The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ad5185735f7dab342fdd0dd41044da4c9ccfef67 Mon Sep 17 00:00:00 2001 From: Kees Cook keescook@chromium.org Date: Mon, 24 Jan 2022 09:20:28 -0800 Subject: [PATCH] net/mlx5e: Avoid field-overflowing memcpy()
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields.
Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler.
We were doing:
#define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE);
target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes).
struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */
/* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ };
struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */
/* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ };
struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */
/* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ };
So, split the memcpy() so the compiler can reason about the buffer sizes.
"pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations).
Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Kees Cook keescook@chromium.org Signed-off-by: Saeed Mahameed saeedm@nvidia.com
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 812e6810cb3b..c14e06ca64d8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -224,7 +224,7 @@ static inline int mlx5e_get_max_num_channels(struct mlx5_core_dev *mdev) struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; struct mlx5_wqe_eth_seg eth; - struct mlx5_wqe_data_seg data[0]; + struct mlx5_wqe_data_seg data[]; };
struct mlx5e_rx_wqe_ll { @@ -241,8 +241,8 @@ struct mlx5e_umr_wqe { struct mlx5_wqe_umr_ctrl_seg uctrl; struct mlx5_mkey_seg mkc; union { - struct mlx5_mtt inline_mtts[0]; - struct mlx5_klm inline_klms[0]; + DECLARE_FLEX_ARRAY(struct mlx5_mtt, inline_mtts); + DECLARE_FLEX_ARRAY(struct mlx5_klm, inline_klms); }; };
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c index 338d65e2c9ce..56e10c84a706 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c @@ -341,8 +341,10 @@ mlx5e_xmit_xdp_frame(struct mlx5e_xdpsq *sq, struct mlx5e_xmit_data *xdptxd,
/* copy the inline part if required */ if (sq->min_inline_mode != MLX5_INLINE_MODE_NONE) { - memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); + memcpy(eseg->inline_hdr.start, xdptxd->data, sizeof(eseg->inline_hdr.start)); eseg->inline_hdr.sz = cpu_to_be16(MLX5E_XDP_MIN_INLINE); + memcpy(dseg, xdptxd->data + sizeof(eseg->inline_hdr.start), + MLX5E_XDP_MIN_INLINE - sizeof(eseg->inline_hdr.start)); dma_len -= MLX5E_XDP_MIN_INLINE; dma_addr += MLX5E_XDP_MIN_INLINE; dseg++;