4.19-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 706edaa88835e3d8de8920584ad5da76dd3d6666 ]
Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec.
Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000
With the correct voltages the driver can select correct OCMV value to reduce pop noise.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Signed-off-by: Sekhar Nori nsekhar@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/da850-evm.dts | 29 +++++++++++++++++++++++++---- 1 file changed, 25 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index f9b757905845..e0ac195950b1 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -94,6 +94,28 @@ regulator-boot-on; };
+ baseboard_3v3: fixedregulator-3v3 { + /* TPS73701DCQ */ + compatible = "regulator-fixed"; + regulator-name = "baseboard_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vbat>; + regulator-always-on; + regulator-boot-on; + }; + + baseboard_1v8: fixedregulator-1v8 { + /* TPS73701DCQ */ + compatible = "regulator-fixed"; + regulator-name = "baseboard_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vbat>; + regulator-always-on; + regulator-boot-on; + }; + backlight_lcd: backlight-regulator { compatible = "regulator-fixed"; regulator-name = "lcd_backlight_pwr"; @@ -210,10 +232,9 @@
/* Regulators */ IOVDD-supply = <&vdcdc2_reg>; - /* Derived from VBAT: Baseboard 3.3V / 1.8V */ - AVDD-supply = <&vbat>; - DRVDD-supply = <&vbat>; - DVDD-supply = <&vbat>; + AVDD-supply = <&baseboard_3v3>; + DRVDD-supply = <&baseboard_3v3>; + DVDD-supply = <&baseboard_1v8>; }; tca6416: gpio@20 { compatible = "ti,tca6416";