On Fri, 29 Nov 2024 at 11:36, Hans Verkuil hverkuil-cisco@xs4all.nl wrote:
Hi Laurent, Ricardo,
On 28/11/2024 23:33, Laurent Pinchart wrote:
On Thu, Nov 28, 2024 at 11:28:29PM +0100, Ricardo Ribalda wrote:
On Thu, 28 Nov 2024 at 23:22, Laurent Pinchart wrote:
Hi Ricardo,
(CC'ing Hans Verkuil)
Thank you for the patch.
On Wed, Nov 27, 2024 at 12:14:50PM +0000, Ricardo Ribalda wrote:
If a file handle is waiting for a response from an async control, avoid that other file handle operate with it.
Without this patch, the first file handle will never get the event associated with that operation, which can lead to endless loops in applications. Eg: If an application A wants to change the zoom and to know when the operation has completed: it will open the video node, subscribe to the zoom event, change the control and wait for zoom to finish. If before the zoom operation finishes, another application B changes the zoom, the first app A will loop forever.
Hans, the V4L2 specification isn't very clear on this. I see pros and cons for both behaviours, with a preference for the current behaviour, as with this patch the control will remain busy until the file handle is closed if the device doesn't send the control event for any reason. What do you think ?
Just one small clarification. The same file handler can change the value of the async control as many times as it wants, even if the operation has not finished.
It will be other file handles that will get -EBUSY if they try to use an async control with an unfinished operation started by another fh.
Yes, I should have been more precised. If the device doesn't send the control event, then all other file handles will be prevented from setting the control until the file handle that set it first gets closed.
I think I need a bit more background here:
First of all, what is an asynchronous control in UVC? I think that means you can set it, but it takes time for that operation to finish, so you get an event later when the operation is done. So zoom and similar operations are examples of that.
And only when the operation finishes will the control event be sent, correct?
You are correct. This diagrams from the spec is more or less clear: https://ibb.co/MDGn7F3
While the operation is ongoing, if you query the control value, is that reporting the current position or the final position?
I'd expect hardware will return either the current position, the start position or the final position. I could not find anything in the spec that points in one direction or the others.
And in the driver I believe that we might have a bug handling this case (will send a patch if I can confirm it) the zoom is at 0 and you set it 10 if you read the value 2 times before the camera reaches value 10: - First value will come from the hardware and the response will be cached - Second value will be the cached one
now the camera is at zoom 10 If you read the value, you will read the cached value
E.g.: the zoom control is at value 0 and I set it to 10, then I poll the zoom control value: will that report the intermediate values until it reaches 10? And when it is at 10, the control event is sent?
Regards,
HansCc: stable@vger.kernel.org Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives") Signed-off-by: Ricardo Ribalda ribalda@chromium.org
drivers/media/usb/uvc/uvc_ctrl.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c index b6af4ff92cbd..3f8ae35cb3bc 100644 --- a/drivers/media/usb/uvc/uvc_ctrl.c +++ b/drivers/media/usb/uvc/uvc_ctrl.c @@ -1955,6 +1955,10 @@ int uvc_ctrl_set(struct uvc_fh *handle, if (!(ctrl->info.flags & UVC_CTRL_FLAG_SET_CUR)) return -EACCES;
/* Other file handle is waiting a response from this async control. */if (ctrl->handle && ctrl->handle != handle)return -EBUSY;/* Clamp out of range values. */ switch (mapping->v4l2_type) { case V4L2_CTRL_TYPE_INTEGER: