6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wenkai Lin linwenkai6@hisilicon.com
[ Upstream commit a49cc71e219040d771a8c1254879984f98192811 ]
The hardware only supports authentication sizes that are 4-byte aligned. Therefore, the driver switches to software computation in this case.
Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2") Signed-off-by: Wenkai Lin linwenkai6@hisilicon.com Signed-off-by: Chenghai Huang huangchenghai2@huawei.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/hisilicon/sec2/sec_crypto.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c index a9b1b9b0b03bf..ff9ad7f02cefe 100644 --- a/drivers/crypto/hisilicon/sec2/sec_crypto.c +++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c @@ -57,7 +57,6 @@ #define SEC_TYPE_MASK 0x0F #define SEC_DONE_MASK 0x0001 #define SEC_ICV_MASK 0x000E -#define SEC_SQE_LEN_RATE_MASK 0x3
#define SEC_TOTAL_IV_SZ(depth) (SEC_IV_SIZE * (depth)) #define SEC_SGL_SGE_NR 128 @@ -80,16 +79,16 @@ #define SEC_TOTAL_PBUF_SZ(depth) (PAGE_SIZE * SEC_PBUF_PAGE_NUM(depth) + \ SEC_PBUF_LEFT_SZ(depth))
-#define SEC_SQE_LEN_RATE 4 #define SEC_SQE_CFLAG 2 #define SEC_SQE_AEAD_FLAG 3 #define SEC_SQE_DONE 0x1 #define SEC_ICV_ERR 0x2 -#define MIN_MAC_LEN 4 #define MAC_LEN_MASK 0x1U #define MAX_INPUT_DATA_LEN 0xFFFE00 #define BITS_MASK 0xFF +#define WORD_MASK 0x3 #define BYTE_BITS 0x8 +#define BYTES_TO_WORDS(bcount) ((bcount) >> 2) #define SEC_XTS_NAME_SZ 0x3 #define IV_CM_CAL_NUM 2 #define IV_CL_MASK 0x7 @@ -1175,7 +1174,7 @@ static int sec_aead_setkey(struct crypto_aead *tfm, const u8 *key, goto bad_key; }
- if (ctx->a_ctx.a_key_len & SEC_SQE_LEN_RATE_MASK) { + if (ctx->a_ctx.a_key_len & WORD_MASK) { ret = -EINVAL; dev_err(dev, "AUTH key length error!\n"); goto bad_key; @@ -1583,11 +1582,10 @@ static void sec_auth_bd_fill_ex(struct sec_auth_ctx *ctx, int dir,
sec_sqe->type2.a_key_addr = cpu_to_le64(ctx->a_key_dma);
- sec_sqe->type2.mac_key_alg = cpu_to_le32(authsize / SEC_SQE_LEN_RATE); + sec_sqe->type2.mac_key_alg = cpu_to_le32(BYTES_TO_WORDS(authsize));
sec_sqe->type2.mac_key_alg |= - cpu_to_le32((u32)((ctx->a_key_len) / - SEC_SQE_LEN_RATE) << SEC_AKEY_OFFSET); + cpu_to_le32((u32)BYTES_TO_WORDS(ctx->a_key_len) << SEC_AKEY_OFFSET);
sec_sqe->type2.mac_key_alg |= cpu_to_le32((u32)(ctx->a_alg) << SEC_AEAD_ALG_OFFSET); @@ -1639,12 +1637,10 @@ static void sec_auth_bd_fill_ex_v3(struct sec_auth_ctx *ctx, int dir, sqe3->a_key_addr = cpu_to_le64(ctx->a_key_dma);
sqe3->auth_mac_key |= - cpu_to_le32((u32)(authsize / - SEC_SQE_LEN_RATE) << SEC_MAC_OFFSET_V3); + cpu_to_le32(BYTES_TO_WORDS(authsize) << SEC_MAC_OFFSET_V3);
sqe3->auth_mac_key |= - cpu_to_le32((u32)(ctx->a_key_len / - SEC_SQE_LEN_RATE) << SEC_AKEY_OFFSET_V3); + cpu_to_le32((u32)BYTES_TO_WORDS(ctx->a_key_len) << SEC_AKEY_OFFSET_V3);
sqe3->auth_mac_key |= cpu_to_le32((u32)(ctx->a_alg) << SEC_AUTH_ALG_OFFSET_V3); @@ -2234,8 +2230,8 @@ static int sec_aead_spec_check(struct sec_ctx *ctx, struct sec_req *sreq) struct device *dev = ctx->dev; int ret;
- /* Hardware does not handle cases where authsize is less than 4 bytes */ - if (unlikely(sz < MIN_MAC_LEN)) { + /* Hardware does not handle cases where authsize is not 4 bytes aligned */ + if (c_mode == SEC_CMODE_CBC && (sz & WORD_MASK)) { sreq->aead_req.fallback = true; return -EINVAL; }