From: Arik Nemtsov arik@wizery.com
commit 59021c675995281d453eee45b3e2e1e3edbc0ec2 upstream.
The previous approach simply ignored chandef restrictions when calculating the appropriate peer BW for a WIDER_BW peer. This could result in a regulatory violation if both peers indicated 80MHz support, but the regdomain forbade it.
Change the approach to setting a WIDER_BW peer's BW. Don't exempt it from the chandef width at first. If during TDLS negotiation the chandef width is upgraded, update the peer's BW to match.
Fixes: 0fabfaafec3a ("mac80211: upgrade BW of TDLS peers when possible") Signed-off-by: Arik Nemtsov arikx.nemtsov@intel.com Signed-off-by: Emmanuel Grumbach emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- net/mac80211/ieee80211_i.h | 4 ++++ net/mac80211/tdls.c | 38 ++++++++++++++++++++++++++++++++------ net/mac80211/vht.c | 30 +++++++++++++++++++++++++----- 3 files changed, 61 insertions(+), 11 deletions(-)
--- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1706,6 +1706,10 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(stru enum ieee80211_sta_rx_bandwidth ieee80211_sta_cap_rx_bw(struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); +enum ieee80211_sta_rx_bandwidth +ieee80211_chan_width_to_rx_bw(enum nl80211_chan_width width); +enum nl80211_chan_width ieee80211_sta_cap_chan_bw(struct sta_info *sta); +void ieee80211_sta_set_rx_nss(struct sta_info *sta); u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, enum ieee80211_band band); --- a/net/mac80211/tdls.c +++ b/net/mac80211/tdls.c @@ -4,7 +4,7 @@ * Copyright 2006-2010 Johannes Berg johannes@sipsolutions.net * Copyright 2014, Intel Corporation * Copyright 2014 Intel Mobile Communications GmbH - * Copyright 2015 Intel Deutschland GmbH + * Copyright 2015 - 2016 Intel Deutschland GmbH * * This file is GPLv2 as found in COPYING. */ @@ -15,6 +15,7 @@ #include <linux/rtnetlink.h> #include "ieee80211_i.h" #include "driver-ops.h" +#include "rate.h"
/* give usermode some time for retries in setting up the TDLS session */ #define TDLS_PEER_SETUP_TIMEOUT (15 * HZ) @@ -302,7 +303,7 @@ ieee80211_tdls_chandef_vht_upgrade(struc /* IEEE802.11ac-2013 Table E-4 */ u16 centers_80mhz[] = { 5210, 5290, 5530, 5610, 5690, 5775 }; struct cfg80211_chan_def uc = sta->tdls_chandef; - enum nl80211_chan_width max_width = ieee80211_get_sta_bw(&sta->sta); + enum nl80211_chan_width max_width = ieee80211_sta_cap_chan_bw(sta); int i;
/* only support upgrading non-narrow channels up to 80Mhz */ @@ -1242,18 +1243,44 @@ int ieee80211_tdls_mgmt(struct wiphy *wi return ret; }
-static void iee80211_tdls_recalc_chanctx(struct ieee80211_sub_if_data *sdata) +static void iee80211_tdls_recalc_chanctx(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta) { struct ieee80211_local *local = sdata->local; struct ieee80211_chanctx_conf *conf; struct ieee80211_chanctx *ctx; + enum nl80211_chan_width width; + struct ieee80211_supported_band *sband;
mutex_lock(&local->chanctx_mtx); conf = rcu_dereference_protected(sdata->vif.chanctx_conf, lockdep_is_held(&local->chanctx_mtx)); if (conf) { + width = conf->def.width; + sband = local->hw.wiphy->bands[conf->def.chan->band]; ctx = container_of(conf, struct ieee80211_chanctx, conf); ieee80211_recalc_chanctx_chantype(local, ctx); + + /* if width changed and a peer is given, update its BW */ + if (width != conf->def.width && sta && + test_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW)) { + enum ieee80211_sta_rx_bandwidth bw; + + bw = ieee80211_chan_width_to_rx_bw(conf->def.width); + bw = min(bw, ieee80211_sta_cap_rx_bw(sta)); + if (bw != sta->sta.bandwidth) { + sta->sta.bandwidth = bw; + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); + /* + * if a TDLS peer BW was updated, we need to + * recalc the chandef width again, to get the + * correct chanctx min_def + */ + ieee80211_recalc_chanctx_chantype(local, ctx); + } + } + } mutex_unlock(&local->chanctx_mtx); } @@ -1350,8 +1377,6 @@ int ieee80211_tdls_oper(struct wiphy *wi break; }
- iee80211_tdls_recalc_chanctx(sdata); - mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, peer); if (!sta) { @@ -1360,6 +1385,7 @@ int ieee80211_tdls_oper(struct wiphy *wi break; }
+ iee80211_tdls_recalc_chanctx(sdata, sta); iee80211_tdls_recalc_ht_protection(sdata, sta);
set_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH); @@ -1390,7 +1416,7 @@ int ieee80211_tdls_oper(struct wiphy *wi iee80211_tdls_recalc_ht_protection(sdata, NULL); mutex_unlock(&local->sta_mtx);
- iee80211_tdls_recalc_chanctx(sdata); + iee80211_tdls_recalc_chanctx(sdata, NULL); break; default: ret = -ENOTSUPP; --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -299,7 +299,30 @@ enum ieee80211_sta_rx_bandwidth ieee8021 return IEEE80211_STA_RX_BW_80; }
-static enum ieee80211_sta_rx_bandwidth +enum nl80211_chan_width ieee80211_sta_cap_chan_bw(struct sta_info *sta) +{ + struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; + u32 cap_width; + + if (!vht_cap->vht_supported) { + if (!sta->sta.ht_cap.ht_supported) + return NL80211_CHAN_WIDTH_20_NOHT; + + return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + NL80211_CHAN_WIDTH_40 : NL80211_CHAN_WIDTH_20; + } + + cap_width = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; + + if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) + return NL80211_CHAN_WIDTH_160; + else if (cap_width == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) + return NL80211_CHAN_WIDTH_80P80; + + return NL80211_CHAN_WIDTH_80; +} + +enum ieee80211_sta_rx_bandwidth ieee80211_chan_width_to_rx_bw(enum nl80211_chan_width width) { switch (width) { @@ -327,10 +350,7 @@ enum ieee80211_sta_rx_bandwidth ieee8021
bw = ieee80211_sta_cap_rx_bw(sta); bw = min(bw, sta->cur_max_bandwidth); - - /* do not cap the BW of TDLS WIDER_BW peers by the bss */ - if (!test_sta_flag(sta, WLAN_STA_TDLS_WIDER_BW)) - bw = min(bw, ieee80211_chan_width_to_rx_bw(bss_width)); + bw = min(bw, ieee80211_chan_width_to_rx_bw(bss_width));
return bw; }