Dear Manish,
Am 17.12.21 um 17:55 schrieb Manish Chopra:
This new firmware addresses few important issues and enhancements as mentioned below -
- Support direct invalidation of FP HSI Ver per function ID, required for invalidating FP HSI Ver prior to each VF start, as there is no VF start
- BRB hardware block parity error detection support for the driver
- Fix the FCOE underrun flow
- Fix PSOD during FCoE BFS over the NIC ports after preboot driver
- Maintains backward compatibility
This patch incorporates this new firmware 7.13.21.0 in bnx2x driver.
Signed-off-by: Manish Chopra manishc@marvell.com Signed-off-by: Prabhakar Kushwaha pkushwaha@marvell.com Signed-off-by: Alok Prasad palok@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com
v1->v2:
- Modified the patch such that driver to be backward compatible with older firmware too (New fw v7.13.21.0 on linux-firmware.git enables driver to maintain backward compatibility)
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 11 +++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 6 +- .../net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h | 2 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 3 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 75 +++++++++++++++------- 5 files changed, 69 insertions(+), 28 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 2b06d78b..a19dd67 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1850,6 +1850,14 @@ struct bnx2x { /* Vxlan/Geneve related information */ u16 udp_tunnel_ports[BNX2X_UDP_PORT_MAX];
+#define FW_CAP_INVALIDATE_VF_FP_HSI BIT(0)
- u32 fw_cap;
- u32 fw_major;
- u32 fw_minor;
- u32 fw_rev;
- u32 fw_eng; };
/* Tx queues may be less or equal to Rx queues */ @@ -2525,5 +2533,6 @@ enum {
- Meant for implicit re-load flows.
*/ int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp);
+int bnx2x_init_firmware(struct bnx2x *bp); +void bnx2x_release_firmware(struct bnx2x *bp); #endif /* bnx2x.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 54a2334..8d36ebb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2365,10 +2365,8 @@ int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err) if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP && load_code != FW_MSG_CODE_DRV_LOAD_COMMON) { /* build my FW version dword */
u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) +(BCM_5710_FW_MINOR_VERSION << 8) +(BCM_5710_FW_REVISION_VERSION << 16) +(BCM_5710_FW_ENGINEERING_VERSION << 24);
u32 my_fw = (bp->fw_major) + (bp->fw_minor << 8) +(bp->fw_rev << 16) + (bp->fw_eng << 24);/* read loaded FW from chip */ u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h index 3f84352..a84d015 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h @@ -241,6 +241,8 @@ IRO[221].m2)) #define XSTORM_VF_TO_PF_OFFSET(funcId) \ (IRO[48].base + ((funcId) * IRO[48].m1)) +#define XSTORM_ETH_FUNCTION_INFO_FP_HSI_VALID_E2_OFFSET(fid) \
- (IRO[386].base + ((fid) * IRO[386].m1)) #define COMMON_ASM_INVALID_ASSERT_OPCODE 0x0
/* eth hsi version */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 622fadc..611efee 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -3024,7 +3024,8 @@ struct afex_stats { #define BCM_5710_FW_MAJOR_VERSION 7 #define BCM_5710_FW_MINOR_VERSION 13 -#define BCM_5710_FW_REVISION_VERSION 15 +#define BCM_5710_FW_REVISION_VERSION 21 +#define BCM_5710_FW_REVISION_VERSION_V15 15 #define BCM_5710_FW_ENGINEERING_VERSION 0 #define BCM_5710_FW_COMPILE_FLAGS 1 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index aec666e..125dafe 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -74,9 +74,19 @@ __stringify(BCM_5710_FW_MINOR_VERSION) "." \ __stringify(BCM_5710_FW_REVISION_VERSION) "." \ __stringify(BCM_5710_FW_ENGINEERING_VERSION)
+#define FW_FILE_VERSION_V15 \
- __stringify(BCM_5710_FW_MAJOR_VERSION) "." \
- __stringify(BCM_5710_FW_MINOR_VERSION) "." \
- __stringify(BCM_5710_FW_REVISION_VERSION_V15) "." \
- __stringify(BCM_5710_FW_ENGINEERING_VERSION)
- #define FW_FILE_NAME_E1 "bnx2x/bnx2x-e1-" FW_FILE_VERSION ".fw" #define FW_FILE_NAME_E1H "bnx2x/bnx2x-e1h-" FW_FILE_VERSION ".fw" #define FW_FILE_NAME_E2 "bnx2x/bnx2x-e2-" FW_FILE_VERSION ".fw"
+#define FW_FILE_NAME_E1_V15 "bnx2x/bnx2x-e1-" FW_FILE_VERSION_V15 ".fw" +#define FW_FILE_NAME_E1H_V15 "bnx2x/bnx2x-e1h-" FW_FILE_VERSION_V15 ".fw" +#define FW_FILE_NAME_E2_V15 "bnx2x/bnx2x-e2-" FW_FILE_VERSION_V15 ".fw" /* Time in jiffies before concluding the transmitter is hung */ #define TX_TIMEOUT (5*HZ) @@ -747,9 +757,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp) CHIP_IS_E1(bp) ? "everest1" : CHIP_IS_E1H(bp) ? "everest1h" : CHIP_IS_E2(bp) ? "everest2" : "everest3",
BCM_5710_FW_MAJOR_VERSION,BCM_5710_FW_MINOR_VERSION,BCM_5710_FW_REVISION_VERSION);
bp->fw_major, bp->fw_minor, bp->fw_rev);return rc; } @@ -12308,6 +12316,15 @@ static int bnx2x_init_bp(struct bnx2x *bp) bnx2x_read_fwinfo(bp);
- if (IS_PF(bp)) {
rc = bnx2x_init_firmware(bp);if (rc) {bnx2x_free_mem_bp(bp);return rc;}- }
- func = BP_FUNC(bp);
/* need to reset chip if undi was active */ @@ -12320,6 +12337,7 @@ static int bnx2x_init_bp(struct bnx2x *bp) rc = bnx2x_prev_unload(bp); if (rc) {
bnx2x_release_firmware(bp); bnx2x_free_mem_bp(bp); return rc;@@ -13317,16 +13335,11 @@ static int bnx2x_check_firmware(struct bnx2x *bp) /* Check FW version */ offset = be32_to_cpu(fw_hdr->fw_version.offset); fw_ver = firmware->data + offset;
- if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) ||
(fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||(fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||(fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
- if (fw_ver[0] != bp->fw_major || fw_ver[1] != bp->fw_minor ||
fw_ver[2] != bp->fw_rev || fw_ver[3] != bp->fw_eng) {
fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3],BCM_5710_FW_MAJOR_VERSION,BCM_5710_FW_MINOR_VERSION,BCM_5710_FW_REVISION_VERSION,BCM_5710_FW_ENGINEERING_VERSION);
fw_ver[0], fw_ver[1], fw_ver[2], fw_ver[3],bp->fw_major, bp->fw_minor, bp->fw_rev, bp->fw_eng);@@ -13404,34 +13417,51 @@ static void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) (u8 *)bp->arr, len); \ } while (0) -static int bnx2x_init_firmware(struct bnx2x *bp) +int bnx2x_init_firmware(struct bnx2x *bp) {
- const char *fw_file_name;
- const char *fw_file_name, *fw_file_name_v15; struct bnx2x_fw_file_hdr *fw_hdr; int rc;
if (bp->firmware) return 0;
- if (CHIP_IS_E1(bp))
- if (CHIP_IS_E1(bp)) { fw_file_name = FW_FILE_NAME_E1;
- else if (CHIP_IS_E1H(bp))
fw_file_name_v15 = FW_FILE_NAME_E1_V15;- } else if (CHIP_IS_E1H(bp)) { fw_file_name = FW_FILE_NAME_E1H;
- else if (!CHIP_IS_E1x(bp))
fw_file_name_v15 = FW_FILE_NAME_E1H_V15;- } else if (!CHIP_IS_E1x(bp)) { fw_file_name = FW_FILE_NAME_E2;
- else {
fw_file_name_v15 = FW_FILE_NAME_E2_V15;- } else { BNX2X_ERR("Unsupported chip revision\n"); return -EINVAL; }
- BNX2X_DEV_INFO("Loading %s\n", fw_file_name);
rc = request_firmware(&bp->firmware, fw_file_name, &bp->pdev->dev); if (rc) {
BNX2X_ERR("Can't load firmware file %s\n",fw_file_name);goto request_firmware_exit;
BNX2X_DEV_INFO("Trying to load older fw %s\n", fw_file_name_v15);/* try to load prev version */rc = request_firmware(&bp->firmware, fw_file_name_v15, &bp->pdev->dev);if (rc)goto request_firmware_exit;bp->fw_rev = BCM_5710_FW_REVISION_VERSION_V15;- } else {
bp->fw_cap |= FW_CAP_INVALIDATE_VF_FP_HSI;bp->fw_rev = BCM_5710_FW_REVISION_VERSION;
- bp->fw_major = BCM_5710_FW_MAJOR_VERSION;
- bp->fw_minor = BCM_5710_FW_MINOR_VERSION;
- bp->fw_eng = BCM_5710_FW_ENGINEERING_VERSION;
- rc = bnx2x_check_firmware(bp); if (rc) { BNX2X_ERR("Corrupt firmware file %s\n", fw_file_name);
@@ -13487,7 +13517,7 @@ static int bnx2x_init_firmware(struct bnx2x *bp) return rc; } -static void bnx2x_release_firmware(struct bnx2x *bp) +void bnx2x_release_firmware(struct bnx2x *bp) { kfree(bp->init_ops_offsets); kfree(bp->init_ops); @@ -14004,6 +14034,7 @@ static int bnx2x_init_one(struct pci_dev *pdev, return 0; init_one_freemem:
- bnx2x_release_firmware(bp); bnx2x_free_mem_bp(bp);
init_one_exit:
This change was added to Linux in commit b7a49f73059f (bnx2x: Utilize firmware 7.13.21.0) [1] to Linux v5.17-rc1, and backported to the stable series, for example, Linux v5.10.95.
Due to CVE-2022-0847 (Dirty Pipe) [1] we updated systems from, for example, Linux 5.10.24 to Linux v5.10.103 and noticed that the Broadcom network devices failed to initialize.
``` [ 20.477325] bnx2 0000:02:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem c6000000, IRQ 41, node addr c8:1f:66:cf:34:45 [ 20.491782] bnx2 0000:02:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem c8000000, IRQ 42, node addr c8:1f:66:cf:34:47 [ 20.506223] bnx2 0000:03:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem ca000000, IRQ 43, node addr c8:1f:66:cf:34:49 [ 20.520644] bnx2 0000:03:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem cc000000, IRQ 44, node addr c8:1f:66:cf:34:4b [ 20.534985] bnx2x 0000:45:00.0: msix capability found [ 20.540342] bnx2x 0000:45:00.0: part number 394D4342-31373735-31314131-473331 [ 20.548605] bnx2x 0000:45:00.0: Direct firmware load for bnx2x/bnx2x-e1h-7.13.21.0.fw failed with error -2 [ 20.558373] bnx2x 0000:45:00.0: Direct firmware load for bnx2x/bnx2x-e1h-7.13.15.0.fw failed with error -2 [ 20.568319] bnx2x: probe of 0000:45:00.0 failed with error -2 [ 20.574148] bnx2x 0000:45:00.1: msix capability found [ 20.579470] bnx2x 0000:45:00.1: part number 394D4342-31373735-31314131-473331 [ 20.587708] bnx2x 0000:45:00.1: Direct firmware load for bnx2x/bnx2x-e1h-7.13.21.0.fw failed with error -2 [ 20.597479] bnx2x 0000:45:00.1: Direct firmware load for bnx2x/bnx2x-e1h-7.13.15.0.fw failed with error -2 [ 20.607355] bnx2x: probe of 0000:45:00.1 failed with error -2 [ 20.613179] bnx2x 0000:46:00.0: msix capability found [ 20.618501] bnx2x 0000:46:00.0: part number 394D4342-31373735-31314131-473331 [ 20.626805] bnx2x 0000:46:00.0: Direct firmware load for bnx2x/bnx2x-e1h-7.13.21.0.fw failed with error -2 [ 20.636580] bnx2x 0000:46:00.0: Direct firmware load for bnx2x/bnx2x-e1h-7.13.15.0.fw failed with error -2 [ 20.646453] bnx2x: probe of 0000:46:00.0 failed with error -2 [ 20.652279] bnx2x 0000:46:00.1: msix capability found [ 20.657593] bnx2x 0000:46:00.1: part number 394D4342-31373735-31314131-473331 [ 20.665813] bnx2x 0000:46:00.1: Direct firmware load for bnx2x/bnx2x-e1h-7.13.21.0.fw failed with error -2 [ 20.675590] bnx2x 0000:46:00.1: Direct firmware load for bnx2x/bnx2x-e1h-7.13.15.0.fw failed with error -2 [ 20.685457] bnx2x: probe of 0000:46:00.1 failed with error -2 ```
Due to reasons, we do not have firmware in the initrd, and the firmware files are only the root partition in `/lib/firmware`.
Logging in using other means¹, and removing the PCI devices, and rescanning brought the devices online.
$ echo 1 | sudo tee /sys/bus/pci/devices/0000:{45,46}:00.{0,1}/remove $ echo 1 | sudo tee /sys/bus/pci/rescan
Adding the firmware files to the initrd also fixes the issue.
I didn’t bisect the change, but the refactoring of the init methods looks like the reason for the change of behavior. As it’s not documented in the commit message, was that intentional? I think it breaks Linux’ no regression rule, and the commit (and follow-ups) should be reverted in Linux v5.17 and backed out from the stable series.
Kind regards,
Paul
¹ Why can’t even without proper firmware, the card at least initialize to have a network connection even if it’s degraded?