6.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yu Kuai yukuai3@huawei.com
commit cd5fc653381811f1e0ba65f5d169918cab61476f upstream.
There are two BUG reports that raid5 will hang at bitmap_startwrite([1],[2]), root cause is that bitmap start write and end write is unbalanced, it's not quite clear where, and while reviewing raid5 code, it's found that bitmap operations can be optimized. For example, for a 4 disks raid5, with chunksize=8k, if user issue a IO (0 + 48k) to the array:
┌────────────────────────────────────────────────────────────┐ │chunk 0 │ │ ┌────────────┬─────────────┬─────────────┬────────────┼ │ sh0 │A0: 0 + 4k │A1: 8k + 4k │A2: 16k + 4k │A3: P │ │ ┼────────────┼─────────────┼─────────────┼────────────┼ │ sh1 │B0: 4k + 4k │B1: 12k + 4k │B2: 20k + 4k │B3: P │ ┼──────┴────────────┴─────────────┴─────────────┴────────────┼ │chunk 1 │ │ ┌────────────┬─────────────┬─────────────┬────────────┤ │ sh2 │C0: 24k + 4k│C1: 32k + 4k │C2: P │C3: 40k + 4k│ │ ┼────────────┼─────────────┼─────────────┼────────────┼ │ sh3 │D0: 28k + 4k│D1: 36k + 4k │D2: P │D3: 44k + 4k│ └──────┴────────────┴─────────────┴─────────────┴────────────┘
Before this patch, 4 stripe head will be used, and each sh will attach bio for 3 disks, and each attached bio will trigger bitmap_startwrite() once, which means total 12 times. - 3 times (0 + 4k), for (A0, A1 and A2) - 3 times (4 + 4k), for (B0, B1 and B2) - 3 times (8 + 4k), for (C0, C1 and C3) - 3 times (12 + 4k), for (D0, D1 and D3)
After this patch, md upper layer will calculate that IO range (0 + 48k) is corresponding to the bitmap (0 + 16k), and call bitmap_startwrite() just once.
Noted that this patch will align bitmap ranges to the chunks, for example, if user issue a IO (0 + 4k) to array:
- Before this patch, 1 time (0 + 4k), for A0; - After this patch, 1 time (0 + 8k) for chunk 0;
Usually, one bitmap bit will represent more than one disk chunk, and this doesn't have any difference. And even if user really created a array that one chunk contain multiple bits, the overhead is that more data will be recovered after power failure.
Also remove STRIPE_BITMAP_PENDING since it's not used anymore.
[1] https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts9... [2] https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcircu...
Signed-off-by: Yu Kuai yukuai3@huawei.com Link: https://lore.kernel.org/r/20250109015145.158868-6-yukuai1@huaweicloud.com Signed-off-by: Song Liu song@kernel.org Signed-off-by: Yu Kuai yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/md.c | 29 +++++++++++++++++++++++++++ drivers/md/md.h | 2 + drivers/md/raid1.c | 4 --- drivers/md/raid10.c | 3 -- drivers/md/raid5-cache.c | 2 - drivers/md/raid5.c | 50 +++++------------------------------------------ drivers/md/raid5.h | 3 -- 7 files changed, 37 insertions(+), 56 deletions(-)
--- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8745,12 +8745,32 @@ void md_submit_discard_bio(struct mddev } EXPORT_SYMBOL_GPL(md_submit_discard_bio);
+static void md_bitmap_start(struct mddev *mddev, + struct md_io_clone *md_io_clone) +{ + if (mddev->pers->bitmap_sector) + mddev->pers->bitmap_sector(mddev, &md_io_clone->offset, + &md_io_clone->sectors); + + mddev->bitmap_ops->startwrite(mddev, md_io_clone->offset, + md_io_clone->sectors); +} + +static void md_bitmap_end(struct mddev *mddev, struct md_io_clone *md_io_clone) +{ + mddev->bitmap_ops->endwrite(mddev, md_io_clone->offset, + md_io_clone->sectors); +} + static void md_end_clone_io(struct bio *bio) { struct md_io_clone *md_io_clone = bio->bi_private; struct bio *orig_bio = md_io_clone->orig_bio; struct mddev *mddev = md_io_clone->mddev;
+ if (bio_data_dir(orig_bio) == WRITE && mddev->bitmap) + md_bitmap_end(mddev, md_io_clone); + if (bio->bi_status && !orig_bio->bi_status) orig_bio->bi_status = bio->bi_status;
@@ -8775,6 +8795,12 @@ static void md_clone_bio(struct mddev *m if (blk_queue_io_stat(bdev->bd_disk->queue)) md_io_clone->start_time = bio_start_io_acct(*bio);
+ if (bio_data_dir(*bio) == WRITE && mddev->bitmap) { + md_io_clone->offset = (*bio)->bi_iter.bi_sector; + md_io_clone->sectors = bio_sectors(*bio); + md_bitmap_start(mddev, md_io_clone); + } + clone->bi_end_io = md_end_clone_io; clone->bi_private = md_io_clone; *bio = clone; @@ -8793,6 +8819,9 @@ void md_free_cloned_bio(struct bio *bio) struct bio *orig_bio = md_io_clone->orig_bio; struct mddev *mddev = md_io_clone->mddev;
+ if (bio_data_dir(orig_bio) == WRITE && mddev->bitmap) + md_bitmap_end(mddev, md_io_clone); + if (bio->bi_status && !orig_bio->bi_status) orig_bio->bi_status = bio->bi_status;
--- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -831,6 +831,8 @@ struct md_io_clone { struct mddev *mddev; struct bio *orig_bio; unsigned long start_time; + sector_t offset; + unsigned long sectors; struct bio bio_clone; };
--- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -422,8 +422,6 @@ static void close_write(struct r1bio *r1
if (test_bit(R1BIO_BehindIO, &r1_bio->state)) mddev->bitmap_ops->end_behind_write(mddev); - /* clear the bitmap if all writes complete successfully */ - mddev->bitmap_ops->endwrite(mddev, r1_bio->sector, r1_bio->sectors); md_write_end(mddev); }
@@ -1632,8 +1630,6 @@ static void raid1_write_request(struct m
if (test_bit(R1BIO_BehindIO, &r1_bio->state)) mddev->bitmap_ops->start_behind_write(mddev); - mddev->bitmap_ops->startwrite(mddev, r1_bio->sector, - r1_bio->sectors); first_clone = 0; }
--- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -428,8 +428,6 @@ static void close_write(struct r10bio *r { struct mddev *mddev = r10_bio->mddev;
- /* clear the bitmap if all writes complete successfully */ - mddev->bitmap_ops->endwrite(mddev, r10_bio->sector, r10_bio->sectors); md_write_end(mddev); }
@@ -1506,7 +1504,6 @@ static void raid10_write_request(struct md_account_bio(mddev, &bio); r10_bio->master_bio = bio; atomic_set(&r10_bio->remaining, 1); - mddev->bitmap_ops->startwrite(mddev, r10_bio->sector, r10_bio->sectors);
for (i = 0; i < conf->copies; i++) { if (r10_bio->devs[i].bio) --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -313,8 +313,6 @@ void r5c_handle_cached_data_endio(struct if (sh->dev[i].written) { set_bit(R5_UPTODATE, &sh->dev[i].flags); r5c_return_dev_pending_writes(conf, &sh->dev[i]); - conf->mddev->bitmap_ops->endwrite(conf->mddev, - sh->sector, RAID5_STRIPE_SECTORS(conf)); } } } --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -906,8 +906,7 @@ static bool stripe_can_batch(struct stri if (raid5_has_log(conf) || raid5_has_ppl(conf)) return false; return test_bit(STRIPE_BATCH_READY, &sh->state) && - !test_bit(STRIPE_BITMAP_PENDING, &sh->state) && - is_full_stripe_write(sh); + is_full_stripe_write(sh); }
/* we only do back search */ @@ -3545,29 +3544,9 @@ static void __add_stripe_bio(struct stri (*bip)->bi_iter.bi_sector, sh->sector, dd_idx, sh->dev[dd_idx].sector);
- if (conf->mddev->bitmap && firstwrite) { - /* Cannot hold spinlock over bitmap_startwrite, - * but must ensure this isn't added to a batch until - * we have added to the bitmap and set bm_seq. - * So set STRIPE_BITMAP_PENDING to prevent - * batching. - * If multiple __add_stripe_bio() calls race here they - * much all set STRIPE_BITMAP_PENDING. So only the first one - * to complete "bitmap_startwrite" gets to set - * STRIPE_BIT_DELAY. This is important as once a stripe - * is added to a batch, STRIPE_BIT_DELAY cannot be changed - * any more. - */ - set_bit(STRIPE_BITMAP_PENDING, &sh->state); - spin_unlock_irq(&sh->stripe_lock); - conf->mddev->bitmap_ops->startwrite(conf->mddev, sh->sector, - RAID5_STRIPE_SECTORS(conf)); - spin_lock_irq(&sh->stripe_lock); - clear_bit(STRIPE_BITMAP_PENDING, &sh->state); - if (!sh->batch_head) { - sh->bm_seq = conf->seq_flush+1; - set_bit(STRIPE_BIT_DELAY, &sh->state); - } + if (conf->mddev->bitmap && firstwrite && !sh->batch_head) { + sh->bm_seq = conf->seq_flush+1; + set_bit(STRIPE_BIT_DELAY, &sh->state); } }
@@ -3618,7 +3597,6 @@ handle_failed_stripe(struct r5conf *conf BUG_ON(sh->batch_head); for (i = disks; i--; ) { struct bio *bi; - int bitmap_end = 0;
if (test_bit(R5_ReadError, &sh->dev[i].flags)) { struct md_rdev *rdev = conf->disks[i].rdev; @@ -3643,8 +3621,6 @@ handle_failed_stripe(struct r5conf *conf sh->dev[i].towrite = NULL; sh->overwrite_disks = 0; spin_unlock_irq(&sh->stripe_lock); - if (bi) - bitmap_end = 1;
log_stripe_write_finished(sh);
@@ -3659,10 +3635,6 @@ handle_failed_stripe(struct r5conf *conf bio_io_error(bi); bi = nextbi; } - if (bitmap_end) - conf->mddev->bitmap_ops->endwrite(conf->mddev, - sh->sector, RAID5_STRIPE_SECTORS(conf)); - bitmap_end = 0; /* and fail all 'written' */ bi = sh->dev[i].written; sh->dev[i].written = NULL; @@ -3671,7 +3643,6 @@ handle_failed_stripe(struct r5conf *conf sh->dev[i].page = sh->dev[i].orig_page; }
- if (bi) bitmap_end = 1; while (bi && bi->bi_iter.bi_sector < sh->dev[i].sector + RAID5_STRIPE_SECTORS(conf)) { struct bio *bi2 = r5_next_bio(conf, bi, sh->dev[i].sector); @@ -3705,9 +3676,6 @@ handle_failed_stripe(struct r5conf *conf bi = nextbi; } } - if (bitmap_end) - conf->mddev->bitmap_ops->endwrite(conf->mddev, - sh->sector, RAID5_STRIPE_SECTORS(conf)); /* If we were in the middle of a write the parity block might * still be locked - so just clear all R5_LOCKED flags */ @@ -4056,8 +4024,7 @@ returnbi: bio_endio(wbi); wbi = wbi2; } - conf->mddev->bitmap_ops->endwrite(conf->mddev, - sh->sector, RAID5_STRIPE_SECTORS(conf)); + if (head_sh->batch_head) { sh = list_first_entry(&sh->batch_list, struct stripe_head, @@ -4882,8 +4849,7 @@ static void break_stripe_batch_list(stru (1 << STRIPE_COMPUTE_RUN) | (1 << STRIPE_DISCARD) | (1 << STRIPE_BATCH_READY) | - (1 << STRIPE_BATCH_ERR) | - (1 << STRIPE_BITMAP_PENDING)), + (1 << STRIPE_BATCH_ERR)), "stripe state: %lx\n", sh->state); WARN_ONCE(head_sh->state & ((1 << STRIPE_DISCARD) | (1 << STRIPE_REPLACED)), @@ -5774,10 +5740,6 @@ static void make_discard_request(struct } spin_unlock_irq(&sh->stripe_lock); if (conf->mddev->bitmap) { - for (d = 0; d < conf->raid_disks - conf->max_degraded; - d++) - mddev->bitmap_ops->startwrite(mddev, sh->sector, - RAID5_STRIPE_SECTORS(conf)); sh->bm_seq = conf->seq_flush + 1; set_bit(STRIPE_BIT_DELAY, &sh->state); } --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -371,9 +371,6 @@ enum { STRIPE_ON_RELEASE_LIST, STRIPE_BATCH_READY, STRIPE_BATCH_ERR, - STRIPE_BITMAP_PENDING, /* Being added to bitmap, don't add - * to batch yet. - */ STRIPE_LOG_TRAPPED, /* trapped into log (see raid5-cache.c) * this bit is used in two scenarios: *