From: Nicolas Saenz Julienne nsaenz@kernel.org
[ Upstream commit c9107dd0b851777d7e134420baf13a5c5343bc16 ]
There is a known bug on BCM2711's SDHCI core integration where the controller will hang when the difference between the core clock and the bus clock is too great. Specifically this can be reproduced under the following conditions:
- No SD card plugged in, polling thread is running, probing cards at 100 kHz. - BCM2711's core clock configured at 500MHz or more.
So set 200 kHz as the minimum clock frequency available for that board.
For more information on the issue see this: https://lore.kernel.org/linux-mmc/20210322185816.27582-1-nsaenz@kernel.org/T...
Fixes: f84e411c85be ("mmc: sdhci-iproc: Add support for emmc2 of the BCM2711") Signed-off-by: Nicolas Saenz Julienne nsaenz@kernel.org Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1628334401-6577-5-git-send-email-stefan.wahren@i2s... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/sdhci-iproc.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c index ddeaf8e1f72f..b9eb2ec61a83 100644 --- a/drivers/mmc/host/sdhci-iproc.c +++ b/drivers/mmc/host/sdhci-iproc.c @@ -173,6 +173,23 @@ static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host) return pltfm_host->clock; }
+/* + * There is a known bug on BCM2711's SDHCI core integration where the + * controller will hang when the difference between the core clock and the bus + * clock is too great. Specifically this can be reproduced under the following + * conditions: + * + * - No SD card plugged in, polling thread is running, probing cards at + * 100 kHz. + * - BCM2711's core clock configured at 500MHz or more + * + * So we set 200kHz as the minimum clock frequency available for that SoC. + */ +static unsigned int sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host *host) +{ + return 200000; +} + static const struct sdhci_ops sdhci_iproc_ops = { .set_clock = sdhci_set_clock, .get_max_clock = sdhci_iproc_get_max_clock, @@ -271,6 +288,7 @@ static const struct sdhci_ops sdhci_iproc_bcm2711_ops = { .set_clock = sdhci_set_clock, .set_power = sdhci_set_power_and_bus_voltage, .get_max_clock = sdhci_iproc_get_max_clock, + .get_min_clock = sdhci_iproc_bcm2711_get_min_clock, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling,