From: Dmitry Baryshkov dmitry.baryshkov@linaro.org
[ Upstream commit 951384cabc5dfb09251d440dbc26058eba86f97e ]
PM8009 has special revision (P=1), which is to be used for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Declare regulators data to be used for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul vkoul@kernel.org Link: https://lore.kernel.org/r/20201231122348.637917-4-dmitry.baryshkov@linaro.or... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/qcom-rpmh-regulator.c | 26 +++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index a22c4b5f64f7e..ba838c4cf2b8b 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -732,6 +732,15 @@ static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = { .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, };
+static const struct rpmh_vreg_hw_data pmic5_hfsmps515_1 = { + .regulator_type = VRM, + .ops = &rpmh_regulator_vrm_ops, + .voltage_range = REGULATOR_LINEAR_RANGE(900000, 0, 4, 16000), + .n_voltages = 5, + .pmic_mode_map = pmic_mode_map_pmic5_smps, + .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, +}; + static const struct rpmh_vreg_hw_data pmic5_bob = { .regulator_type = VRM, .ops = &rpmh_regulator_vrm_bypass_ops, @@ -878,6 +887,19 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = { {}, };
+static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515_1, "vdd-s2"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"), + RPMH_VREG("ldo7", "ldo%s6", &pmic5_pldo_lv, "vdd-l7"), + {}, +}; + static const struct rpmh_vreg_init_data pm6150_vreg_data[] = { RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"), RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), @@ -976,6 +998,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .compatible = "qcom,pm8009-rpmh-regulators", .data = pm8009_vreg_data, }, + { + .compatible = "qcom,pm8009-1-rpmh-regulators", + .data = pm8009_1_vreg_data, + }, { .compatible = "qcom,pm8150-rpmh-regulators", .data = pm8150_vreg_data,