From: Fabio Estevam festevam@gmail.com
commit f81f095e87715e198471f4653952fe5e3f824874 upstream.
The intention of commit 886a9c134755 ("PCI: dwc: Move link handling into common code") was to standardize the behavior of link down as explained in its commit log:
"The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device."
The pci-imx6 still fails to probe when the link is not present, which causes the following warning:
imx6q-pcie 8ffc000.pcie: Phy link never came up imx6q-pcie: probe of 8ffc000.pcie failed with error -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 30 at drivers/regulator/core.c:2257 _regulator_put.part.0+0x1b8/0x1dc Modules linked in: CPU: 0 PID: 30 Comm: kworker/u2:2 Not tainted 5.15.0-next-20211103 #1 Hardware name: Freescale i.MX6 SoloX (Device Tree) Workqueue: events_unbound async_run_entry_fn [<c0111730>] (unwind_backtrace) from [<c010bb74>] (show_stack+0x10/0x14) [<c010bb74>] (show_stack) from [<c0f90290>] (dump_stack_lvl+0x58/0x70) [<c0f90290>] (dump_stack_lvl) from [<c012631c>] (__warn+0xd4/0x154) [<c012631c>] (__warn) from [<c0f87b00>] (warn_slowpath_fmt+0x74/0xa8) [<c0f87b00>] (warn_slowpath_fmt) from [<c076b4bc>] (_regulator_put.part.0+0x1b8/0x1dc) [<c076b4bc>] (_regulator_put.part.0) from [<c076b574>] (regulator_put+0x2c/0x3c) [<c076b574>] (regulator_put) from [<c08c3740>] (release_nodes+0x50/0x178)
Fix this problem by ignoring the dw_pcie_wait_for_link() error like it is done on the other dwc drivers.
Tested on imx6sx-sdb and imx6q-sabresd boards.
Link: https://lore.kernel.org/r/20220106103645.2790803-1-festevam@gmail.com Fixes: 886a9c134755 ("PCI: dwc: Move link handling into common code") Signed-off-by: Fabio Estevam festevam@gmail.com Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Rob Herring robh@kernel.org Reviewed-by: Richard Zhu hongxing.zhu@nxp.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/controller/dwc/pci-imx6.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-)
--- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -809,9 +809,7 @@ static int imx6_pcie_start_link(struct d /* Start LTSSM. */ imx6_pcie_ltssm_enable(dev);
- ret = dw_pcie_wait_for_link(pci); - if (ret) - goto err_reset_phy; + dw_pcie_wait_for_link(pci);
if (pci->link_gen == 2) { /* Allow Gen2 mode after the link is up. */ @@ -847,11 +845,7 @@ static int imx6_pcie_start_link(struct d }
/* Make sure link training is finished as well! */ - ret = dw_pcie_wait_for_link(pci); - if (ret) { - dev_err(dev, "Failed to bring link up!\n"); - goto err_reset_phy; - } + dw_pcie_wait_for_link(pci); } else { dev_info(dev, "Link: Gen2 disabled\n"); }