This is a note to let you know that I've just added the patch titled
usb: dwc3: make sure UX_EXIT_PX is cleared
to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git%3Ba=su...
The filename of the patch is: usb-dwc3-make-sure-ux_exit_px-is-cleared.patch and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Sun Mar 18 16:55:33 CET 2018
From: Felipe Balbi felipe.balbi@linux.intel.com Date: Wed, 3 Aug 2016 14:16:15 +0300 Subject: usb: dwc3: make sure UX_EXIT_PX is cleared
From: Felipe Balbi felipe.balbi@linux.intel.com
[ Upstream commit 1966b8657d058ecb95031809b607bf3fd1e01c10 ]
This bit is only supposed to be used with known buggy PHYs, however some platforms might erroneously set it. In order to avoid it, let's make sure this bit is always cleared. If some PHY needs this, we will need to add a quirk flag.
Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc3/core.c | 6 ++++++ drivers/usb/dwc3/core.h | 1 + 2 files changed, 7 insertions(+)
--- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -464,6 +464,12 @@ static int dwc3_phy_setup(struct dwc3 *d reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
/* + * Make sure UX_EXIT_PX is cleared as that causes issues with some + * PHYs. Also, this bit is not supposed to be used in normal operation. + */ + reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX; + + /* * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY * to '0' during coreConsultant configuration. So default value * will be '0' when the core is reset. Application needs to set it --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -223,6 +223,7 @@ #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) #define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29) #define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28) +#define DWC3_GUSB3PIPECTL_UX_EXIT_PX (1 << 27) #define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24) #define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19) #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7)
Patches currently in stable-queue which might be from felipe.balbi@linux.intel.com are
queue-4.9/usb-dwc2-make-sure-we-disconnect-the-gadget-state.patch queue-4.9/usb-gadget-dummy_hcd-fix-wrong-power-status-bit-clear-reset-in-dummy_hub_control.patch queue-4.9/usb-dwc3-make-sure-ux_exit_px-is-cleared.patch