From: Ricardo Ribalda ribalda@chromium.org
commit 619d9b710cf06f7a00a17120ca92333684ac45a8 upstream.
usb_kill_urb warranties that all the handlers are finished when it returns, but does not protect against threads that might be handling asynchronously the urb.
For UVC, the function uvc_ctrl_status_event_async() takes care of control changes asynchronously.
If the code is executed in the following order:
CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_ctrl_status_event_work() uvc_status_start() -> FAIL
Then uvc_status_start will keep failing and this error will be shown:
<4>[ 5.540139] URB 0000000000000000 submitted while active drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528
Let's improve the current situation, by not re-submiting the urb if we are stopping the status event. Also process the queued work (if any) during stop.
CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_status_start() uvc_ctrl_status_event_work() -> FAIL
Hopefully, with the usb layer protection this should be enough to cover all the cases.
Cc: stable@vger.kernel.org Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives") Reviewed-by: Yunke Cao yunkec@chromium.org Signed-off-by: Ricardo Ribalda ribalda@chromium.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/usb/uvc/uvc_ctrl.c | 5 +++++ drivers/media/usb/uvc/uvc_status.c | 37 +++++++++++++++++++++++++++++++++++++ drivers/media/usb/uvc/uvcvideo.h | 1 + 3 files changed, 43 insertions(+)
--- a/drivers/media/usb/uvc/uvc_ctrl.c +++ b/drivers/media/usb/uvc/uvc_ctrl.c @@ -6,6 +6,7 @@ * Laurent Pinchart (laurent.pinchart@ideasonboard.com) */
+#include <asm/barrier.h> #include <linux/bitops.h> #include <linux/kernel.h> #include <linux/list.h> @@ -1509,6 +1510,10 @@ static void uvc_ctrl_status_event_work(s
uvc_ctrl_status_event(w->chain, w->ctrl, w->data);
+ /* The barrier is needed to synchronize with uvc_status_stop(). */ + if (smp_load_acquire(&dev->flush_status)) + return; + /* Resubmit the URB. */ w->urb->interval = dev->int_ep->desc.bInterval; ret = usb_submit_urb(w->urb, GFP_KERNEL); --- a/drivers/media/usb/uvc/uvc_status.c +++ b/drivers/media/usb/uvc/uvc_status.c @@ -6,6 +6,7 @@ * Laurent Pinchart (laurent.pinchart@ideasonboard.com) */
+#include <asm/barrier.h> #include <linux/kernel.h> #include <linux/input.h> #include <linux/slab.h> @@ -309,5 +310,41 @@ int uvc_status_start(struct uvc_device *
void uvc_status_stop(struct uvc_device *dev) { + struct uvc_ctrl_work *w = &dev->async_ctrl; + + /* + * Prevent the asynchronous control handler from requeing the URB. The + * barrier is needed so the flush_status change is visible to other + * CPUs running the asynchronous handler before usb_kill_urb() is + * called below. + */ + smp_store_release(&dev->flush_status, true); + + /* + * Cancel any pending asynchronous work. If any status event was queued, + * process it synchronously. + */ + if (cancel_work_sync(&w->work)) + uvc_ctrl_status_event(w->chain, w->ctrl, w->data); + + /* Kill the urb. */ usb_kill_urb(dev->int_urb); + + /* + * The URB completion handler may have queued asynchronous work. This + * won't resubmit the URB as flush_status is set, but it needs to be + * cancelled before returning or it could then race with a future + * uvc_status_start() call. + */ + if (cancel_work_sync(&w->work)) + uvc_ctrl_status_event(w->chain, w->ctrl, w->data); + + /* + * From this point, there are no events on the queue and the status URB + * is dead. No events will be queued until uvc_status_start() is called. + * The barrier is needed to make sure that flush_status is visible to + * uvc_ctrl_status_event_work() when uvc_status_start() will be called + * again. + */ + smp_store_release(&dev->flush_status, false); } --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -558,6 +558,7 @@ struct uvc_device { /* Status Interrupt Endpoint */ struct usb_host_endpoint *int_ep; struct urb *int_urb; + bool flush_status; u8 *status; struct input_dev *input; char input_phys[64];