From: Yu Chen chenyu56@huawei.com
[ Upstream commit 1c0e69ae1b9f9004fd72978612ae3463791edc56 ]
If the SS PHY is in P3, there is no pipe_clk, HW may use suspend_clk for function, as suspend_clk is slow so EP command need more time to complete, e.g, imx8M suspend_clk is 32K, set ep configuration will take about 380us per below trace time stamp(44.286278 - 44.285897 = 0.000381):
configfs_acm.sh-822 [000] d..1 44.285896: dwc3_writel: addr 000000006d59aae1 value 00000401 configfs_acm.sh-822 [000] d..1 44.285897: dwc3_readl: addr 000000006d59aae1 value 00000401 ... ... configfs_acm.sh-822 [000] d..1 44.286278: dwc3_readl: addr 000000006d59aae1 value 00000001 configfs_acm.sh-822 [000] d..1 44.286279: dwc3_gadget_ep_cmd: ep0out: cmd 'Set Endpoint Configuration' [401] params 00001000 00000500 00000000 --> status: Successful
This was originally found on Hisilicon Kirin Soc that need more time for the device controller to clear the CmdAct of DEPCMD.
Signed-off-by: Yu Chen chenyu56@huawei.com Signed-off-by: John Stultz john.stultz@linaro.org Signed-off-by: Li Jun jun.li@nxp.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 4149d751719e3..4a42368734644 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -276,7 +276,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, { const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; struct dwc3 *dwc = dep->dwc; - u32 timeout = 1000; + u32 timeout = 5000; u32 saved_config = 0; u32 reg;