From: Fabrice Gasnier fabrice.gasnier@st.com
[ Upstream commit c91e3234c6035baf5a79763cb4fcd5d23ce75c2b ]
LPTimer can use a 32KHz clock for counting. It depends on clock tree configuration. In such a case, PWM output frequency range is limited. Although unlikely, nothing prevents user from requesting a PWM frequency above counting clock (32KHz for instance): - This causes (prd - 1) = 0xffff to be written in ARR register later in the apply() routine. This results in badly configured PWM period (and also duty_cycle). Add a check to report an error is such a case.
Signed-off-by: Fabrice Gasnier fabrice.gasnier@st.com Reviewed-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pwm/pwm-stm32-lp.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c index 2211a642066db..97a9afa191ee0 100644 --- a/drivers/pwm/pwm-stm32-lp.c +++ b/drivers/pwm/pwm-stm32-lp.c @@ -59,6 +59,12 @@ static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm, /* Calculate the period and prescaler value */ div = (unsigned long long)clk_get_rate(priv->clk) * state->period; do_div(div, NSEC_PER_SEC); + if (!div) { + /* Clock is too slow to achieve requested period. */ + dev_dbg(priv->chip.dev, "Can't reach %u ns\n", state->period); + return -EINVAL; + } + prd = div; while (div > STM32_LPTIM_MAX_ARR) { presc++;