From: Ben Wolsieffer ben.wolsieffer@hefring.com
[ Upstream commit dbd7c0088b7f44aa0b9276ed3449df075a7b5b54 ]
The driver never sets a default timeout value, therefore it is initialized to zero. When CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is enabled, the watchdog is started during probe. The kernel is supposed to automatically ping the watchdog from this point until userspace takes over, but this does not happen if the configured timeout is zero. A zero timeout causes watchdog_need_worker() to return false, so the heartbeat worker does not run and the system therefore resets soon after the driver is probed.
This patch fixes this by setting an arbitrary non-zero default timeout. The default could be read from the hardware instead, but I didn't see any reason to add this complexity.
This has been tested on an STM32F746.
Fixes: 85fdc63fe256 ("drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe") Signed-off-by: Ben Wolsieffer ben.wolsieffer@hefring.com Reviewed-by: Guenter Roeck linux@roeck-us.net Link: https://lore.kernel.org/r/20240228182723.12855-1-ben.wolsieffer@hefring.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@linux-watchdog.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/watchdog/stm32_iwdg.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c index 570a71509d2a9..78d51deab87aa 100644 --- a/drivers/watchdog/stm32_iwdg.c +++ b/drivers/watchdog/stm32_iwdg.c @@ -21,6 +21,8 @@ #include <linux/platform_device.h> #include <linux/watchdog.h>
+#define DEFAULT_TIMEOUT 10 + /* IWDG registers */ #define IWDG_KR 0x00 /* Key register */ #define IWDG_PR 0x04 /* Prescaler Register */ @@ -249,6 +251,7 @@ static int stm32_iwdg_probe(struct platform_device *pdev) wdd->parent = dev; wdd->info = &stm32_iwdg_info; wdd->ops = &stm32_iwdg_ops; + wdd->timeout = DEFAULT_TIMEOUT; wdd->min_timeout = DIV_ROUND_UP((RLR_MIN + 1) * PR_MIN, wdt->rate); wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * wdt->data->max_prescaler * 1000) / wdt->rate;