From: Chaotian Jing chaotian.jing@mediatek.com
commit a0d4c7eb71dd08a89ad631177bb0cbbabd598f84 upstream.
MMC IOCTLS with R1B responses may cause the card to enter the busy state, which means it's not ready to receive a new request. To prevent new requests from being sent to the card, use a CMD13 polling loop to verify that the card returns to the transfer state, before completing the request.
Signed-off-by: Chaotian Jing chaotian.jing@mediatek.com Reviewed-by: Avri Altman avri.altman@wdc.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mmc/core/block.c | 147 +++++++++++++++++------------------------------ 1 file changed, 55 insertions(+), 92 deletions(-)
--- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -408,38 +408,6 @@ static int mmc_blk_ioctl_copy_to_user(st return 0; }
-static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status, - u32 retries_max) -{ - int err; - u32 retry_count = 0; - - if (!status || !retries_max) - return -EINVAL; - - do { - err = __mmc_send_status(card, status, 5); - if (err) - break; - - if (!R1_STATUS(*status) && - (R1_CURRENT_STATE(*status) != R1_STATE_PRG)) - break; /* RPMB programming operation complete */ - - /* - * Rechedule to give the MMC device a chance to continue - * processing the previous command without being polled too - * frequently. - */ - usleep_range(1000, 5000); - } while (++retry_count < retries_max); - - if (retry_count == retries_max) - err = -EPERM; - - return err; -} - static int ioctl_do_sanitize(struct mmc_card *card) { int err; @@ -468,6 +436,58 @@ out: return err; }
+static inline bool mmc_blk_in_tran_state(u32 status) +{ + /* + * Some cards mishandle the status bits, so make sure to check both the + * busy indication and the card state. + */ + return status & R1_READY_FOR_DATA && + (R1_CURRENT_STATE(status) == R1_STATE_TRAN); +} + +static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, + u32 *resp_errs) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); + int err = 0; + u32 status; + + do { + bool done = time_after(jiffies, timeout); + + err = __mmc_send_status(card, &status, 5); + if (err) { + dev_err(mmc_dev(card->host), + "error %d requesting status\n", err); + return err; + } + + /* Accumulate any response error bits seen */ + if (resp_errs) + *resp_errs |= status; + + /* + * Timeout if the device never becomes ready for data and never + * leaves the program state. + */ + if (done) { + dev_err(mmc_dev(card->host), + "Card stuck in wrong state! %s status: %#x\n", + __func__, status); + return -ETIMEDOUT; + } + + /* + * Some cards mishandle the status bits, + * so make sure to check both the busy + * indication and the card state. + */ + } while (!mmc_blk_in_tran_state(status)); + + return err; +} + static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md, struct mmc_blk_ioc_data *idata) { @@ -477,7 +497,6 @@ static int __mmc_blk_ioctl_cmd(struct mm struct scatterlist sg; int err; unsigned int target_part; - u32 status = 0;
if (!card || !md || !idata) return -EINVAL; @@ -611,16 +630,12 @@ static int __mmc_blk_ioctl_cmd(struct mm
memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));
- if (idata->rpmb) { + if (idata->rpmb || (cmd.flags & MMC_RSP_R1B)) { /* - * Ensure RPMB command has completed by polling CMD13 + * Ensure RPMB/R1B command has completed by polling CMD13 * "Send Status". */ - err = ioctl_rpmb_card_status_poll(card, &status, 5); - if (err) - dev_err(mmc_dev(card->host), - "%s: Card Status=0x%08X, error %d\n", - __func__, status, err); + err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, NULL); }
return err; @@ -970,58 +985,6 @@ static unsigned int mmc_blk_data_timeout return ms; }
-static inline bool mmc_blk_in_tran_state(u32 status) -{ - /* - * Some cards mishandle the status bits, so make sure to check both the - * busy indication and the card state. - */ - return status & R1_READY_FOR_DATA && - (R1_CURRENT_STATE(status) == R1_STATE_TRAN); -} - -static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms, - u32 *resp_errs) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); - int err = 0; - u32 status; - - do { - bool done = time_after(jiffies, timeout); - - err = __mmc_send_status(card, &status, 5); - if (err) { - dev_err(mmc_dev(card->host), - "error %d requesting status\n", err); - return err; - } - - /* Accumulate any response error bits seen */ - if (resp_errs) - *resp_errs |= status; - - /* - * Timeout if the device never becomes ready for data and never - * leaves the program state. - */ - if (done) { - dev_err(mmc_dev(card->host), - "Card stuck in wrong state! %s status: %#x\n", - __func__, status); - return -ETIMEDOUT; - } - - /* - * Some cards mishandle the status bits, - * so make sure to check both the busy - * indication and the card state. - */ - } while (!mmc_blk_in_tran_state(status)); - - return err; -} - static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host, int type) {