From: Keith Busch kbusch@kernel.org
Some devices are reporting Controller Ready Modes Supported, but return 0 for CRTO. These devices require a much higher time to ready than that, so they are failing to initialize after the driver started preferring that value over CAP.TO.
The spec requires CAP.TO match the appropritate CRTO value, or be set to 0xff if CRTO is larger than that. This means that CAP.TO can be used to validate if CRTO is reliable, and provides an appropriate fallback for setting the timeout value if not. Use whichever is larger.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217863 Reported-by: Cláudio Sampaio patola@gmail.com Reported-by: Felix Yan felixonmars@archlinux.org Based-on-a-patch-by: Felix Yan felixonmars@archlinux.org Reviewed-by: Sagi Grimberg sagi@grimberg.me Cc: stable@vger.kernel.org Signed-off-by: Keith Busch kbusch@kernel.org --- v1->v2: Warn once if driver isn't relying on CRTO values
drivers/nvme/host/core.c | 54 ++++++++++++++++++++++++++-------------- 1 file changed, 35 insertions(+), 19 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 37b6fa7466620..0685ed4f2dc49 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2245,25 +2245,8 @@ int nvme_enable_ctrl(struct nvme_ctrl *ctrl) else ctrl->ctrl_config = NVME_CC_CSS_NVM;
- if (ctrl->cap & NVME_CAP_CRMS_CRWMS) { - u32 crto; - - ret = ctrl->ops->reg_read32(ctrl, NVME_REG_CRTO, &crto); - if (ret) { - dev_err(ctrl->device, "Reading CRTO failed (%d)\n", - ret); - return ret; - } - - if (ctrl->cap & NVME_CAP_CRMS_CRIMS) { - ctrl->ctrl_config |= NVME_CC_CRIME; - timeout = NVME_CRTO_CRIMT(crto); - } else { - timeout = NVME_CRTO_CRWMT(crto); - } - } else { - timeout = NVME_CAP_TIMEOUT(ctrl->cap); - } + if (ctrl->cap & NVME_CAP_CRMS_CRWMS && ctrl->cap & NVME_CAP_CRMS_CRIMS) + ctrl->ctrl_config |= NVME_CC_CRIME;
ctrl->ctrl_config |= (NVME_CTRL_PAGE_SHIFT - 12) << NVME_CC_MPS_SHIFT; ctrl->ctrl_config |= NVME_CC_AMS_RR | NVME_CC_SHN_NONE; @@ -2277,6 +2260,39 @@ int nvme_enable_ctrl(struct nvme_ctrl *ctrl) if (ret) return ret;
+ /* CAP value may change after initial CC write */ + ret = ctrl->ops->reg_read64(ctrl, NVME_REG_CAP, &ctrl->cap); + if (ret) + return ret; + + timeout = NVME_CAP_TIMEOUT(ctrl->cap); + if (ctrl->cap & NVME_CAP_CRMS_CRWMS) { + u32 crto, ready_timeout; + + ret = ctrl->ops->reg_read32(ctrl, NVME_REG_CRTO, &crto); + if (ret) { + dev_err(ctrl->device, "Reading CRTO failed (%d)\n", + ret); + return ret; + } + + /* + * CRTO should always be greater or equal to CAP.TO, but some + * devices are known to get this wrong. Use the larger of the + * two values. + */ + if (ctrl->ctrl_config & NVME_CC_CRIME) + ready_timeout = NVME_CRTO_CRIMT(crto); + else + ready_timeout = NVME_CRTO_CRWMT(crto); + + if (ready_timeout < timeout) + dev_warn_once(ctrl->device, "bad crto:%x cap:%llx\n", + crto, ctrl->cap); + else + timeout = ready_timeout; + } + ctrl->ctrl_config |= NVME_CC_ENABLE; ret = ctrl->ops->reg_write32(ctrl, NVME_REG_CC, ctrl->ctrl_config); if (ret)