From: Vladimir Oltean olteanv@gmail.com
[ Upstream commit c7861adbe37f576931650ad8ef805e0c47564b9a ]
Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus. But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC are pointing towards the same internal PCS. Therefore nobody is controlling the internal PCS of eTSEC0.
Upon initial ndo_open, the SGMII link is ok by virtue of U-boot initialization. But upon an ifdown/ifup sequence, the code path from ndo_open -> init_phy -> gfar_configure_serdes does not get executed for the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII link remains down for eTSEC0. On the LS1021A-TWR board, to signal this failure condition, the PHY driver keeps printing '803x_aneg_done: SGMII link is not ok'.
Also, it changes compatible of mdio0 to "fsl,etsec2-mdio" to match mdio1 device.
Fixes: 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR") Signed-off-by: Vladimir Oltean olteanv@gmail.com Reviewed-by: Claudiu Manoil claudiu.manoil@nxp.com Acked-by: Li Yang leoyang.li@nxp.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/ls1021a-twr.dts | 9 ++++++++- arch/arm/boot/dts/ls1021a.dtsi | 11 ++++++++++- 2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index f0c949d74833..ec5afad3efd8 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -143,7 +143,7 @@ };
&enet0 { - tbi-handle = <&tbi1>; + tbi-handle = <&tbi0>; phy-handle = <&sgmii_phy2>; phy-connection-type = "sgmii"; status = "okay"; @@ -222,6 +222,13 @@ sgmii_phy2: ethernet-phy@2 { reg = <0x2>; }; + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { tbi1: tbi-phy@1f { reg = <0x1f>; device_type = "tbi-phy"; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index f18490548c78..7e22309bccac 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -584,7 +584,7 @@ };
mdio0: mdio@2d24000 { - compatible = "gianfar"; + compatible = "fsl,etsec2-mdio"; device_type = "mdio"; #address-cells = <1>; #size-cells = <0>; @@ -592,6 +592,15 @@ <0x0 0x2d10030 0x0 0x4>; };
+ mdio1: mdio@2d64000 { + compatible = "fsl,etsec2-mdio"; + device_type = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2d64000 0x0 0x4000>, + <0x0 0x2d50030 0x0 0x4>; + }; + ptp_clock@2d10e00 { compatible = "fsl,etsec-ptp"; reg = <0x0 0x2d10e00 0x0 0xb0>;