From: Sudarsana Reddy Kalluru sudarsana.kalluru@cavium.com
[ Upstream commit 04f05230c5c13b1384f66f5186a68d7499e34622 ]
Vlans are not getting removed when drivers are unloaded. The recent storm firmware versions had added safeguards against re-configuring an already configured vlan. As a result, PF inner reload flows (e.g., mtu change) might trigger an assertion. This change is going to remove vlans (same as we do for MACs) when doing a chip cleanup during unload.
Signed-off-by: Sudarsana Reddy Kalluru Sudarsana.Kalluru@cavium.com Signed-off-by: Ariel Elior ariel.elior@cavium.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 34 +++++++++++++++---- .../net/ethernet/broadcom/bnx2x/bnx2x_sp.h | 4 ++- 2 files changed, 30 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 77f53e4122c3..4c412c52bcde 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -8462,6 +8462,7 @@ int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan, /* Fill a user request section if needed */ if (!test_bit(RAMROD_CONT, ramrod_flags)) { ramrod_param.user_req.u.vlan.vlan = vlan; + __set_bit(BNX2X_VLAN, &ramrod_param.user_req.vlan_mac_flags); /* Set the command: ADD or DEL */ if (set) ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; @@ -8482,6 +8483,27 @@ int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan, return rc; }
+static int bnx2x_del_all_vlans(struct bnx2x *bp) +{ + struct bnx2x_vlan_mac_obj *vlan_obj = &bp->sp_objs[0].vlan_obj; + unsigned long ramrod_flags = 0, vlan_flags = 0; + struct bnx2x_vlan_entry *vlan; + int rc; + + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + __set_bit(BNX2X_VLAN, &vlan_flags); + rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_flags, &ramrod_flags); + if (rc) + return rc; + + /* Mark that hw forgot all entries */ + list_for_each_entry(vlan, &bp->vlan_reg, link) + vlan->hw = false; + bp->vlan_cnt = 0; + + return 0; +} + int bnx2x_del_all_macs(struct bnx2x *bp, struct bnx2x_vlan_mac_obj *mac_obj, int mac_type, bool wait_for_comp) @@ -9320,6 +9342,11 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link) BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n", rc);
+ /* Remove all currently configured VLANs */ + rc = bnx2x_del_all_vlans(bp); + if (rc < 0) + BNX2X_ERR("Failed to delete all VLANs\n"); + /* Disable LLH */ if (!CHIP_IS_E1(bp)) REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0); @@ -13007,13 +13034,6 @@ static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode)
int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp) { - struct bnx2x_vlan_entry *vlan; - - /* The hw forgot all entries after reload */ - list_for_each_entry(vlan, &bp->vlan_reg, link) - vlan->hw = false; - bp->vlan_cnt = 0; - /* Don't set rx mode here. Our caller will do it. */ bnx2x_vlan_configure(bp, false);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h index 0bf2fd470819..7a6e82db4231 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -265,6 +265,7 @@ enum { BNX2X_ETH_MAC, BNX2X_ISCSI_ETH_MAC, BNX2X_NETQ_ETH_MAC, + BNX2X_VLAN, BNX2X_DONT_CONSUME_CAM_CREDIT, BNX2X_DONT_CONSUME_CAM_CREDIT_DEST, }; @@ -272,7 +273,8 @@ enum { #define BNX2X_VLAN_MAC_CMP_MASK (1 << BNX2X_UC_LIST_MAC | \ 1 << BNX2X_ETH_MAC | \ 1 << BNX2X_ISCSI_ETH_MAC | \ - 1 << BNX2X_NETQ_ETH_MAC) + 1 << BNX2X_NETQ_ETH_MAC | \ + 1 << BNX2X_VLAN) #define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \ ((flags) & BNX2X_VLAN_MAC_CMP_MASK)