6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kathiravan Thirumoorthy kathiravan.thirumoorthy@oss.qualcomm.com
commit 4a3556b81b99f0c8c0358f7cc6801a62b4538fe2 upstream.
The current configuration used for the IPQ5332 M31 USB PHY fails the Near End High Speed Signal Quality compliance test. To resolve this, update the initialization sequence as specified in the Hardware Design Document.
Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver") Cc: stable@kernel.org Signed-off-by: Kathiravan Thirumoorthy kathiravan.thirumoorthy@oss.qualcomm.com Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com Link: https://lore.kernel.org/r/20250630-ipq5332_hsphy_complaince-v2-1-63621439ebd... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/phy/qualcomm/phy-qcom-m31.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/phy/qualcomm/phy-qcom-m31.c +++ b/drivers/phy/qualcomm/phy-qcom-m31.c @@ -58,14 +58,16 @@ #define USB2_0_TX_ENABLE BIT(2)
#define USB2PHY_USB_PHY_M31_XCFGI_4 0xc8 - #define HSTX_SLEW_RATE_565PS GENMASK(1, 0) + #define HSTX_SLEW_RATE_400PS GENMASK(2, 0) #define PLL_CHARGING_PUMP_CURRENT_35UA GENMASK(4, 3) #define ODT_VALUE_38_02_OHM GENMASK(7, 6)
#define USB2PHY_USB_PHY_M31_XCFGI_5 0xcc - #define ODT_VALUE_45_02_OHM BIT(2) #define HSTX_PRE_EMPHASIS_LEVEL_0_55MA BIT(0)
+#define USB2PHY_USB_PHY_M31_XCFGI_9 0xdc + #define HSTX_CURRENT_17_1MA_385MV BIT(1) + #define USB2PHY_USB_PHY_M31_XCFGI_11 0xe4 #define XCFG_COARSE_TUNE_NUM BIT(1) #define XCFG_FINE_TUNE_NUM BIT(3) @@ -164,7 +166,7 @@ static struct m31_phy_regs m31_ipq5332_r }, { USB2PHY_USB_PHY_M31_XCFGI_4, - HSTX_SLEW_RATE_565PS | PLL_CHARGING_PUMP_CURRENT_35UA | ODT_VALUE_38_02_OHM, + HSTX_SLEW_RATE_400PS | PLL_CHARGING_PUMP_CURRENT_35UA | ODT_VALUE_38_02_OHM, 0 }, { @@ -174,10 +176,14 @@ static struct m31_phy_regs m31_ipq5332_r }, { USB2PHY_USB_PHY_M31_XCFGI_5, - ODT_VALUE_45_02_OHM | HSTX_PRE_EMPHASIS_LEVEL_0_55MA, + HSTX_PRE_EMPHASIS_LEVEL_0_55MA, 4 }, { + USB2PHY_USB_PHY_M31_XCFGI_9, + HSTX_CURRENT_17_1MA_385MV, + }, + { USB_PHY_UTMI_CTRL5, 0x0, 0