6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenchao Chen wenchao.chen@unisoc.com
commit 477865af60b2117ceaa1d558e03559108c15c78c upstream.
With cat regulator_summary, we found that vqmmc was not shutting down after the card was pulled.
cat /sys/kernel/debug/regulator/regulator_summary 1.before fix 1)Insert SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV
2)Pull out the SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV
2.after fix 1)Insert SD cardt vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV
2)Pull out the SD card vddsdio 0 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 0 0mA 3500mV 3600mV
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Wenchao Chen wenchao.chen@unisoc.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231115083406.7368-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/host/sdhci-sprd.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
--- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -416,12 +416,33 @@ static void sdhci_sprd_request_done(stru mmc_request_done(host->mmc, mrq); }
+static void sdhci_sprd_set_power(struct sdhci_host *host, unsigned char mode, + unsigned short vdd) +{ + struct mmc_host *mmc = host->mmc; + + switch (mode) { + case MMC_POWER_OFF: + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0); + + mmc_regulator_disable_vqmmc(mmc); + break; + case MMC_POWER_ON: + mmc_regulator_enable_vqmmc(mmc); + break; + case MMC_POWER_UP: + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd); + break; + } +} + static struct sdhci_ops sdhci_sprd_ops = { .read_l = sdhci_sprd_readl, .write_l = sdhci_sprd_writel, .write_w = sdhci_sprd_writew, .write_b = sdhci_sprd_writeb, .set_clock = sdhci_sprd_set_clock, + .set_power = sdhci_sprd_set_power, .get_max_clock = sdhci_sprd_get_max_clock, .get_min_clock = sdhci_sprd_get_min_clock, .set_bus_width = sdhci_set_bus_width, @@ -823,6 +844,10 @@ static int sdhci_sprd_probe(struct platf host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_DDR50);
+ ret = mmc_regulator_get_supply(host->mmc); + if (ret) + goto pm_runtime_disable; + ret = sdhci_setup_host(host); if (ret) goto pm_runtime_disable;