From: Christian Eggers ceggers@arri.de
commit aa9e862d7d5bcecd4dca9f39e8b684b93dd84ee7 upstream.
Simply copying all xfers from userspace into one bounce buffer causes alignment problems if the SPI controller uses DMA.
Ensure that all transfer data blocks within the rx and tx bounce buffers are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).
Alignment may increase the usage of the bounce buffers. In some cases, the buffers may need to be increased using the "bufsiz" module parameter.
Signed-off-by: Christian Eggers ceggers@arri.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/spi/spidev.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
--- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -223,6 +223,11 @@ static int spidev_message(struct spidev_ for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers; n; n--, k_tmp++, u_tmp++) { + /* Ensure that also following allocations from rx_buf/tx_buf will meet + * DMA alignment requirements. + */ + unsigned int len_aligned = ALIGN(u_tmp->len, ARCH_KMALLOC_MINALIGN); + k_tmp->len = u_tmp->len;
total += k_tmp->len; @@ -238,17 +243,17 @@ static int spidev_message(struct spidev_
if (u_tmp->rx_buf) { /* this transfer needs space in RX bounce buffer */ - rx_total += k_tmp->len; + rx_total += len_aligned; if (rx_total > bufsiz) { status = -EMSGSIZE; goto done; } k_tmp->rx_buf = rx_buf; - rx_buf += k_tmp->len; + rx_buf += len_aligned; } if (u_tmp->tx_buf) { /* this transfer needs space in TX bounce buffer */ - tx_total += k_tmp->len; + tx_total += len_aligned; if (tx_total > bufsiz) { status = -EMSGSIZE; goto done; @@ -258,7 +263,7 @@ static int spidev_message(struct spidev_ (uintptr_t) u_tmp->tx_buf, u_tmp->len)) goto done; - tx_buf += k_tmp->len; + tx_buf += len_aligned; }
k_tmp->cs_change = !!u_tmp->cs_change; @@ -292,16 +297,16 @@ static int spidev_message(struct spidev_ goto done;
/* copy any rx data out of bounce buffer */ - rx_buf = spidev->rx_buffer; - for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) { + for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers; + n; + n--, k_tmp++, u_tmp++) { if (u_tmp->rx_buf) { if (copy_to_user((u8 __user *) - (uintptr_t) u_tmp->rx_buf, rx_buf, + (uintptr_t) u_tmp->rx_buf, k_tmp->rx_buf, u_tmp->len)) { status = -EFAULT; goto done; } - rx_buf += u_tmp->len; } } status = total;