[ Upstream commit fdadd04931c2d7cd294dc5b2b342863f94be53a3 ]
Michael and Sandipan report:
Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF JIT allocations. At compile time it defaults to PAGE_SIZE * 40000, and is adjusted again at init time if MODULES_VADDR is defined.
For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with the compile-time default at boot-time, which is 0x9c400000 when using 64K page size. This overflows the signed 32-bit bpf_jit_limit value:
root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit -1673527296
and can cause various unexpected failures throughout the network stack. In one case `strace dhclient eth0` reported:
setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8}, 16) = -1 ENOTSUPP (Unknown error 524)
and similar failures can be seen with tools like tcpdump. This doesn't always reproduce however, and I'm not sure why. The more consistent failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9 host would time out on systemd/netplan configuring a virtio-net NIC with no noticeable errors in the logs.
Given this and also given that in near future some architectures like arm64 will have a custom area for BPF JIT image allocations we should get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For 4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec() so therefore add another overridable bpf_jit_alloc_exec_limit() helper function which returns the possible size of the memory area for deriving the default heuristic in bpf_jit_charge_init().
Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default JIT memory provider, and therefore in case archs implement their custom module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}.
Additionally, for archs supporting large page sizes, we should change the sysctl to be handled as long to not run into sysctl restrictions in future.
Fixes: ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations") Reported-by: Sandipan Das sandipan@linux.ibm.com Reported-by: Michael Roth mdroth@linux.vnet.ibm.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Tested-by: Michael Roth mdroth@linux.vnet.ibm.com Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/filter.h | 2 +- kernel/bpf/core.c | 21 +++++++++++++++------ net/core/sysctl_net_core.c | 20 +++++++++++++++++--- 3 files changed, 33 insertions(+), 10 deletions(-)
diff --git a/include/linux/filter.h b/include/linux/filter.h index b0b00cdff4333..5ca676d646529 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -729,7 +729,7 @@ struct sock *do_sk_redirect_map(struct sk_buff *skb); extern int bpf_jit_enable; extern int bpf_jit_harden; extern int bpf_jit_kallsyms; -extern int bpf_jit_limit; +extern long bpf_jit_limit;
typedef void (*bpf_jit_fill_hole_t)(void *area, unsigned int size);
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 2c40159038ef8..e7211b0fa27cf 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -290,13 +290,11 @@ struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off, }
#ifdef CONFIG_BPF_JIT -# define BPF_JIT_LIMIT_DEFAULT (PAGE_SIZE * 40000) - /* All BPF JIT sysctl knobs here. */ int bpf_jit_enable __read_mostly = IS_BUILTIN(CONFIG_BPF_JIT_ALWAYS_ON); int bpf_jit_harden __read_mostly; int bpf_jit_kallsyms __read_mostly; -int bpf_jit_limit __read_mostly = BPF_JIT_LIMIT_DEFAULT; +long bpf_jit_limit __read_mostly;
static __always_inline void bpf_get_prog_addr_region(const struct bpf_prog *prog, @@ -494,16 +492,27 @@ int bpf_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
static atomic_long_t bpf_jit_current;
+/* Can be overridden by an arch's JIT compiler if it has a custom, + * dedicated BPF backend memory area, or if neither of the two + * below apply. + */ +u64 __weak bpf_jit_alloc_exec_limit(void) +{ #if defined(MODULES_VADDR) + return MODULES_END - MODULES_VADDR; +#else + return VMALLOC_END - VMALLOC_START; +#endif +} + static int __init bpf_jit_charge_init(void) { /* Only used as heuristic here to derive limit. */ - bpf_jit_limit = min_t(u64, round_up((MODULES_END - MODULES_VADDR) >> 2, - PAGE_SIZE), INT_MAX); + bpf_jit_limit = min_t(u64, round_up(bpf_jit_alloc_exec_limit() >> 2, + PAGE_SIZE), LONG_MAX); return 0; } pure_initcall(bpf_jit_charge_init); -#endif
static int bpf_jit_charge_modmem(u32 pages) { diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c index b10d839aeee79..144cd1acd7e3e 100644 --- a/net/core/sysctl_net_core.c +++ b/net/core/sysctl_net_core.c @@ -29,6 +29,8 @@ static int two __maybe_unused = 2; static int min_sndbuf = SOCK_MIN_SNDBUF; static int min_rcvbuf = SOCK_MIN_RCVBUF; static int max_skb_frags = MAX_SKB_FRAGS; +static long long_one __maybe_unused = 1; +static long long_max __maybe_unused = LONG_MAX;
static int net_msg_warn; /* Unused, but still a sysctl */
@@ -282,6 +284,17 @@ proc_dointvec_minmax_bpf_restricted(struct ctl_table *table, int write,
return proc_dointvec_minmax(table, write, buffer, lenp, ppos); } + +static int +proc_dolongvec_minmax_bpf_restricted(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) +{ + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + return proc_doulongvec_minmax(table, write, buffer, lenp, ppos); +} #endif
static struct ctl_table net_core_table[] = { @@ -391,10 +404,11 @@ static struct ctl_table net_core_table[] = { { .procname = "bpf_jit_limit", .data = &bpf_jit_limit, - .maxlen = sizeof(int), + .maxlen = sizeof(long), .mode = 0600, - .proc_handler = proc_dointvec_minmax_bpf_restricted, - .extra1 = &one, + .proc_handler = proc_dolongvec_minmax_bpf_restricted, + .extra1 = &long_one, + .extra2 = &long_max, }, #endif {