6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
commit 7bac65687510038390a0a54cbe14fba08d037e46 upstream.
PHY might already be powered on during ufs_qcom_power_up_sequence() in a couple of cases:
1. During UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH quirk
2. Resuming from spm_lvl = 5 suspend
In those cases, it is necessary to call phy_power_off() and phy_exit() in ufs_qcom_power_up_sequence() function to power off the PHY before calling phy_init() and phy_power_on().
Case (1) is doing it via ufs_qcom_reinit_notify() callback, but case (2) is not handled. So to satisfy both cases, call phy_power_off() and phy_exit() if the phy_count is non-zero. And with this change, the reinit_notify() callback is no longer needed.
This fixes the below UFS resume failure with spm_lvl = 5:
ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5 ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume returns -5 ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error -5
Cc: stable@vger.kernel.org # 6.3 Fixes: baf5ddac90dc ("scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device") Reported-by: Ram Kumar Dwivedi quic_rdwivedi@quicinc.com Tested-by: Amit Pundir amit.pundir@linaro.org # on SM8550-HDK Reviewed-by: Bart Van Assche bvanassche@acm.org Tested-by: Neil Armstrong neil.armstrong@linaro.org # on SM8550-QRD Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-1-63c4b95a70b9@li... Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ufs/core/ufshcd-priv.h | 6 ------ drivers/ufs/core/ufshcd.c | 1 - drivers/ufs/host/ufs-qcom.c | 13 +++++-------- include/ufs/ufshcd.h | 2 -- 4 files changed, 5 insertions(+), 17 deletions(-)
--- a/drivers/ufs/core/ufshcd-priv.h +++ b/drivers/ufs/core/ufshcd-priv.h @@ -237,12 +237,6 @@ static inline void ufshcd_vops_config_sc hba->vops->config_scaling_param(hba, p, data); }
-static inline void ufshcd_vops_reinit_notify(struct ufs_hba *hba) -{ - if (hba->vops && hba->vops->reinit_notify) - hba->vops->reinit_notify(hba); -} - static inline int ufshcd_vops_mcq_config_resource(struct ufs_hba *hba) { if (hba->vops && hba->vops->mcq_config_resource) --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -8881,7 +8881,6 @@ static int ufshcd_probe_hba(struct ufs_h ufshcd_device_reset(hba); ufs_put_device_desc(hba); ufshcd_hba_stop(hba); - ufshcd_vops_reinit_notify(hba); ret = ufshcd_hba_enable(hba); if (ret) { dev_err(hba->dev, "Host controller enable failed\n"); --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -368,6 +368,11 @@ static int ufs_qcom_power_up_sequence(st if (ret) return ret;
+ if (phy->power_count) { + phy_power_off(phy); + phy_exit(phy); + } + /* phy initialization - calibrate the phy */ ret = phy_init(phy); if (ret) { @@ -1562,13 +1567,6 @@ static void ufs_qcom_config_scaling_para } #endif
-static void ufs_qcom_reinit_notify(struct ufs_hba *hba) -{ - struct ufs_qcom_host *host = ufshcd_get_variant(hba); - - phy_power_off(host->generic_phy); -} - /* Resources */ static const struct ufshcd_res_info ufs_res_info[RES_MAX] = { {.name = "ufs_mem",}, @@ -1807,7 +1805,6 @@ static const struct ufs_hba_variant_ops .device_reset = ufs_qcom_device_reset, .config_scaling_param = ufs_qcom_config_scaling_param, .program_key = ufs_qcom_ice_program_key, - .reinit_notify = ufs_qcom_reinit_notify, .mcq_config_resource = ufs_qcom_mcq_config_resource, .get_hba_mac = ufs_qcom_get_hba_mac, .op_runtime_config = ufs_qcom_op_runtime_config, --- a/include/ufs/ufshcd.h +++ b/include/ufs/ufshcd.h @@ -329,7 +329,6 @@ struct ufs_pwr_mode_info { * @program_key: program or evict an inline encryption key * @fill_crypto_prdt: initialize crypto-related fields in the PRDT * @event_notify: called to notify important events - * @reinit_notify: called to notify reinit of UFSHCD during max gear switch * @mcq_config_resource: called to configure MCQ platform resources * @get_hba_mac: reports maximum number of outstanding commands supported by * the controller. Should be implemented for UFSHCI 4.0 or later @@ -381,7 +380,6 @@ struct ufs_hba_variant_ops { void *prdt, unsigned int num_segments); void (*event_notify)(struct ufs_hba *hba, enum ufs_event_type evt, void *data); - void (*reinit_notify)(struct ufs_hba *); int (*mcq_config_resource)(struct ufs_hba *hba); int (*get_hba_mac)(struct ufs_hba *hba); int (*op_runtime_config)(struct ufs_hba *hba);