From: Bitterblue Smith rtl8821cerfe2@gmail.com
[ Upstream commit 41a7acb7dde8395f52a707bbba7712a898dfafb0 ]
RTL8822CU, RTL8822BU, and RTL8821CU need an extra register write after reading and writing certain addresses.
Without this, the firmware upload fails approximately more than 50% of the time.
Tested with RTL8811CU (Tenda U9 V2.0) which is the same as RTL8821CU but without Bluetooth.
Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support") Signed-off-by: Bitterblue Smith rtl8821cerfe2@gmail.com Acked-by: Ping-Ke Shih pkshih@realtek.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://msgid.link/f12ed39d-28e8-4b8b-8d22-447bcf295afc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtw88/usb.c | 40 ++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/usb.c b/drivers/net/wireless/realtek/rtw88/usb.c index e6ab1ac6d7093..a0188511099a1 100644 --- a/drivers/net/wireless/realtek/rtw88/usb.c +++ b/drivers/net/wireless/realtek/rtw88/usb.c @@ -33,6 +33,36 @@ static void rtw_usb_fill_tx_checksum(struct rtw_usb *rtwusb, rtw_tx_fill_txdesc_checksum(rtwdev, &pkt_info, skb->data); }
+static void rtw_usb_reg_sec(struct rtw_dev *rtwdev, u32 addr, __le32 *data) +{ + struct rtw_usb *rtwusb = rtw_get_usb_priv(rtwdev); + struct usb_device *udev = rtwusb->udev; + bool reg_on_section = false; + u16 t_reg = 0x4e0; + u8 t_len = 1; + int status; + + /* There are three sections: + * 1. on (0x00~0xFF; 0x1000~0x10FF): this section is always powered on + * 2. off (< 0xFE00, excluding "on" section): this section could be + * powered off + * 3. local (>= 0xFE00): usb specific registers section + */ + if (addr <= 0xff || (addr >= 0x1000 && addr <= 0x10ff)) + reg_on_section = true; + + if (!reg_on_section) + return; + + status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + RTW_USB_CMD_REQ, RTW_USB_CMD_WRITE, + t_reg, 0, data, t_len, 500); + + if (status != t_len && status != -ENODEV) + rtw_err(rtwdev, "%s: reg 0x%x, usb write %u fail, status: %d\n", + __func__, t_reg, t_len, status); +} + static u32 rtw_usb_read(struct rtw_dev *rtwdev, u32 addr, u16 len) { struct rtw_usb *rtwusb = rtw_get_usb_priv(rtwdev); @@ -58,6 +88,11 @@ static u32 rtw_usb_read(struct rtw_dev *rtwdev, u32 addr, u16 len) rtw_err(rtwdev, "read register 0x%x failed with %d\n", addr, ret);
+ if (rtwdev->chip->id == RTW_CHIP_TYPE_8822C || + rtwdev->chip->id == RTW_CHIP_TYPE_8822B || + rtwdev->chip->id == RTW_CHIP_TYPE_8821C) + rtw_usb_reg_sec(rtwdev, addr, data); + return le32_to_cpu(*data); }
@@ -102,6 +137,11 @@ static void rtw_usb_write(struct rtw_dev *rtwdev, u32 addr, u32 val, int len) if (ret < 0 && ret != -ENODEV && count++ < 4) rtw_err(rtwdev, "write register 0x%x failed with %d\n", addr, ret); + + if (rtwdev->chip->id == RTW_CHIP_TYPE_8822C || + rtwdev->chip->id == RTW_CHIP_TYPE_8822B || + rtwdev->chip->id == RTW_CHIP_TYPE_8821C) + rtw_usb_reg_sec(rtwdev, addr, data); }
static void rtw_usb_write8(struct rtw_dev *rtwdev, u32 addr, u8 val)