From: Max Krummenacher max.krummenacher@toradex.com
This reverts commit 15a3adfe75937c9e4e0e48f0ed40dd39a0e526e2.
The backport of [1] relies on having [2] also backported. Having only one of the two results in a bogus hw->timing1 setting.
If only [2] is backportet the 16 bit register value likely underflows resulting in a busy_wait_timeout of 0. Or if only [1] is applied the value likely overflows with chances of having last 16 LSBs all 0 which would then result in a busy_wait_timeout of 0 too.
Both cases may lead to NAND data corruption, e.g. on a Colibri iMX7 setup this has been seen.
[1] commit 0fddf9ad06fd ("mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times") [2] commit 06781a5026350 ("mtd: rawnand: gpmi: Fix setting busy timeout setting")
Signed-off-by: Max Krummenacher max.krummenacher@toradex.com --- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index b806a762d079f..fdf5cf5565f99 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -684,7 +684,7 @@ static void gpmi_nfc_compute_timings(struct gpmi_nand_data *this, hw->timing0 = BF_GPMI_TIMING0_ADDRESS_SETUP(addr_setup_cycles) | BF_GPMI_TIMING0_DATA_HOLD(data_hold_cycles) | BF_GPMI_TIMING0_DATA_SETUP(data_setup_cycles); - hw->timing1 = BF_GPMI_TIMING1_BUSY_TIMEOUT(busy_timeout_cycles * 4096); + hw->timing1 = BF_GPMI_TIMING1_BUSY_TIMEOUT(DIV_ROUND_UP(busy_timeout_cycles, 4096));
/* * Derive NFC ideal delay from {3}: