From: Alan Stern stern@rowland.harvard.edu
commit 9f952e26295d977dbfc6fedeaf8c4f112c818d37 upstream.
Commit 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume") wasn't very well conceived. The problem it tried to fix was that if a connect-change event occurred while the system was asleep (such as a device disconnecting itself from the bus when it is suspended and then reconnecting when it resumes) requiring a reset-resume during the system wakeup transition, the hub port's change_bit entry would remain set afterward. This would cause the hub driver to believe another connect-change event had occurred after the reset-resume, which was wrong and would lead the driver to send unnecessary requests to the device (which could interfere with a firmware update).
The commit tried to fix this by not setting the change_bit during the wakeup. But this was the wrong thing to do; it means that when a device is unplugged while the system is asleep, the hub driver doesn't realize anything has happened: The change_bit flag which would tell it to handle the disconnect event is clear.
The commit needs to be reverted and the problem fixed in a different way. Fortunately an alternative solution was noted in the commit's Changelog: We can continue to set the change_bit entry in hub_activate() but then clear it when a reset-resume occurs. That way the the hub driver will see the change_bit when a device is disconnected but won't see it when the device is still present.
That's what this patch does.
Reported-and-tested-by: Peter Chen peter.chen@nxp.com Signed-off-by: Alan Stern stern@rowland.harvard.edu Fixes: 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume") Tested-by: Paul Zimmerman pauldzim@gmail.com CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2004221602480.11262-100000@iolanth... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/core/hub.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
--- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1175,6 +1175,11 @@ static void hub_activate(struct usb_hub #ifdef CONFIG_PM udev->reset_resume = 1; #endif + /* Don't set the change_bits when the device + * was powered off. + */ + if (test_bit(port1, hub->power_bits)) + set_bit(port1, hub->change_bits);
} else { /* The power session is gone; tell hub_wq */ @@ -2939,6 +2944,15 @@ static int check_port_resume_type(struct if (portchange & USB_PORT_STAT_C_ENABLE) usb_clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); + + /* + * Whatever made this reset-resume necessary may have + * turned on the port1 bit in hub->change_bits. But after + * a successful reset-resume we want the bit to be clear; + * if it was on it would indicate that something happened + * following the reset-resume. + */ + clear_bit(port1, hub->change_bits); }
return status;