - e = &intf->altsetting[0].endpoint[rc_ep].desc; + e = &intf->cur_altsetting->endpoint[rc_ep].desc; if (usb_endpoint_dir_in(e)) { if (usb_endpoint_xfer_bulk(e)) { pipe = usb_rcvbulkpipe(d->udev, rc_ep); diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c index f417dfc0b872..0afe70a3f9a2 100644 --- a/drivers/media/usb/gspca/ov519.c +++ b/drivers/media/usb/gspca/ov519.c @@ -3477,6 +3477,11 @@ static void ov511_mode_init_regs(struct sd *sd) return; }
+ if (alt->desc.bNumEndpoints < 1) { + sd->gspca_dev.usb_err = -ENODEV; + return; + } + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); reg_w(sd, R51x_FIFO_PSIZE, packet_size >> 5);
@@ -3603,6 +3608,11 @@ static void ov518_mode_init_regs(struct sd *sd) return; }
+ if (alt->desc.bNumEndpoints < 1) { + sd->gspca_dev.usb_err = -ENODEV; + return; + } + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx.c b/drivers/media/usb/gspca/stv06xx/stv06xx.c index 79653d409951..95673fc0a99c 100644 --- a/drivers/media/usb/gspca/stv06xx/stv06xx.c +++ b/drivers/media/usb/gspca/stv06xx/stv06xx.c @@ -282,6 +282,9 @@ static int stv06xx_start(struct gspca_dev *gspca_dev) return -EIO; }
+ if (alt->desc.bNumEndpoints < 1) + return -ENODEV; + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size); if (err < 0) @@ -306,11 +309,21 @@ static int stv06xx_start(struct gspca_dev *gspca_dev)
static int stv06xx_isoc_init(struct gspca_dev *gspca_dev) { + struct usb_interface_cache *intfc; struct usb_host_interface *alt; struct sd *sd = (struct sd *) gspca_dev;
+ intfc = gspca_dev->dev->actconfig->intf_cache[0]; + + if (intfc->num_altsetting < 2) + return -ENODEV; + + alt = &intfc->altsetting[1]; + + if (alt->desc.bNumEndpoints < 1) + return -ENODEV; + /* Start isoc bandwidth "negotiation" at max isoc bandwidth */ - alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1]; alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
@@ -323,6 +336,10 @@ static int stv06xx_isoc_nego(struct gspca_dev *gspca_dev) struct usb_host_interface *alt; struct sd *sd = (struct sd *) gspca_dev;
+ /* + * Existence of altsetting and endpoint was verified in + * stv06xx_isoc_init() + */ alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1]; packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode]; diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c index 6d1007715ff7..ae382b3b5f7f 100644 --- a/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c +++ b/drivers/media/usb/gspca/stv06xx/stv06xx_pb0100.c @@ -185,6 +185,10 @@ static int pb0100_start(struct sd *sd) alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); if (!alt) return -ENODEV; + + if (alt->desc.bNumEndpoints < 1) + return -ENODEV; + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
/* If we don't have enough bandwidth use a lower framerate */ diff --git a/drivers/media/usb/gspca/xirlink_cit.c b/drivers/media/usb/gspca/xirlink_cit.c index 934a90bd78c2..c579b100f066 100644 --- a/drivers/media/usb/gspca/xirlink_cit.c +++ b/drivers/media/usb/gspca/xirlink_cit.c @@ -1442,6 +1442,9 @@ static int cit_get_packet_size(struct gspca_dev *gspca_dev) return -EIO; }
+ if (alt->desc.bNumEndpoints < 1) + return -ENODEV; + return le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); }
@@ -2626,6 +2629,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
static int sd_isoc_init(struct gspca_dev *gspca_dev) { + struct usb_interface_cache *intfc; struct usb_host_interface *alt; int max_packet_size;
@@ -2641,8 +2645,17 @@ static int sd_isoc_init(struct gspca_dev *gspca_dev) break; }
+ intfc = gspca_dev->dev->actconfig->intf_cache[0]; + + if (intfc->num_altsetting < 2) + return -ENODEV; + + alt = &intfc->altsetting[1]; + + if (alt->desc.bNumEndpoints < 1) + return -ENODEV; + /* Start isoc bandwidth "negotiation" at max isoc bandwidth */ - alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1]; alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
return 0; @@ -2665,6 +2678,9 @@ static int sd_isoc_nego(struct gspca_dev *gspca_dev) break; }
+ /* + * Existence of altsetting and endpoint was verified in sd_isoc_init() + */ alt = &gspca_dev->dev->actconfig->intf_cache[0]->altsetting[1]; packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); if (packet_size <= min_packet_size) diff --git a/drivers/media/usb/usbtv/usbtv-core.c b/drivers/media/usb/usbtv/usbtv-core.c index 5095c380b2c1..ee9c656d121f 100644 --- a/drivers/media/usb/usbtv/usbtv-core.c +++ b/drivers/media/usb/usbtv/usbtv-core.c @@ -56,7 +56,7 @@ int usbtv_set_regs(struct usbtv *usbtv, const u16 regs[][2], int size)
ret = usb_control_msg(usbtv->udev, pipe, USBTV_REQUEST_REG, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, index, NULL, 0, 0); + value, index, NULL, 0, USB_CTRL_GET_TIMEOUT); if (ret < 0) return ret; } diff --git a/drivers/media/usb/usbtv/usbtv-video.c b/drivers/media/usb/usbtv/usbtv-video.c index 3d9284a09ee5..b249f037900c 100644 --- a/drivers/media/usb/usbtv/usbtv-video.c +++ b/drivers/media/usb/usbtv/usbtv-video.c @@ -800,7 +800,8 @@ static int usbtv_s_ctrl(struct v4l2_ctrl *ctrl) ret = usb_control_msg(usbtv->udev, usb_rcvctrlpipe(usbtv->udev, 0), USBTV_CONTROL_REG, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, USBTV_BASE + 0x0244, (void *)data, 3, 0); + 0, USBTV_BASE + 0x0244, (void *)data, 3, + USB_CTRL_GET_TIMEOUT); if (ret < 0) goto error; } @@ -851,7 +852,7 @@ static int usbtv_s_ctrl(struct v4l2_ctrl *ctrl) ret = usb_control_msg(usbtv->udev, usb_sndctrlpipe(usbtv->udev, 0), USBTV_CONTROL_REG, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, index, (void *)data, size, 0); + 0, index, (void *)data, size, USB_CTRL_SET_TIMEOUT);
error: if (ret < 0) diff --git a/drivers/media/v4l2-core/v4l2-device.c b/drivers/media/v4l2-core/v4l2-device.c index 63d6b147b21e..41da73ce2e98 100644 --- a/drivers/media/v4l2-core/v4l2-device.c +++ b/drivers/media/v4l2-core/v4l2-device.c @@ -179,6 +179,7 @@ static void v4l2_subdev_release(struct v4l2_subdev *sd)
if (sd->internal_ops && sd->internal_ops->release) sd->internal_ops->release(sd); + sd->devnode = NULL; module_put(owner); }
diff --git a/drivers/staging/kpc2000/kpc2000/core.c b/drivers/staging/kpc2000/kpc2000/core.c index 93cf28febdf6..7b00d7069e21 100644 --- a/drivers/staging/kpc2000/kpc2000/core.c +++ b/drivers/staging/kpc2000/kpc2000/core.c @@ -110,10 +110,10 @@ static ssize_t cpld_reconfigure(struct device *dev, const char *buf, size_t count) { struct kp2000_device *pcard = dev_get_drvdata(dev); - long wr_val; + unsigned long wr_val; int rv;
- rv = kstrtol(buf, 0, &wr_val); + rv = kstrtoul(buf, 0, &wr_val); if (rv < 0) return rv; if (wr_val > 7) diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c index 845c8817281c..f7f09c0d273f 100644 --- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c +++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c @@ -32,6 +32,7 @@ static const struct usb_device_id rtw_usb_id_tbl[] = { /****** 8188EUS ********/ {USB_DEVICE(0x056e, 0x4008)}, /* Elecom WDC-150SU2M */ {USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */ + {USB_DEVICE(0x0B05, 0x18F0)}, /* ASUS USB-N10 Nano B1 */ {USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */ {USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */ {USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */ diff --git a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt index 081d58abd5ac..fca6357e1d45 100644 --- a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt +++ b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt @@ -6,7 +6,7 @@ SPI You have to declare the WFxxx chip in your device tree.
Required properties: - - compatible: Should be "silabs,wfx-spi" + - compatible: Should be "silabs,wf200" - reg: Chip select address of device - spi-max-frequency: Maximum SPI clocking speed of device in Hz - interrupts-extended: Should contain interrupt line (interrupt-parent + @@ -15,6 +15,7 @@ Required properties: Optional properties: - reset-gpios: phandle of gpio that will be used to reset chip during probe. Without this property, you may encounter issues with warm boot. + (Legacy: when compatible == "silabs,wfx-spi", the gpio is inverted.)
Please consult Documentation/devicetree/bindings/spi/spi-bus.txt for optional SPI connection related properties, @@ -23,12 +24,12 @@ Example:
&spi1 { wfx { - compatible = "silabs,wfx-spi"; + compatible = "silabs,wf200"; pinctrl-names = "default"; pinctrl-0 = <&wfx_irq &wfx_gpios>; interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>; wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; reg = <0>; spi-max-frequency = <42000000>; }; diff --git a/drivers/staging/wfx/bus_sdio.c b/drivers/staging/wfx/bus_sdio.c index f8901164c206..5450bd5e1b5d 100644 --- a/drivers/staging/wfx/bus_sdio.c +++ b/drivers/staging/wfx/bus_sdio.c @@ -200,25 +200,23 @@ static int wfx_sdio_probe(struct sdio_func *func, if (ret) goto err0;
- ret = wfx_sdio_irq_subscribe(bus); - if (ret) - goto err1; - bus->core = wfx_init_common(&func->dev, &wfx_sdio_pdata, &wfx_sdio_hwbus_ops, bus); if (!bus->core) { ret = -EIO; - goto err2; + goto err1; }
+ ret = wfx_sdio_irq_subscribe(bus); + if (ret) + goto err1; + ret = wfx_probe(bus->core); if (ret) - goto err3; + goto err2;
return 0;
-err3: - wfx_free_common(bus->core); err2: wfx_sdio_irq_unsubscribe(bus); err1: @@ -234,7 +232,6 @@ static void wfx_sdio_remove(struct sdio_func *func) struct wfx_sdio_priv *bus = sdio_get_drvdata(func);
wfx_release(bus->core); - wfx_free_common(bus->core); wfx_sdio_irq_unsubscribe(bus); sdio_claim_host(func); sdio_disable_func(func); diff --git a/drivers/staging/wfx/bus_spi.c b/drivers/staging/wfx/bus_spi.c index 40bc33035de2..d6a75bd61595 100644 --- a/drivers/staging/wfx/bus_spi.c +++ b/drivers/staging/wfx/bus_spi.c @@ -27,6 +27,8 @@ MODULE_PARM_DESC(gpio_reset, "gpio number for reset. -1 for none."); #define SET_WRITE 0x7FFF /* usage: and operation */ #define SET_READ 0x8000 /* usage: or operation */
+#define WFX_RESET_INVERTED 1 + static const struct wfx_platform_data wfx_spi_pdata = { .file_fw = "wfm_wf200", .file_pds = "wf200.pds", @@ -154,6 +156,11 @@ static void wfx_spi_request_rx(struct work_struct *work) wfx_bh_request_rx(bus->core); }
+static void wfx_flush_irq_work(void *w) +{ + flush_work(w); +} + static size_t wfx_spi_align_size(void *priv, size_t size) { // Most of SPI controllers avoid DMA if buffer size is not 32bit aligned @@ -201,28 +208,31 @@ static int wfx_spi_probe(struct spi_device *func) if (!bus->gpio_reset) { dev_warn(&func->dev, "try to load firmware anyway\n"); } else { - gpiod_set_value(bus->gpio_reset, 0); - udelay(100); + if (spi_get_device_id(func)->driver_data & WFX_RESET_INVERTED) + gpiod_toggle_active_low(bus->gpio_reset); gpiod_set_value(bus->gpio_reset, 1); + udelay(100); + gpiod_set_value(bus->gpio_reset, 0); udelay(2000); }
- ret = devm_request_irq(&func->dev, func->irq, wfx_spi_irq_handler, - IRQF_TRIGGER_RISING, "wfx", bus); - if (ret) - return ret; - INIT_WORK(&bus->request_rx, wfx_spi_request_rx); bus->core = wfx_init_common(&func->dev, &wfx_spi_pdata, &wfx_spi_hwbus_ops, bus); if (!bus->core) return -EIO;
- ret = wfx_probe(bus->core); + ret = devm_add_action_or_reset(&func->dev, wfx_flush_irq_work, + &bus->request_rx); if (ret) - wfx_free_common(bus->core); + return ret;
- return ret; + ret = devm_request_irq(&func->dev, func->irq, wfx_spi_irq_handler, + IRQF_TRIGGER_RISING, "wfx", bus); + if (ret) + return ret; + + return wfx_probe(bus->core); }
static int wfx_spi_remove(struct spi_device *func) @@ -230,11 +240,6 @@ static int wfx_spi_remove(struct spi_device *func) struct wfx_spi_priv *bus = spi_get_drvdata(func);
wfx_release(bus->core); - wfx_free_common(bus->core); - // A few IRQ will be sent during device release. Hopefully, no IRQ - // should happen after wdev/wvif are released. - devm_free_irq(&func->dev, func->irq, bus); - flush_work(&bus->request_rx); return 0; }
@@ -244,14 +249,16 @@ static int wfx_spi_remove(struct spi_device *func) * stripped. */ static const struct spi_device_id wfx_spi_id[] = { - { "wfx-spi", 0 }, + { "wfx-spi", WFX_RESET_INVERTED }, + { "wf200", 0 }, { }, }; MODULE_DEVICE_TABLE(spi, wfx_spi_id);
#ifdef CONFIG_OF static const struct of_device_id wfx_spi_of_match[] = { - { .compatible = "silabs,wfx-spi" }, + { .compatible = "silabs,wfx-spi", .data = (void *)WFX_RESET_INVERTED }, + { .compatible = "silabs,wf200" }, { }, }; MODULE_DEVICE_TABLE(of, wfx_spi_of_match); diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c index 84adad64fc30..76b2ff7fc7fe 100644 --- a/drivers/staging/wfx/main.c +++ b/drivers/staging/wfx/main.c @@ -262,6 +262,16 @@ static int wfx_send_pdata_pds(struct wfx_dev *wdev) return ret; }
+static void wfx_free_common(void *data) +{ + struct wfx_dev *wdev = data; + + mutex_destroy(&wdev->rx_stats_lock); + mutex_destroy(&wdev->conf_mutex); + wfx_tx_queues_deinit(wdev); + ieee80211_free_hw(wdev->hw); +} + struct wfx_dev *wfx_init_common(struct device *dev, const struct wfx_platform_data *pdata, const struct hwbus_ops *hwbus_ops, @@ -332,15 +342,10 @@ struct wfx_dev *wfx_init_common(struct device *dev, wfx_init_hif_cmd(&wdev->hif_cmd); wfx_tx_queues_init(wdev);
- return wdev; -} + if (devm_add_action_or_reset(dev, wfx_free_common, wdev)) + return NULL;
-void wfx_free_common(struct wfx_dev *wdev) -{ - mutex_destroy(&wdev->rx_stats_lock); - mutex_destroy(&wdev->conf_mutex); - wfx_tx_queues_deinit(wdev); - ieee80211_free_hw(wdev->hw); + return wdev; }
int wfx_probe(struct wfx_dev *wdev) diff --git a/drivers/staging/wfx/main.h b/drivers/staging/wfx/main.h index 875f8c227803..9c9410072def 100644 --- a/drivers/staging/wfx/main.h +++ b/drivers/staging/wfx/main.h @@ -34,7 +34,6 @@ struct wfx_dev *wfx_init_common(struct device *dev, const struct wfx_platform_data *pdata, const struct hwbus_ops *hwbus_ops, void *hwbus_priv); -void wfx_free_common(struct wfx_dev *wdev);
int wfx_probe(struct wfx_dev *wdev); void wfx_release(struct wfx_dev *wdev); diff --git a/drivers/staging/wfx/queue.c b/drivers/staging/wfx/queue.c index 0bcc61feee1d..51d6c55ae91f 100644 --- a/drivers/staging/wfx/queue.c +++ b/drivers/staging/wfx/queue.c @@ -130,12 +130,12 @@ static void wfx_tx_queue_clear(struct wfx_dev *wdev, struct wfx_queue *queue, spin_lock_bh(&queue->queue.lock); while ((item = __skb_dequeue(&queue->queue)) != NULL) skb_queue_head(gc_list, item); - spin_lock_bh(&stats->pending.lock); + spin_lock_nested(&stats->pending.lock, 1); for (i = 0; i < ARRAY_SIZE(stats->link_map_cache); ++i) { stats->link_map_cache[i] -= queue->link_map_cache[i]; queue->link_map_cache[i] = 0; } - spin_unlock_bh(&stats->pending.lock); + spin_unlock(&stats->pending.lock); spin_unlock_bh(&queue->queue.lock); }
@@ -207,9 +207,9 @@ void wfx_tx_queue_put(struct wfx_dev *wdev, struct wfx_queue *queue,
++queue->link_map_cache[tx_priv->link_id];
- spin_lock_bh(&stats->pending.lock); + spin_lock_nested(&stats->pending.lock, 1); ++stats->link_map_cache[tx_priv->link_id]; - spin_unlock_bh(&stats->pending.lock); + spin_unlock(&stats->pending.lock); spin_unlock_bh(&queue->queue.lock); }
@@ -237,11 +237,11 @@ static struct sk_buff *wfx_tx_queue_get(struct wfx_dev *wdev, __skb_unlink(skb, &queue->queue); --queue->link_map_cache[tx_priv->link_id];
- spin_lock_bh(&stats->pending.lock); + spin_lock_nested(&stats->pending.lock, 1); __skb_queue_tail(&stats->pending, skb); if (!--stats->link_map_cache[tx_priv->link_id]) wakeup_stats = true; - spin_unlock_bh(&stats->pending.lock); + spin_unlock(&stats->pending.lock); } spin_unlock_bh(&queue->queue.lock); if (wakeup_stats) @@ -259,10 +259,10 @@ int wfx_pending_requeue(struct wfx_dev *wdev, struct sk_buff *skb) spin_lock_bh(&queue->queue.lock); ++queue->link_map_cache[tx_priv->link_id];
- spin_lock_bh(&stats->pending.lock); + spin_lock_nested(&stats->pending.lock, 1); ++stats->link_map_cache[tx_priv->link_id]; __skb_unlink(skb, &stats->pending); - spin_unlock_bh(&stats->pending.lock); + spin_unlock(&stats->pending.lock); __skb_queue_tail(&queue->queue, skb); spin_unlock_bh(&queue->queue.lock); return 0; diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c index b71756ab0394..7fe64fcd385d 100644 --- a/drivers/staging/wlan-ng/hfa384x_usb.c +++ b/drivers/staging/wlan-ng/hfa384x_usb.c @@ -3372,6 +3372,8 @@ static void hfa384x_int_rxmonitor(struct wlandevice *wlandev, WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)) { pr_debug("overlen frm: len=%zd\n", skblen - sizeof(struct p80211_caphdr)); + + return; }
skb = dev_alloc_skb(skblen); diff --git a/drivers/staging/wlan-ng/prism2usb.c b/drivers/staging/wlan-ng/prism2usb.c index 352556f6870a..4689b2170e4f 100644 --- a/drivers/staging/wlan-ng/prism2usb.c +++ b/drivers/staging/wlan-ng/prism2usb.c @@ -180,6 +180,7 @@ static void prism2sta_disconnect_usb(struct usb_interface *interface)
cancel_work_sync(&hw->link_bh); cancel_work_sync(&hw->commsqual_bh); + cancel_work_sync(&hw->usb_work);
/* Now we complete any outstanding commands * and tell everyone who is waiting for their diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 47f09a6ce7bd..84d6f7df09a4 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -923,16 +923,16 @@ static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
mutex_lock(&acm->port.mutex);
- if ((ss->close_delay != old_close_delay) || - (ss->closing_wait != old_closing_wait)) { - if (!capable(CAP_SYS_ADMIN)) + if (!capable(CAP_SYS_ADMIN)) { + if ((ss->close_delay != old_close_delay) || + (ss->closing_wait != old_closing_wait)) retval = -EPERM; - else { - acm->port.close_delay = close_delay; - acm->port.closing_wait = closing_wait; - } - } else - retval = -EOPNOTSUPP; + else + retval = -EOPNOTSUPP; + } else { + acm->port.close_delay = close_delay; + acm->port.closing_wait = closing_wait; + }
mutex_unlock(&acm->port.mutex); return retval; diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 886c9b602f8c..5267ad2989ee 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1436,10 +1436,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) * We need to map sg if the transfer_buffer is * NULL. */ - if (!urb->transfer_buffer) - qh->use_sg = true; - - if (qh->use_sg) { + if (!urb->transfer_buffer) { /* sg_miter_start is already done in musb_ep_program */ if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); @@ -1447,9 +1444,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) status = -EINVAL; goto done; } - urb->transfer_buffer = qh->sg_miter.addr; length = min_t(u32, length, qh->sg_miter.length); - musb_write_fifo(hw_ep, length, urb->transfer_buffer); + musb_write_fifo(hw_ep, length, qh->sg_miter.addr); qh->sg_miter.consumed = length; sg_miter_stop(&qh->sg_miter); } else { @@ -1458,11 +1454,6 @@ void musb_host_tx(struct musb *musb, u8 epnum)
qh->segsize = length;
- if (qh->use_sg) { - if (offset + length >= urb->transfer_buffer_length) - qh->use_sg = false; - } - musb_ep_select(mbase, epnum); musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); @@ -1977,8 +1968,10 @@ void musb_host_rx(struct musb *musb, u8 epnum) urb->actual_length += xfer_len; qh->offset += xfer_len; if (done) { - if (qh->use_sg) + if (qh->use_sg) { qh->use_sg = false; + urb->transfer_buffer = NULL; + }
if (urb->status == -EINPROGRESS) urb->status = status; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 5737add6a2a4..4cca0b836f43 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -710,7 +710,7 @@ static void edge_interrupt_callback(struct urb *urb) /* grab the txcredits for the ports if available */ position = 2; portNumber = 0; - while ((position < length) && + while ((position < length - 1) && (portNumber < edge_serial->serial->num_ports)) { txCredits = data[position] | (data[position+1] << 8); if (txCredits) { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0b5dcf973d94..8bfffca3e4ae 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1992,8 +1992,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ + { USB_DEVICE_INTERFACE_CLASS(0x1435, 0xd191, 0xff), /* Wistron Neweb D19Q1 */ + .driver_info = RSVD(1) | RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x1690, 0x7588, 0xff), /* ASKEY WWHC050 */ + .driver_info = RSVD(1) | RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */ .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2033, 0xff), /* BroadMobi BM806U */ + .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff), /* BroadMobi BM818 */ .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ diff --git a/fs/libfs.c b/fs/libfs.c index c686bd9caac6..3759fbacf522 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -891,7 +891,7 @@ int simple_attr_open(struct inode *inode, struct file *file, { struct simple_attr *attr;
- attr = kmalloc(sizeof(*attr), GFP_KERNEL); + attr = kzalloc(sizeof(*attr), GFP_KERNEL); if (!attr) return -ENOMEM;
@@ -931,9 +931,11 @@ ssize_t simple_attr_read(struct file *file, char __user *buf, if (ret) return ret;
- if (*ppos) { /* continued read */ + if (*ppos && attr->get_buf[0]) { + /* continued read */ size = strlen(attr->get_buf); - } else { /* first read */ + } else { + /* first read */ u64 val; ret = attr->get(attr->data, &val); if (ret) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 1cc945daa9c8..5080469094af 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1034,17 +1034,6 @@ static void __reg_bound_offset(struct bpf_reg_state *reg) reg->umax_value)); }
-static void __reg_bound_offset32(struct bpf_reg_state *reg) -{ - u64 mask = 0xffffFFFF; - struct tnum range = tnum_range(reg->umin_value & mask, - reg->umax_value & mask); - struct tnum lo32 = tnum_cast(reg->var_off, 4); - struct tnum hi32 = tnum_lshift(tnum_rshift(reg->var_off, 32), 32); - - reg->var_off = tnum_or(hi32, tnum_intersect(lo32, range)); -} - /* Reset the min/max bounds of a register */ static void __mark_reg_unbounded(struct bpf_reg_state *reg) { @@ -5717,10 +5706,6 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg, /* We might have learned some bits from the bounds. */ __reg_bound_offset(false_reg); __reg_bound_offset(true_reg); - if (is_jmp32) { - __reg_bound_offset32(false_reg); - __reg_bound_offset32(true_reg); - } /* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax. @@ -5830,10 +5815,6 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg, /* We might have learned some bits from the bounds. */ __reg_bound_offset(false_reg); __reg_bound_offset(true_reg); - if (is_jmp32) { - __reg_bound_offset32(false_reg); - __reg_bound_offset32(true_reg); - } /* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax.