4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hugh Dickins hughd@google.com
Added "nokaiser" boot option: an early param like "noinvpcid". Most places now check int kaiser_enabled (#defined 0 when not CONFIG_KAISER) instead of #ifdef CONFIG_KAISER; but entry_64.S and entry_64_compat.S are using the ALTERNATIVE technique, which patches in the preferred instructions at runtime. That technique is tied to x86 cpu features, so X86_FEATURE_KAISER is fabricated.
Prior to "nokaiser", Kaiser #defined _PAGE_GLOBAL 0: revert that, but be careful with both _PAGE_GLOBAL and CR4.PGE: setting them when nokaiser like when !CONFIG_KAISER, but not setting either when kaiser - neither matters on its own, but it's hard to be sure that _PAGE_GLOBAL won't get set in some obscure corner, or something add PGE into CR4. By omitting _PAGE_GLOBAL from __supported_pte_mask when kaiser_enabled, all page table setup which uses pte_pfn() masks it out of the ptes.
It's slightly shameful that the same declaration versus definition of kaiser_enabled appears in not one, not two, but in three header files (asm/kaiser.h, asm/pgtable.h, asm/tlbflush.h). I felt safer that way, than with #including any of those in any of the others; and did not feel it worth an asm/kaiser_enabled.h - kernel/cpu/common.c includes them all, so we shall hear about it if they get out of synch.
Cleanups while in the area: removed the silly #ifdef CONFIG_KAISER from kaiser.c; removed the unused native_get_normal_pgd(); removed the spurious reg clutter from SWITCH_*_CR3 macro stubs; corrected some comments. But more interestingly, set CR4.PSE in secondary_startup_64: the manual is clear that it does not matter whether it's 0 or 1 when 4-level-pts are enabled, but I was distracted to find cr4 different on BSP and auxiliaries - BSP alone was adding PSE, in probe_page_size_mask().
Signed-off-by: Hugh Dickins hughd@google.com Acked-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/kernel-parameters.txt | 2 + arch/x86/entry/entry_64.S | 15 +++++++------ arch/x86/include/asm/cpufeature.h | 3 ++ arch/x86/include/asm/kaiser.h | 27 +++++++++++++++++------- arch/x86/include/asm/pgtable.h | 20 ++++++++++++----- arch/x86/include/asm/pgtable_64.h | 13 +++-------- arch/x86/include/asm/pgtable_types.h | 4 --- arch/x86/include/asm/tlbflush.h | 39 ++++++++++++++++++++++------------- arch/x86/kernel/cpu/common.c | 28 ++++++++++++++++++++++++- arch/x86/kernel/espfix_64.c | 3 +- arch/x86/kernel/head_64.S | 4 +-- arch/x86/mm/init.c | 2 - arch/x86/mm/init_64.c | 10 ++++++++ arch/x86/mm/kaiser.c | 26 +++++++++++++++++++---- arch/x86/mm/pgtable.c | 8 +------ arch/x86/mm/tlb.c | 4 --- 16 files changed, 143 insertions(+), 65 deletions(-)
--- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2523,6 +2523,8 @@ bytes respectively. Such letter suffixes
nojitter [IA-64] Disables jitter checking for ITC timers.
+ nokaiser [X86-64] Disable KAISER isolation of kernel from user. + no-kvmclock [X86,KVM] Disable paravirtualized KVM clock driver
no-kvmapf [X86,KVM] Disable paravirtualized asynchronous page --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -1051,7 +1051,7 @@ ENTRY(paranoid_entry) * unconditionally, but we need to find out whether the reverse * should be done on return (conveyed to paranoid_exit in %ebx). */ - movq %cr3, %rax + ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER testl $KAISER_SHADOW_PGD_OFFSET, %eax jz 2f orl $2, %ebx @@ -1083,6 +1083,7 @@ ENTRY(paranoid_exit) TRACE_IRQS_OFF_DEBUG TRACE_IRQS_IRETQ_DEBUG #ifdef CONFIG_KAISER + /* No ALTERNATIVE for X86_FEATURE_KAISER: paranoid_entry sets %ebx */ testl $2, %ebx /* SWITCH_USER_CR3 needed? */ jz paranoid_exit_no_switch SWITCH_USER_CR3 @@ -1315,13 +1316,14 @@ ENTRY(nmi) #ifdef CONFIG_KAISER /* Unconditionally use kernel CR3 for do_nmi() */ /* %rax is saved above, so OK to clobber here */ - movq %cr3, %rax + ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER /* If PCID enabled, NOFLUSH now and NOFLUSH on return */ orq x86_cr3_pcid_noflush, %rax pushq %rax /* mask off "user" bit of pgd address and 12 PCID bits: */ andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax movq %rax, %cr3 +2: #endif call do_nmi
@@ -1331,8 +1333,7 @@ ENTRY(nmi) * kernel code that needs user CR3, but do we ever return * to "user mode" where we need the kernel CR3? */ - popq %rax - mov %rax, %cr3 + ALTERNATIVE "", "popq %rax; movq %rax, %cr3", X86_FEATURE_KAISER #endif
/* @@ -1559,13 +1560,14 @@ end_repeat_nmi: #ifdef CONFIG_KAISER /* Unconditionally use kernel CR3 for do_nmi() */ /* %rax is saved above, so OK to clobber here */ - movq %cr3, %rax + ALTERNATIVE "jmp 2f", "movq %cr3, %rax", X86_FEATURE_KAISER /* If PCID enabled, NOFLUSH now and NOFLUSH on return */ orq x86_cr3_pcid_noflush, %rax pushq %rax /* mask off "user" bit of pgd address and 12 PCID bits: */ andq $(~(X86_CR3_PCID_ASID_MASK | KAISER_SHADOW_PGD_OFFSET)), %rax movq %rax, %cr3 +2: #endif
/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ @@ -1577,8 +1579,7 @@ end_repeat_nmi: * kernel code that needs user CR3, like just just before * a sysret. */ - popq %rax - mov %rax, %cr3 + ALTERNATIVE "", "popq %rax; movq %rax, %cr3", X86_FEATURE_KAISER #endif
testl %ebx, %ebx /* swapgs needed? */ --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -200,6 +200,9 @@ #define X86_FEATURE_HWP_PKG_REQ ( 7*32+14) /* Intel HWP_PKG_REQ */ #define X86_FEATURE_INTEL_PT ( 7*32+15) /* Intel Processor Trace */
+/* Because the ALTERNATIVE scheme is for members of the X86_FEATURE club... */ +#define X86_FEATURE_KAISER ( 7*32+31) /* CONFIG_KAISER w/o nokaiser */ + /* Virtualization flags: Linux defined, word 8 */ #define X86_FEATURE_TPR_SHADOW ( 8*32+ 0) /* Intel TPR Shadow */ #define X86_FEATURE_VNMI ( 8*32+ 1) /* Intel Virtual NMI */ --- a/arch/x86/include/asm/kaiser.h +++ b/arch/x86/include/asm/kaiser.h @@ -46,28 +46,33 @@ movq \reg, %cr3 .endm
.macro SWITCH_KERNEL_CR3 -pushq %rax +ALTERNATIVE "jmp 8f", "pushq %rax", X86_FEATURE_KAISER _SWITCH_TO_KERNEL_CR3 %rax popq %rax +8: .endm
.macro SWITCH_USER_CR3 -pushq %rax +ALTERNATIVE "jmp 8f", "pushq %rax", X86_FEATURE_KAISER _SWITCH_TO_USER_CR3 %rax %al popq %rax +8: .endm
.macro SWITCH_KERNEL_CR3_NO_STACK -movq %rax, PER_CPU_VAR(unsafe_stack_register_backup) +ALTERNATIVE "jmp 8f", \ + __stringify(movq %rax, PER_CPU_VAR(unsafe_stack_register_backup)), \ + X86_FEATURE_KAISER _SWITCH_TO_KERNEL_CR3 %rax movq PER_CPU_VAR(unsafe_stack_register_backup), %rax +8: .endm
#else /* CONFIG_KAISER */
-.macro SWITCH_KERNEL_CR3 reg +.macro SWITCH_KERNEL_CR3 .endm -.macro SWITCH_USER_CR3 reg regb +.macro SWITCH_USER_CR3 .endm .macro SWITCH_KERNEL_CR3_NO_STACK .endm @@ -90,6 +95,16 @@ DECLARE_PER_CPU(unsigned long, x86_cr3_p
extern char __per_cpu_user_mapped_start[], __per_cpu_user_mapped_end[];
+extern int kaiser_enabled; +#else +#define kaiser_enabled 0 +#endif /* CONFIG_KAISER */ + +/* + * Kaiser function prototypes are needed even when CONFIG_KAISER is not set, + * so as to build with tests on kaiser_enabled instead of #ifdefs. + */ + /** * kaiser_add_mapping - map a virtual memory part to the shadow (user) mapping * @addr: the start address of the range @@ -119,8 +134,6 @@ extern void kaiser_remove_mapping(unsign */ extern void kaiser_init(void);
-#endif /* CONFIG_KAISER */ - #endif /* __ASSEMBLY */
#endif /* _ASM_X86_KAISER_H */ --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -18,6 +18,12 @@ #ifndef __ASSEMBLY__ #include <asm/x86_init.h>
+#ifdef CONFIG_KAISER +extern int kaiser_enabled; +#else +#define kaiser_enabled 0 +#endif + void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd); void ptdump_walk_pgd_level_checkwx(void);
@@ -660,7 +666,7 @@ static inline int pgd_bad(pgd_t pgd) * page table by accident; it will fault on the first * instruction it tries to run. See native_set_pgd(). */ - if (IS_ENABLED(CONFIG_KAISER)) + if (kaiser_enabled) ignore_flags |= _PAGE_NX;
return (pgd_flags(pgd) & ~ignore_flags) != _KERNPG_TABLE; @@ -865,12 +871,14 @@ static inline void pmdp_set_wrprotect(st */ static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count) { - memcpy(dst, src, count * sizeof(pgd_t)); + memcpy(dst, src, count * sizeof(pgd_t)); #ifdef CONFIG_KAISER - /* Clone the shadow pgd part as well */ - memcpy(native_get_shadow_pgd(dst), - native_get_shadow_pgd(src), - count * sizeof(pgd_t)); + if (kaiser_enabled) { + /* Clone the shadow pgd part as well */ + memcpy(native_get_shadow_pgd(dst), + native_get_shadow_pgd(src), + count * sizeof(pgd_t)); + } #endif }
--- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -111,13 +111,12 @@ extern pgd_t kaiser_set_shadow_pgd(pgd_t
static inline pgd_t *native_get_shadow_pgd(pgd_t *pgdp) { +#ifdef CONFIG_DEBUG_VM + /* linux/mmdebug.h may not have been included at this point */ + BUG_ON(!kaiser_enabled); +#endif return (pgd_t *)((unsigned long)pgdp | (unsigned long)PAGE_SIZE); } - -static inline pgd_t *native_get_normal_pgd(pgd_t *pgdp) -{ - return (pgd_t *)((unsigned long)pgdp & ~(unsigned long)PAGE_SIZE); -} #else static inline pgd_t kaiser_set_shadow_pgd(pgd_t *pgdp, pgd_t pgd) { @@ -128,10 +127,6 @@ static inline pgd_t *native_get_shadow_p BUILD_BUG_ON(1); return NULL; } -static inline pgd_t *native_get_normal_pgd(pgd_t *pgdp) -{ - return pgdp; -} #endif /* CONFIG_KAISER */
static inline void native_set_pgd(pgd_t *pgdp, pgd_t pgd) --- a/arch/x86/include/asm/pgtable_types.h +++ b/arch/x86/include/asm/pgtable_types.h @@ -39,11 +39,7 @@ #define _PAGE_ACCESSED (_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED) #define _PAGE_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_DIRTY) #define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE) -#ifdef CONFIG_KAISER -#define _PAGE_GLOBAL (_AT(pteval_t, 0)) -#else #define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL) -#endif #define _PAGE_SOFTW1 (_AT(pteval_t, 1) << _PAGE_BIT_SOFTW1) #define _PAGE_SOFTW2 (_AT(pteval_t, 1) << _PAGE_BIT_SOFTW2) #define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT) --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -136,9 +136,11 @@ static inline void cr4_set_bits_and_upda * to avoid the need for asm/kaiser.h in unexpected places. */ #ifdef CONFIG_KAISER +extern int kaiser_enabled; extern void kaiser_setup_pcid(void); extern void kaiser_flush_tlb_on_return_to_user(void); #else +#define kaiser_enabled 0 static inline void kaiser_setup_pcid(void) { } @@ -163,7 +165,7 @@ static inline void __native_flush_tlb(vo * back: */ preempt_disable(); - if (this_cpu_has(X86_FEATURE_PCID)) + if (kaiser_enabled && this_cpu_has(X86_FEATURE_PCID)) kaiser_flush_tlb_on_return_to_user(); native_write_cr3(native_read_cr3()); preempt_enable(); @@ -174,20 +176,30 @@ static inline void __native_flush_tlb_gl unsigned long cr4;
cr4 = this_cpu_read(cpu_tlbstate.cr4); - /* clear PGE */ - native_write_cr4(cr4 & ~X86_CR4_PGE); - /* write old PGE again and flush TLBs */ - native_write_cr4(cr4); + if (cr4 & X86_CR4_PGE) { + /* clear PGE and flush TLB of all entries */ + native_write_cr4(cr4 & ~X86_CR4_PGE); + /* restore PGE as it was before */ + native_write_cr4(cr4); + } else { + /* + * x86_64 microcode update comes this way when CR4.PGE is not + * enabled, and it's safer for all callers to allow this case. + */ + native_write_cr3(native_read_cr3()); + } }
static inline void __native_flush_tlb_global(void) { -#ifdef CONFIG_KAISER - /* Globals are not used at all */ - __native_flush_tlb(); -#else unsigned long flags;
+ if (kaiser_enabled) { + /* Globals are not used at all */ + __native_flush_tlb(); + return; + } + if (this_cpu_has(X86_FEATURE_INVPCID)) { /* * Using INVPCID is considerably faster than a pair of writes @@ -207,7 +219,6 @@ static inline void __native_flush_tlb_gl raw_local_irq_save(flags); __native_flush_tlb_global_irq_disabled(); raw_local_irq_restore(flags); -#endif }
static inline void __native_flush_tlb_single(unsigned long addr) @@ -222,7 +233,7 @@ static inline void __native_flush_tlb_si */
if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE)) { - if (this_cpu_has(X86_FEATURE_PCID)) + if (kaiser_enabled && this_cpu_has(X86_FEATURE_PCID)) kaiser_flush_tlb_on_return_to_user(); asm volatile("invlpg (%0)" ::"r" (addr) : "memory"); return; @@ -237,9 +248,9 @@ static inline void __native_flush_tlb_si * Make sure to do only a single invpcid when KAISER is * disabled and we have only a single ASID. */ - if (X86_CR3_PCID_ASID_KERN != X86_CR3_PCID_ASID_USER) - invpcid_flush_one(X86_CR3_PCID_ASID_KERN, addr); - invpcid_flush_one(X86_CR3_PCID_ASID_USER, addr); + if (kaiser_enabled) + invpcid_flush_one(X86_CR3_PCID_ASID_USER, addr); + invpcid_flush_one(X86_CR3_PCID_ASID_KERN, addr); }
static inline void __flush_tlb_all(void) --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -178,6 +178,20 @@ static int __init x86_pcid_setup(char *s return 1; } __setup("nopcid", x86_pcid_setup); + +static int __init x86_nokaiser_setup(char *s) +{ + /* nokaiser doesn't accept parameters */ + if (s) + return -EINVAL; +#ifdef CONFIG_KAISER + kaiser_enabled = 0; + setup_clear_cpu_cap(X86_FEATURE_KAISER); + pr_info("nokaiser: KAISER feature disabled\n"); +#endif + return 0; +} +early_param("nokaiser", x86_nokaiser_setup); #endif
static int __init x86_noinvpcid_setup(char *s) @@ -324,7 +338,7 @@ static __always_inline void setup_smap(s static void setup_pcid(struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_PCID)) { - if (cpu_has(c, X86_FEATURE_PGE)) { + if (cpu_has(c, X86_FEATURE_PGE) || kaiser_enabled) { cr4_set_bits(X86_CR4_PCIDE); /* * INVPCID has two "groups" of types: @@ -747,6 +761,10 @@ void get_cpu_cap(struct cpuinfo_x86 *c) c->x86_power = cpuid_edx(0x80000007);
init_scattered_cpuid_features(c); +#ifdef CONFIG_KAISER + if (kaiser_enabled) + set_cpu_cap(c, X86_FEATURE_KAISER); +#endif }
static void identify_cpu_without_cpuid(struct cpuinfo_x86 *c) @@ -1406,6 +1424,14 @@ void cpu_init(void) * try to read it. */ cr4_init_shadow(); + if (!kaiser_enabled) { + /* + * secondary_startup_64() deferred setting PGE in cr4: + * probe_page_size_mask() sets it on the boot cpu, + * but it needs to be set on each secondary cpu. + */ + cr4_set_bits(X86_CR4_PGE); + }
/* * Load microcode on this cpu if a valid microcode is available. --- a/arch/x86/kernel/espfix_64.c +++ b/arch/x86/kernel/espfix_64.c @@ -132,9 +132,10 @@ void __init init_espfix_bsp(void) * area to ensure it is mapped into the shadow user page * tables. */ - if (IS_ENABLED(CONFIG_KAISER)) + if (kaiser_enabled) { set_pgd(native_get_shadow_pgd(pgd_p), __pgd(_KERNPG_TABLE | __pa((pud_t *)espfix_pud_page))); + }
/* Randomize the locations */ init_espfix_random(); --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -183,8 +183,8 @@ ENTRY(secondary_startup_64) movq $(init_level4_pgt - __START_KERNEL_map), %rax 1:
- /* Enable PAE mode and PGE */ - movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx + /* Enable PAE and PSE, but defer PGE until kaiser_enabled is decided */ + movl $(X86_CR4_PAE | X86_CR4_PSE), %ecx movq %rcx, %cr4
/* Setup early boot stage 4 level pagetables. */ --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -165,7 +165,7 @@ static void __init probe_page_size_mask( cr4_set_bits_and_update_boot(X86_CR4_PSE);
/* Enable PGE if available */ - if (cpu_has_pge) { + if (cpu_has_pge && !kaiser_enabled) { cr4_set_bits_and_update_boot(X86_CR4_PGE); __supported_pte_mask |= _PAGE_GLOBAL; } else --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -395,6 +395,16 @@ void __init cleanup_highmap(void) continue; if (vaddr < (unsigned long) _text || vaddr > end) set_pmd(pmd, __pmd(0)); + else if (kaiser_enabled) { + /* + * level2_kernel_pgt is initialized with _PAGE_GLOBAL: + * clear that now. This is not important, so long as + * CR4.PGE remains clear, but it removes an anomaly. + * Physical mapping setup below avoids _PAGE_GLOBAL + * by use of massage_pgprot() inside pfn_pte() etc. + */ + set_pmd(pmd, pmd_clear_flags(*pmd, _PAGE_GLOBAL)); + } } }
--- a/arch/x86/mm/kaiser.c +++ b/arch/x86/mm/kaiser.c @@ -17,7 +17,9 @@ #include <asm/pgalloc.h> #include <asm/desc.h>
-#ifdef CONFIG_KAISER +int kaiser_enabled __read_mostly = 1; +EXPORT_SYMBOL(kaiser_enabled); /* for inlined TLB flush functions */ + __visible DEFINE_PER_CPU_USER_MAPPED(unsigned long, unsafe_stack_register_backup);
@@ -168,8 +170,8 @@ static pte_t *kaiser_pagetable_walk(unsi return pte_offset_kernel(pmd, address); }
-int kaiser_add_user_map(const void *__start_addr, unsigned long size, - unsigned long flags) +static int kaiser_add_user_map(const void *__start_addr, unsigned long size, + unsigned long flags) { int ret = 0; pte_t *pte; @@ -178,6 +180,15 @@ int kaiser_add_user_map(const void *__st unsigned long end_addr = PAGE_ALIGN(start_addr + size); unsigned long target_address;
+ /* + * It is convenient for callers to pass in __PAGE_KERNEL etc, + * and there is no actual harm from setting _PAGE_GLOBAL, so + * long as CR4.PGE is not set. But it is nonetheless troubling + * to see Kaiser itself setting _PAGE_GLOBAL (now that "nokaiser" + * requires that not to be #defined to 0): so mask it off here. + */ + flags &= ~_PAGE_GLOBAL; + for (; address < end_addr; address += PAGE_SIZE) { target_address = get_pa_from_mapping(address); if (target_address == -1) { @@ -264,6 +275,8 @@ void __init kaiser_init(void) { int cpu;
+ if (!kaiser_enabled) + return; kaiser_init_all_pgds();
for_each_possible_cpu(cpu) { @@ -312,6 +325,8 @@ void __init kaiser_init(void) /* Add a mapping to the shadow mapping, and synchronize the mappings */ int kaiser_add_mapping(unsigned long addr, unsigned long size, unsigned long flags) { + if (!kaiser_enabled) + return 0; return kaiser_add_user_map((const void *)addr, size, flags); }
@@ -323,6 +338,8 @@ void kaiser_remove_mapping(unsigned long unsigned long addr, next; pgd_t *pgd;
+ if (!kaiser_enabled) + return; pgd = native_get_shadow_pgd(pgd_offset_k(start)); for (addr = start; addr < end; pgd++, addr = next) { next = pgd_addr_end(addr, end); @@ -344,6 +361,8 @@ static inline bool is_userspace_pgd(pgd_
pgd_t kaiser_set_shadow_pgd(pgd_t *pgdp, pgd_t pgd) { + if (!kaiser_enabled) + return pgd; /* * Do we need to also populate the shadow pgd? Check _PAGE_USER to * skip cases like kexec and EFI which make temporary low mappings. @@ -400,4 +419,3 @@ void kaiser_flush_tlb_on_return_to_user( X86_CR3_PCID_USER_FLUSH | KAISER_SHADOW_PGD_OFFSET); } EXPORT_SYMBOL(kaiser_flush_tlb_on_return_to_user); -#endif /* CONFIG_KAISER */ --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -341,16 +341,12 @@ static inline void _pgd_free(pgd_t *pgd) } #else
-#ifdef CONFIG_KAISER /* - * Instead of one pmd, we aquire two pmds. Being order-1, it is + * Instead of one pgd, Kaiser acquires two pgds. Being order-1, it is * both 8k in size and 8k-aligned. That lets us just flip bit 12 * in a pointer to swap between the two 4k halves. */ -#define PGD_ALLOCATION_ORDER 1 -#else -#define PGD_ALLOCATION_ORDER 0 -#endif +#define PGD_ALLOCATION_ORDER kaiser_enabled
static inline pgd_t *_pgd_alloc(void) { --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -39,8 +39,7 @@ static void load_new_mm_cr3(pgd_t *pgdir { unsigned long new_mm_cr3 = __pa(pgdir);
-#ifdef CONFIG_KAISER - if (this_cpu_has(X86_FEATURE_PCID)) { + if (kaiser_enabled && this_cpu_has(X86_FEATURE_PCID)) { /* * We reuse the same PCID for different tasks, so we must * flush all the entries for the PCID out when we change tasks. @@ -57,7 +56,6 @@ static void load_new_mm_cr3(pgd_t *pgdir new_mm_cr3 |= X86_CR3_PCID_KERN_FLUSH; kaiser_flush_tlb_on_return_to_user(); } -#endif /* CONFIG_KAISER */
/* * Caution: many callers of this function expect