6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Vasut marek.vasut+renesas@mailbox.org
[ Upstream commit 2bdf1d428f48e1077791bb7f88fd00262118256d ]
R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025 page 4581 Figure 104.3b Initial Setting of PCIEC(example), third quarter of the figure indicates that register 0xf8 should be polled until bit 18 becomes set to 1.
Register 0xf8, bit 18 is 0 immediately after write to PCIERSTCTRL1 and is set to 1 in less than 1 ms afterward. The current readl_poll_timeout() break condition is inverted and returns when register 0xf8, bit 18 is set to 0, which in most cases means immediately. In case CONFIG_DEBUG_LOCK_ALLOC=y, the timing changes just enough for the first readl_poll_timeout() poll to already read register 0xf8, bit 18 as 1 and afterward never read register 0xf8, bit 18 as 0, which leads to timeout and failure to start the PCIe controller.
Fix this by inverting the poll condition to match the reference manual initialization sequence.
Fixes: faf5a975ee3b ("PCI: rcar-gen4: Add support for R-Car V4H") Signed-off-by: Marek Vasut marek.vasut+renesas@mailbox.org Signed-off-by: Manivannan Sadhasivam mani@kernel.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Tested-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://patch.msgid.link/20250915235910.47768-1-marek.vasut+renesas@mailbox.... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pcie-rcar-gen4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c index 30d16f85f6465..14f69efa243c3 100644 --- a/drivers/pci/controller/dwc/pcie-rcar-gen4.c +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c @@ -733,7 +733,7 @@ static int rcar_gen4_pcie_ltssm_control(struct rcar_gen4_pcie *rcar, bool enable val &= ~APP_HOLD_PHY_RST; writel(val, rcar->base + PCIERSTCTRL1);
- ret = readl_poll_timeout(rcar->phy_base + 0x0f8, val, !(val & BIT(18)), 100, 10000); + ret = readl_poll_timeout(rcar->phy_base + 0x0f8, val, val & BIT(18), 100, 10000); if (ret < 0) return ret;