From: Mathieu Dubois-Briand mathieu.dubois-briand@bootlin.com
[ Upstream commit 553b75d4bfe9264f631d459fe9996744e0672b0e ]
GPIO controller often have support for IRQ: allow to easily allocate both gpio-regmap and regmap-irq in one operation.
Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Acked-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Mathieu Dubois-Briand mathieu.dubois-briand@bootlin.com Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-5-435cfda2b1ea@bo... Signed-off-by: Lee Jones lee@kernel.org Stable-dep-of: 2ba5772e530f ("gpio: idio-16: Define fixed direction of the GPIO lines") Signed-off-by: William Breathitt Gray wbg@kernel.org --- drivers/gpio/gpio-regmap.c | 29 +++++++++++++++++++++++++++-- include/linux/gpio/regmap.h | 11 +++++++++++ 2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c index c08c8e528867..c789001241fd 100644 --- a/drivers/gpio/gpio-regmap.c +++ b/drivers/gpio/gpio-regmap.c @@ -30,6 +30,11 @@ struct gpio_regmap { unsigned int reg_dir_in_base; unsigned int reg_dir_out_base;
+#ifdef CONFIG_REGMAP_IRQ + int regmap_irq_line; + struct regmap_irq_chip_data *irq_chip_data; +#endif + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base, unsigned int offset, unsigned int *reg, unsigned int *mask); @@ -203,6 +208,7 @@ EXPORT_SYMBOL_GPL(gpio_regmap_get_drvdata); */ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config) { + struct irq_domain *irq_domain; struct gpio_regmap *gpio; struct gpio_chip *chip; int ret; @@ -278,8 +284,22 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config if (ret < 0) goto err_free_gpio;
- if (config->irq_domain) { - ret = gpiochip_irqchip_add_domain(chip, config->irq_domain); +#ifdef CONFIG_REGMAP_IRQ + if (config->regmap_irq_chip) { + gpio->regmap_irq_line = config->regmap_irq_line; + ret = regmap_add_irq_chip_fwnode(dev_fwnode(config->parent), config->regmap, + config->regmap_irq_line, config->regmap_irq_flags, + 0, config->regmap_irq_chip, &gpio->irq_chip_data); + if (ret) + goto err_free_gpio; + + irq_domain = regmap_irq_get_domain(gpio->irq_chip_data); + } else +#endif + irq_domain = config->irq_domain; + + if (irq_domain) { + ret = gpiochip_irqchip_add_domain(chip, irq_domain); if (ret) goto err_remove_gpiochip; } @@ -300,6 +320,11 @@ EXPORT_SYMBOL_GPL(gpio_regmap_register); */ void gpio_regmap_unregister(struct gpio_regmap *gpio) { +#ifdef CONFIG_REGMAP_IRQ + if (gpio->irq_chip_data) + regmap_del_irq_chip(gpio->regmap_irq_line, gpio->irq_chip_data); +#endif + gpiochip_remove(&gpio->gpio_chip); kfree(gpio); } diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h index a9f7b7faf57b..76f6c73106dc 100644 --- a/include/linux/gpio/regmap.h +++ b/include/linux/gpio/regmap.h @@ -40,6 +40,11 @@ struct regmap; * @drvdata: (Optional) Pointer to driver specific data which is * not used by gpio-remap but is provided "as is" to the * driver callback(s). + * @regmap_irq_chip: (Optional) Pointer on an regmap_irq_chip structure. If + * set, a regmap-irq device will be created and the IRQ + * domain will be set accordingly. + * @regmap_irq_line (Optional) The IRQ the device uses to signal interrupts. + * @regmap_irq_flags (Optional) The IRQF_ flags to use for the interrupt. * * The ->reg_mask_xlate translates a given base address and GPIO offset to * register and mask pair. The base address is one of the given register @@ -78,6 +83,12 @@ struct gpio_regmap_config { int ngpio_per_reg; struct irq_domain *irq_domain;
+#ifdef CONFIG_REGMAP_IRQ + struct regmap_irq_chip *regmap_irq_chip; + int regmap_irq_line; + unsigned long regmap_irq_flags; +#endif + int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base, unsigned int offset, unsigned int *reg, unsigned int *mask);